Bell X-5

Bell X-5
Країні	Сша
Роль	Дослідницькі літаки
Перший політ	20 червня 1951 р.
Побудований	2

У 201 Дзвінок X-5 був першим літаком, здатним змінювати розмах крил у польоті. Він був натхненний неперевіреною конструкцією P.1101 часів німецької компанії Messerschmitt. На відміну від німецької конструкції, яка могла регулювати кут стрілоподібності крила лише на землі, інженери Bell розробили систему електродвигунів для регулювання стрілоподібності в польоті.

Джерело: Bell X-5 у Вікіпедії

Bell X-5 Walk Around
Photographers	Vladimir Yakubov
Localisation	The National Museum of the USAF
Photos	74

Bell X-5 01

Bell X-5 02

Bell X-5 03

Bell X-5 04

Bell X-5 05

Bell X-5 06

Bell X-5 07

Bell X-5 08

Bell X-5 09

Click on a photo and use the mouse scroll to view all photos

Зачекайте, шукаємо для вас Bell X-5...

Bell X-5 Walk Around
Photographers	John Heck
Localisation	The National Museum of the USAF
Photos	16

Читайте також:

The Quest for Versatile Flight

У 201 Дзвінок X-5 was a landmark experimental aircraft designed to test the feasibility of changing a wing’s sweep angle during flight. This “swing-wing” capability was intended to provide the best of both worlds: high lift for takeoff and landing (straight wings) and reduced drag for high-speed flight (swept wings). While inspired by wartime German research, the X-5 was the first aircraft capable of adjusting its sweep in the air, paving the way for future icons like the F-14 Tomcat and the B-1 Lancer.

Attribute	Technical Specification (Bell X-5)
Роль	Experimental Variable-Sweep Research Aircraft
команда	1 (Pilot)
First Flight	June 20, 1951
Силова установка	1 × Allison J35-A-17 turbojet
Thrust	4,900 lbf (21.8 kN)
Максимальна швидкість	1,150 km/h (715 mph) / Mach 0.98
Sweep Range	20° to 60° (Variable in flight)
Service Ceiling	15,200 meters (49,900 ft)

The Engineering of the Swing-Wing

The Compensation Mechanism: Simply sweeping a wing back moves the Center of Pressure rearward, which would normally make a plane dive uncontrollably. To fix this, the X-5’s wings translated forward along rails as they swept back, maintaining the aircraft’s balance.
German Origins: The X-5 design was heavily influenced by the unfinished Messerschmitt P.1101, which had wings that could be adjusted on the ground but not in flight. Bell engineers developed the complex electric motor and screw-jack system to enable in-flight movement.
Nose-Inlet Design: Like many early jets, the X-5 used a straight-through air intake in the nose, with the pilot sitting directly above the engine ducting.
Variable Drag: Pilots could change the sweep from 20° for landing to 60° for high-speed tests in less than 30 seconds.

Operational History & Safety Challenges

The Spin Problem: The X-5 was notoriously unstable in a spin. Because of the way the mass was distributed, once the aircraft began to spin, it was nearly impossible to recover. This flaw led to the loss of the second prototype and the death of Major Ray Popson in 1953.
Critical Data: Despite the risks, the X-5 program provided NASA (then NACA) and the Air Force with years of data on the aerodynamic loads and control difficulties of variable-geometry wings.
Legacy: The success of the “swing-wing” concept proved by the X-5 led directly to the development of the General Dynamics F-111 Aardvark and the Grumman F-14 Tomcat.
Preservation: The surviving X-5 is now part of the National Museum of the United States Air Force in Dayton, Ohio.