Forfatterarkiver: SdKfz.000

Hawker Hurricane Mk.I m/3 Figurer – Tamiya 37011

Skrevet den, Endret på Av | legg igjen et svar
Hawker Hurricane Mk.I m/3 Figurer - Tamiya 37011

Tamiya

Ref 37011
TypeComp
Skala1/48
Emnet

Hawker Hurricane Mk.I w/3 Figures

Included aircraft parts are product of Italeri. Fabric-covered rear fuselage accurately reproduced in molded plastic. Cowlings may be detached to reveal the Merlin engine even after assembly. Includes photo-etched parts for cockpit details. 2 kinds of spinners and propellers included. 2 pilot and 1 commander figures manufactured by Tamiya (total of 3) and 6 Marking Options included. Comes with a Photographic Reference Manual (A5-sized, 36 pages).

Together with the Spitfire, the Hawker orkan var en av de representative RAF-krigerne under andre verdenskrig. Dette lavvingede monoplanet med bredsporet uttrekkbart landingsunderstell og åtte 7,7 mm maskingevær hadde velprøvde dobbeltplanfunksjoner som en rørformet ramme. Selv om Hurricanes ble utkonkurrert av Luftwaffes mer avanserte Messerschmitt Bf 109E, så slaget om Storbritannia i juli 1940 at Spitfires eskorterte Bf109 mens Hurricanes gikk etter bombeflyene. Som et resultat av fornuftig enhetsledelse og pilottapperhet påførte RAF Luftwaffe store tap og var til slutt i stand til å hevde en hardt tilkjempet seier. Denne Tamiya-spesialutgivelsen består av to produsentprodukter for å gi modellbyggere tilgang til ett eksklusivt sett.

Kilde: Hawker Hurricane Mk.I on Tamiya

Fortsett å lese →

Views : 2220

Grumman F7F Tigercat – WalkAround

Skrevet den, Endret på Av | legg igjen et svar
Grumman F7F-3 Tigercat

Grumman F7F Tigercat

LandNorge , Norge
KategoriskMilitære fly
TypeJagerfly
Første flytur2. november 1943

Le Grumman F7F Tigercat était le premier chasseur lourd bimoteur embarqué américain. Bien que nettement supérieur au F4U Corsair qui était considéré alors comme le meilleur chasseur de la marine, en arrivant que fin 1944, ces avions ne participèrent pas aux combats de la seconde guerre mondiale. Le Tigercat, produit à 362 unités, a été décliné en cinq versions différentes : – le F7F-1 : chasseur de jour monoplace (35 unités) – le F7F-2N : chasseur de nuit biplace (65 unités) – le F7F-3 : chasse de jour/reconnaissance photo (189 unités) – le F7F-3N : chasse de nuit (60 unités) – le F7F-4N : chasseur embarqué (13 unités)

Kilde:Tigertcat på Wikipedia

Fortsett å lese →

Visninger : 5150

Japansk marine sub I-400 – Tamiya 89776

Skrevet den, Endret på Av | legg igjen et svar
Japansk marine sub I-400 - Tamiya 89776

Tamiya

Ref 89776
TypeComp
Skala1/350
Emnet

Japanese Navy Sub I-400

Included clear hangar parts enable you to view the interior of the hangar after the model is assembled. Transparent parts for the Seiran aircraft allow you to leave the canopy unpainted for a more realistic appearance. Photo-etched parts for handrails and display stand nameplate are included. 4 metal type 95 torpedoes included. Guide stickers to aid with positioning photo-etched handrail posts are included. 48 1/350 scale crew figures included to liven up the model’s decks.

This is a 1/350 model of the Japanese Navy Submarine I-400 with transparent hangar parts. Created as part of a daring plan to attack major cities in the United States and the Panama Canal in the last stages of WWII, these three technologically advanced I-400 class large aircraft carrier submarines never had the chance to see action due to the surrender of Japan.

Kilde: Japanese Navy Sub I-400 on Tamiya

Fortsett å lese →

Views : 1588

Russisk tung tank JS-2 1944 - Tamiya 32571

Skrevet den, Endret på Av | legg igjen et svar
Russisk tung tank JS-2 1944 - Tamiya 32571

Tamiya

Ref 32571
TypeComp
Skala1/48
Emnet

Russisk tung tank JS-2 1944

Turret and hull feature a realistic cast metal surface texture. The assembly-type tracks offer easy assembly and feature realistic sag effect. Includes 1 commander figure positioned in the cupola. Comes with 2 kinds of markings.

