Arkiv for forfatter: SdKfz.000

Hawker orkanen Mk.I m / 3 figurer - Tamiya 37011

Bogført den Ændret den Af | Efterlad et svar
Hawker orkanen Mk.I med 3 figurer - Tamiya 37011

Tamiya

Ref 37011
TypeMock-up
Skala1/48
Emne

Hawker orkanen Mk.I med 3 figurer

Included aircraft parts are product of Italeri. Fabric-covered rear fuselage accurately reproduced in molded plastic. Cowlings may be detached to reveal the Merlin engine even after assembly. Includes photo-etched parts for cockpit details. 2 kinds of spinners and propellers included. 2 pilot and 1 commander figures manufactured by Tamiya (total of 3) and 6 Marking Options included. Comes with a Photographic Reference Manual (A5-sized, 36 pages).

Sammen med Spitfire Hawker orkan var en af de repræsentative RAF-krigere under Anden Verdenskrig. Denne lavvingede monoplan med bredsporet udtrækkeligt landingsstel og otte 7,7 mm maskingeværer inkorporerede gennemprøvede biplanfunktioner såsom en rørformet ramme. Selvom orkaner blev udkonkurreret af Luftwaffes mere avancerede Messerschmitt Bf 109E'er, så slaget om Storbritannien i juli 1940 Spitfires engagere eskorterende Bf109'ere, mens orkaner gik efter bombeflyene. Som et resultat af velovervejet enhedsledelse og pilottapperhed påførte RAF Luftwaffe store tab og var til sidst i stand til at kræve en hårdt kæmpet sejr. Denne Tamiya specielle udgivelse består af to producenter produkter for at give modelbyggere adgang til et eksklusivt sæt.

Kilde: Hawker Hurricane Mk.I on Tamiya

Fortsæt med at læse →

Visninger : 2246

Grumman F7F Tigercat – WalkAround

Bogført den Ændret den Af | Efterlad et svar
Grumman F7F-3 Tigercat

Grumman F7F Tigercat

LandUsa
CatégorieMilitærfly
TypeKampfly
Første flyvning2 November 1943

Den Grumman F7F Tigercat était le premier chasseur lourd bimoteur embarqué américain. Bien que nettement supérieur au F4U Corsair qui était considéré alors comme le meilleur chasseur de la marine, en arrivant que fin 1944, ces avions ne participèrent pas aux combats de la seconde guerre mondiale. Le Tigercat, produit à 362 unités, a été décliné en cinq versions différentes : – le F7F-1 : chasseur de jour monoplace (35 unités) – le F7F-2N : chasseur de nuit biplace (65 unités) – le F7F-3 : chasse de jour/reconnaissance photo (189 unités) – le F7F-3N : chasse de nuit (60 unités) – le F7F-4N : chasseur embarqué (13 unités)

Kilde:Tigertcat på Wikipedia

Fortsæt med at læse →

Udsigter : 5174

Den japanske flådes sub I-400 – Tamiya 89776

Bogført den Ændret den Af | Efterlad et svar
Japansk flåde ubåd I-400 - Tamiya 89776

Tamiya

Ref 89776
TypeMock-up
Skala1/350
Emne

Den japanske flådes ubåd I-400

Included clear hangar parts enable you to view the interior of the hangar after the model is assembled. Transparent parts for the Seiran aircraft allow you to leave the canopy unpainted for a more realistic appearance. Photo-etched parts for handrails and display stand nameplate are included. 4 metal type 95 torpedoes included. Guide stickers to aid with positioning photo-etched handrail posts are included. 48 1/350 scale crew figures included to liven up the model’s decks.

Dette er en 1/350 model af den japanske Navy Submarine I-400 med gennemsigtige hangardele. Oprettet som en del af en dristig plan om at angribe større byer i USA og Panamakanalen i de sidste faser af anden verdenskrig, havde disse tre teknologisk avancerede I-400 klasse store hangarskib ubåde aldrig chancen for at se handling på grund af Japans overgivelse.

Kilde: Japanese Navy Sub I-400 on Tamiya

Fortsæt med at læse →

Visninger : 1617

Russisk tung tank JS-2 1944 - Tamiya 32571

Bogført den Ændret den Af | Efterlad et svar
Russisk tung tank JS-2 1944 - Tamiya 32571

Tamiya

Ref 32571
TypeMock-up
Skala1/48
Emne

Russisk tung tank JS-2 1944

Turret and hull feature a realistic cast metal surface texture. The assembly-type tracks offer easy assembly and feature realistic sag effect. Includes 1 commander figure positioned in the cupola. Comes with 2 kinds of markings.

The Russian Heavy Tank JS-2 was built to counter the German Tiger I. The JS-2, which was put into production in December 1943 during the latter half of WWII, had a long powerful 122mm gun and superior armor. From August, 1944 the hatch on the front glacis was deleted, which greatly improved its frontal protection. The JS-2 was produced in the Chelyabinsk Kirov factory (ChKZ), and they proved to be effective as “breakthrough” tanks as well as combating German armor. The Tamiya 1/48 scale model kit faithfully captures the details of this iconic World War II machine.

