Curtiss-Wright XP-55 Bloccante - Foto ed Video

Curtiss-Wright XP-55 Ascender
Paese	Usa
Ruolo	Combattente
Prodotto	Il 19 luglio 1943
Costruito	3

Le Curtiss-Wright XP-55 Ascender Il CW-24 è un prototipo di caccia statunitense costruito dalla Curtiss-Wright negli anni '40. Insieme al Vultee XP-54 e al Northrop XP-56, fu il risultato della proposta R-40C del United States Army Air Corps emessa il 27 novembre 1939 per aerei con migliori prestazioni, armamento e visibilità del pilota sui caccia esistenti; ha specificamente permesso progetti di aeromobili non convenzionali. Un design molto insolito per il suo tempo, aveva una configurazione canard, un motore montato sul retro, ali spazzate e due code verticali. A causa del suo design pusher, è stato sarcasticamente indicato come il "Ass-ender". Come l'XP-54, l'Ascender fu inizialmente progettato per il motore Pratt & Whitney X-1800 e dovette essere ridisegnato quando quel progetto di motore fu cancellato. Fu anche il primo aereo da caccia Curtiss ad usare il carrello di atterraggio del triciclo.

fonte: Curtiss-Wright XP-55 Ascender su Wikipedia

XP-55 Ascender Walk Around
Fotografo	Michael Benolkin
Localizzazione	Inconsapevole
Foto	39

XP-55 Ascender 01

XP-55 Ascender 02

XP-55 Ascender 03

XP-55 Ascender 05

XP-55 Ascender 04

XP-55 Ascender 06

XP-55 Ascender 07

XP-55 Ascender 08

XP-55 Ascender 09

Click on a photo and use the mouse scroll to view all photos

Aspetta, cerca Curtiss-Wright XP-55 Ascender per te...

Vedi anche:

General Characteristics and Role

The Curtiss XP-55 Ascender (Curtiss-Sperry Model 24) was an experimental fighter prototype developed for the U.S. Army Air Forces (USAAF) during World War II. It was the product of the 1940 “R-40C” proposal for unconventional aircraft designs, alongside the Northrop XP-56 Black Bullet and Vultee XP-54 Swoose Goose. The Ascender featured a highly radical and futuristic design for its time: a tailless canard configuration with the engine mounted at the rear, driving a pusher propeller. This layout was intended to improve aerodynamics and provide an unobstructed forward field of fire. Despite the design’s potential, the XP-55 suffered from stability issues, poor low-speed performance, and did not live up to performance expectations, leading to its cancellation after three prototypes were built.

Property	Typical Value (XP-55)
Ruolo	Experimental Fighter Prototype
National Origin	Stati Uniti
Produttore	Curtiss-Wright Corporation
First Flight	13 July 1943
Numero costruito	3
Equipaggio	1 (Pilot)
Lunghezza	9.0 m (29 ft 6 in)
Apertura alare	12.4 m (40 ft 8 in)
Altezza	3.45 m (11 ft 4 in)
Empty Weight	2,884 kg (6,358 lb)
Max Takeoff Weight	3,792 kg (8,360 lb)

Powerplant and Design

Engine: One Allison V-1710-95 (F23R) liquid-cooled V12 engine.
Power Output: 954 kW (1,275 hp).
Propulsion: 3-bladed propeller in a pusher configuration (at the rear).
Maximum Speed: 628 km/h (390 mph; 339 kn) at 5,800 m (19,000 ft).
Range: 1,040 km (650 mi; 560 nmi).
Design Layout: Canard (small horizontal surface in the nose) and a mid-set wing with twin tail booms supporting the rudders. The main wings were swept back slightly.
Pilot Safety: Due to the rear-mounted propeller, the pilot was equipped with a system to jettison the propeller assembly before bailing out in an emergency.

Armament (Intended) and Service

Intended Armament: 2 x 20 mm cannon and 2 x .50 in (12.7 mm) machine guns, all mounted in the nose. (Prototypes often flew with reduced or no armament).
Service History: The first prototype crashed due to a stall/spin in a test flight. Despite modifications to the second and third prototypes, they were ultimately outclassed by conventional and early jet fighters.
Legacy: The XP-55’s radical configuration helped advance research into canard aerodynamics, a concept later successfully used in aircraft like the Saab Viggen and Eurofighter Typhoon.