The Russian Heavy Tank JS-2 was built to counter the German Tiger I. The JS-2, which was put into production in December 1943 during the latter half of WWII, had a long powerful 122mm gun and superior armor. From August, 1944 the hatch on the front glacis was deleted, which greatly improved its frontal protection. The JS-2 was produced in the Chelyabinsk Kirov factory (ChKZ), and they proved to be effective as “breakthrough” tanks as well as combating German armor. The Tamiya 1/48 scale model kit faithfully captures the details of this iconic World War II machine.

Kilde: Steyr 1500A on Tamiya

Fortsett å lese →

Visninger : 2063

Tyske Steyr 1500A Kommandeurwagen – Tamiya 25149

Skrevet den, Endret på Av | legg igjen et svar
Tyske Steyr 1500A Kommandeurwagen - Tamiya 25149

Tamiya

Ref 25149
TypeComp
Skala1/35
Emnet

Tysk Steyr 1500A Kommandeurwagen HQ Staff Set (m / 7 tall)

You can choose to assemble the roof, trunk’s lid, and all four doors in either open or closed positions. The seats have a realistic textured finish. Kit includes a total of 7 figures to enable instant diorama creation straight from the box: 3 Tamiya figures (a standing officer, a seated driver, and a seated general officer) 4 ICM figures (a general officer, an adjutant, a female assistant, and a common soldier)

Under andre verdenskrig produserte den tyske hæren mange forskjellige varianter av Steyr Type 1500A lett kjøretøy. En av disse variantene var Kommandeurwagen, som ble brukt som stabsbil for å transportere høytstående offiserer og befal. Den var utstyrt med en motor på 85 hk, og hadde en maksimal hastighet på 100 km/t på asfalterte veier. Den var utstyrt med en torsjonsstang foran og fjærfjæringssystem bak og ble utstyrt med skinnseter. Tamiya 1/35 skala plastmodellsett gir trofast liv til alle detaljene i Steyr.

Kilde: Steyr 1500A on Tamiya

Fortsett å lese →

Views : 2785

Tysk Panzerkampfwagen 35(t) – Tamiya 25112

Skrevet den, Endret på Av | legg igjen et svar
Tysk Panzerkampfwagen 35(t) - Tamiya 25112

Tamiya

Ref 25112
TypeComp
Skala1/35
Emnet

Panzerkampfwagen 35(t)

Dette er en begrenset utgave av den tyske Panzerkampfwagen 35t i skala 1/35

Riveted construction and bogie-type suspension reproduced. Tracks feature one-piece straight sections for ease of assembly. Includes parts for MG37(t) machine guns, notek light, tools, and 12 early-type jerry cans. Commander figure may be assembled with a beret, side cap, or officer’s cap. 3 marking options included to depict tanks which saw action in Poland, France, and Russia. Tank parts are product of CMK.

Following Germany’s annexation of Czechoslovakia, the German army modified various Czech-made military hardware and pressed them into service. Among these was the LTvz.35 light tank built by Skoda, which was re-designated as the Pz.Kpfw.35(t). With an armament of one 37mm main gun and two 7.92mm machine guns and a 120hp liquid-cooled gasoline engine enabling a maximum speed of 34km/h, this light tank’s capabilities were on par with the German army’s Panzer III medium tanks. At the start of WWII, the 6th Panzer Division was equipped with about 200 of these tanks and they were used during the invasions of Poland and France, as well as the early stages of the invasion of Russia.

Kilde: Panzerkampfwagen 35(t) on Tamiya

Fortsett å lese →

Visninger : 2014

Amerikansk hangarskip Yorktown – Tamiya 31712

Skrevet den, Endret på Av | legg igjen et svar
Amerikansk hangarskip Yorktown - Tamiya 31712

Tamiya

Ref 31712
TypeComp
Skala1/700
Emnet

U.S. Aircraft Carrier Yorktown

1/700 scale plastic assembly kit of the Yorktown (CV-5) as she appeared during the Battle of Midway. Hanger doors may be depicted in open or closed position. Elevator at the stern may be depicted in up or down position. Comes with parts to depict F4F Wildcats, Douglas SBD-3 Dauntlesses, and Douglas TBD-1 Devastators.