Kilde: Steyr 1500A on Tamiya

Fortsæt med at læse →

Views : 2088

Tysk Steyr 1500A Kommandeurwagen – Tamiya 25149

Bogført den Ændret den Af | Efterlad et svar
Tysk Steyr 1500A Kommandeurwagen - Tamiya 25149

Tamiya

Ref 25149
TypeMock-up
Skala1/35
Emne

German Steyr 1500A Kommandeurwagen HQ Staff Set (w/7 Figures)

You can choose to assemble the roof, trunk’s lid, and all four doors in either open or closed positions. The seats have a realistic textured finish. Kit includes a total of 7 figures to enable instant diorama creation straight from the box: 3 Tamiya figures (a standing officer, a seated driver, and a seated general officer) 4 ICM figures (a general officer, an adjutant, a female assistant, and a common soldier)

During WWII, the German army produced many different variants of the Steyr Type 1500A light vehicle. One of these variants was the Kommandeurwagen, which was used as a staff car to transport high ranking officers and commanders. Fitted with an 85hp engine, it had a maximum speed of 100km/h on paved roads. It was equipped with a front torsion bar and rear leaf spring suspension system and was appointed with leather seats. The Tamiya 1/35 scale plastic model kit faithfully brings all the details of the Steyr to life.

Kilde: Steyr 1500A on Tamiya

Fortsæt med at læse →

Views : 2813

Tysk Panzerkampfwagen 35(t) – Tamiya 25112

Bogført den Ændret den Af | Efterlad et svar
Tysk Panzerkampfwagen 35(t) - Tamiya 25112

Tamiya

Ref 25112
TypeMock-up
Skala1/35
Emne

Panzerkampfwagen 35(t)

This is a limited edition re-release of the 1/35 scale German Panzerkampfwagen 35t

Riveted construction and bogie-type suspension reproduced. Tracks feature one-piece straight sections for ease of assembly. Includes parts for MG37(t) machine guns, notek light, tools, and 12 early-type jerry cans. Commander figure may be assembled with a beret, side cap, or officer’s cap. 3 marking options included to depict tanks which saw action in Poland, France, and Russia. Tank parts are product of CMK.

Following Germany’s annexation of Czechoslovakia, the German army modified various Czech-made military hardware and pressed them into service. Among these was the LTvz.35 light tank built by Skoda, which was re-designated as the Pz.Kpfw.35(t). Med en bevæbning af en 37 mm hovedkanon og to 7,92 mm maskingeværer og en 120 hk væskekølet benzinmotor, der muliggjorde en maksimal hastighed på 34 km / t, var denne lette tanks kapacitet på niveau med den tyske hærs Panzer III mellemstore kampvogne. I begyndelsen af anden verdenskrig var 6. panserdivision udstyret med omkring 200 af disse kampvogne, og de blev brugt under invasionerne af Polen og Frankrig samt de tidlige stadier af invasionen af Rusland.

Kilde: Panzerkampfwagen 35(t) on Tamiya

Fortsæt med at læse →

Udsigter : 2042

Amerikansk hangarskib Yorktown – Tamiya 31712

Bogført den Ændret den Af | Efterlad et svar
Amerikansk hangarskib Yorktown - Tamiya 31712

Tamiya

Ref 31712
TypeMock-up
Skala1/700
Emne

Det amerikanske hangarskib Yorktown

1/700 skala plast samlesæt af Yorktown (CV-5) as she appeared during the Battle of Midway. Hanger doors may be depicted in open or closed position. Elevator at the stern may be depicted in up or down position. Comes with parts to depict F4F Wildcats, Douglas SBD-3 Dauntlesses, and Douglas TBD-1 Devastators.

Den USS Yorktown was completed in September 1937 as the first ship of her namesake-class and the U.S. Navy’s sixth aircraft carrier. When the Pacific War broke out, she became the flagship of Task Force 17 under the command of Rear Admiral Frank J. Fletcher and conducted a number of operations around the Pacific. During the Battle of the Coral Sea in May 1942, she helped thwart the Japanese Navy’s advance on New Guinea despite suffering severe damage. Subsequently, at the Battle of Midway, the Yorktown and her sister ships USS Enterprise and USS Hornet defeated the Japanese Mobile Fleet, but the Yorktown herself suffered severe damage by torpedo and bomb hits from the aircraft of the Japanese carrier Hiryu. She was finally sunk by torpedoes from the Japanese submarine I-168. The Tamiya 1/700 scale model is a precise replica assembly kit of this iconic carrier during WWII.

Kilde: U.S. Aircraft Carrier Yorktown on Tamiya

Fortsæt med at læse →

Views : 1678

Japansk Heavy Cruiser Chikuma - Tamiya 78027

Bogført den Ændret den Af | Efterlad et svar
Japansk tung krydser Chikuma - Tamiya 78027

Tamiya

Ref 78027
TypeMock-up
Skala1/350
Emne

Japansk tung krydser Chikuma

1/350 scale plastic assembly kit of the Chikuma before she was refitted with additional AA guns, radar, and air defense command center. Model may be assembled as a full hull model mounted on a display stand or a waterline model. The use of small screws enables secure attachment of the hull and deck. Highly detailed main gun turrets. Gun barrels articulate in 2 different angles. V-shaped ventilator ducts and funnels included. Mast components are made from ABS plastic for greater durability. Photo-etched parts such as aircraft trolleys, catapult rails, and mast braces included. Anchor chains and propeller shafts are made with metal parts. Floatplanes included and come with display stands. Kit includes a Reference Booklet which provides background information for the Chikuma as well as a full color Painting Guide.

Chikuma was the last heavy cruiser the Imperial Japanese Navy constructed during WWII and was completed in May 1939 as the second ship of the Tone-class. Her four twin 20.3cm guns were located at the bow to enable unhindered operation of up to 6 floatplanes at the stern. Her design also enabled a top speed of 35 knots and a long range. She was assigned to the Carrier Mobile Fleet with her sister ship Tone. During the Pearl Harbor Attack in December 1941, her floatplanes carried out pre-attack reconnaissance over the Pearl Harbor, which greatly contributed to the IJN’s success of the operation. She was also active during the Battle of Midway and the Solomon Islands campaign. During the Battle of the Leyte Gulf in October 1944, she was the flagship of Admiral Kurita’s fleet and contributed to the sinking of the USS Gambier Bay but she was in turn damaged by torpedoes and scuttled off the coast of Samar Island.

Kilde: Japanese Heavy Cruiser Chikuma on Tamiya

Fortsæt med at læse →

Views : 2721

Avro Lancaster B Mk.I - B Mk.III - Tamiya 61111

Bogført den Ændret den Af | Efterlad et svar
Avro Lancaster B Mk.I - B Mk.III - Tamiya 61111

Tamiya

Ref 61111
TypeMock-up
Skala1/48
Emne

Avro Lancaster B Mk.III Special "Dambuster" / B Mk.I Special "Grand Slam Bomber"

Sættet indeholder dele, der viser Lancaster as either a Mk.I Grand Slam or a Mk.III Dambuster variant. Based on the latest research information, details such as early-type propellers and late-type front canopy have been faithfully depicted. Parts for two Merlin engines are included. Engine nacelles can be depicted in either open or closed state. The gun turrets are all movable. Pre-painted as well as unpainted canopy parts are included. Comes with 3 marking options and 5 crew figures.

Den Avro Lancaster was one of the RAF’s main heavy bombers during WWII. Among the many variants, the Mk.III “Dambuster” and Mk.I “Grand Slam Bomber” were best known and the most famous. The “Dambuster” was modified to attack dams in Germany. It was equipped with special bouncing bombs which would skip across the water to the dam wall and explode below the surface of water to inflict structural damage. The “Grand Slam Bomber” was designed to carry the 10-ton Grand Slam earthquake bomb and its bomb bay doors and dorsal machine guns were removed to reduce weight in order to do so. These Lancaster’s used the Grand Slam on such important targets such as U-boat bases and rocket manufacturing sites. The Tamiya model faithfully captures all the detail of this historic and famous WWII aircraft in 1/48 scale

Kilde: Avro Lancaster B Mk.I – B Mk.III on Tamiya

Fortsæt med at læse →

Set antal gange : 1776

Ilyushin IL-2 Shturmovik – Tamiya 61113

Bogført den Ændret den Af | Efterlad et svar
Ilyushin IL-2 Shturmovik - Tamiya 61113

Tamiya

Ref 61113
TypeMock-up
Skala1/48
Emne

Ilyushin IL-2 Shturmovik

Modellen viser en sen variant af Ilyushin IL-2 Shturmovik (two-seat cockpit and swept outer wings) 3 kinds of canopies included and each may be depicted in either open or closed position. Highly-detailed cockpit accurately depicts the fuel tank positioned between pilot and gunner. Radiator and oil cooler reproduced accurately. Includes 2 kinds of covers for 23mm cannons. Parts for 100kg and 250kg bombs included. 3 kinds of rocket launcher parts included, Comes with 3 decal marking options.

Den Ilyushin Il-2 var et af de mest betydningsfulde jordangrebsfly under anden verdenskrig. Det inkorporerede en robust monocoque konstruktion og fremragende rustningsbeskyttelse for at gøre den perfekt til jordangrebsoperationer. Det blev oprindeligt udtænkt som et tosædet design, men på grund af vægtproblemer blev det redesignet som et lettere enkeltsædet fly i 1940. Da produktionen begyndte i 1941, blev flyet udpeget som Il-2. Store tab af enkeltsædet fly under kamp tvang tilføjelsen af en bagskytteposition i 1943. Senere varianter indeholdt forbedringer såsom fejede ydre vinger for bedre håndtering. Il-2 bidrog meget til den endelige russiske sejr over Nazityskland. Joseph Stalin selv bemærkede berømt, at flyet var lige så vigtigt for den russiske hær som luft og brød.

Kilde: Ilyushin IL-2 Shturmovik on Tamiya

Fortsæt med at læse →

Set antal gange : 1745