Den USS Yorktown was completed in September 1937 as the first ship of her namesake-class and the U.S. Navy’s sixth aircraft carrier. When the Pacific War broke out, she became the flagship of Task Force 17 under the command of Rear Admiral Frank J. Fletcher and conducted a number of operations around the Pacific. During the Battle of the Coral Sea in May 1942, she helped thwart the Japanese Navy’s advance on New Guinea despite suffering severe damage. Subsequently, at the Battle of Midway, the Yorktown and her sister ships USS Enterprise and USS Hornet defeated the Japanese Mobile Fleet, but the Yorktown herself suffered severe damage by torpedo and bomb hits from the aircraft of the Japanese carrier Hiryu. She was finally sunk by torpedoes from the Japanese submarine I-168. The Tamiya 1/700 scale model is a precise replica assembly kit of this iconic carrier during WWII.

Kilde: U.S. Aircraft Carrier Yorktown on Tamiya

Fortsett å lese →

Visninger: 1651

Japansk Heavy Cruiser Chikuma – Tamiya 78027

Skrevet den, Endret på Av | legg igjen et svar
Japansk Heavy Cruiser Chikuma - Tamiya 78027

Tamiya

Ref 78027
TypeComp
Skala1/350
Emnet

Japanese Heavy Cruiser Chikuma

1/350 scale plastic assembly kit of the Chikuma before she was refitted with additional AA guns, radar, and air defense command center. Model may be assembled as a full hull model mounted on a display stand or a waterline model. The use of small screws enables secure attachment of the hull and deck. Highly detailed main gun turrets. Gun barrels articulate in 2 different angles. V-shaped ventilator ducts and funnels included. Mast components are made from ABS plastic for greater durability. Photo-etched parts such as aircraft trolleys, catapult rails, and mast braces included. Anchor chains and propeller shafts are made with metal parts. Floatplanes included and come with display stands. Kit includes a Reference Booklet which provides background information for the Chikuma as well as a full color Painting Guide.

Chikuma was the last heavy cruiser the Imperial Japanese Navy constructed during WWII and was completed in May 1939 as the second ship of the Tone-class. Her four twin 20.3cm guns were located at the bow to enable unhindered operation of up to 6 floatplanes at the stern. Her design also enabled a top speed of 35 knots and a long range. She was assigned to the Carrier Mobile Fleet with her sister ship Tone. During the Pearl Harbor Attack in December 1941, her floatplanes carried out pre-attack reconnaissance over the Pearl Harbor, which greatly contributed to the IJN’s success of the operation. She was also active during the Battle of Midway and the Solomon Islands campaign. During the Battle of the Leyte Gulf in October 1944, she was the flagship of Admiral Kurita’s fleet and contributed to the sinking of the USS Gambier Bay but she was in turn damaged by torpedoes and scuttled off the coast of Samar Island.

Kilde: Japanese Heavy Cruiser Chikuma on Tamiya

Fortsett å lese →

Visninger : 2697

Avro Lancaster B Mk.I – B Mk.III – Tamiya 61111

Skrevet den, Endret på Av | legg igjen et svar
Avro Lancaster B Mk.I - B Mk.III - Tamiya 61111

Tamiya

Ref 61111
TypeComp
Skala1/48
Emnet

Avro Lancaster B Mk.III Spesiell "Dambuster" / B Mk.I Spesiell "Grand Slam Bomber"

Settet inneholder deler som viser Lancaster as either a Mk.I Grand Slam or a Mk.III Dambuster variant. Based on the latest research information, details such as early-type propellers and late-type front canopy have been faithfully depicted. Parts for two Merlin engines are included. Engine nacelles can be depicted in either open or closed state. The gun turrets are all movable. Pre-painted as well as unpainted canopy parts are included. Comes with 3 marking options and 5 crew figures.

Den Avro Lancaster var en av RAFs viktigste tunge bombefly under andre verdenskrig. Blant de mange variantene var Mk.III "Dambuster" og Mk.I "Grand Slam Bomber" mest kjent og den mest berømte. "Dambuster" ble modifisert til å angripe dammer i Tyskland. Den var utstyrt med spesielle hoppende bomber som ville hoppe over vannet til damveggen og eksplodere under vannoverflaten for å påføre strukturelle skader. "Grand Slam Bomber" ble designet for å bære 10 tonn Grand Slam jordskjelv bombe og dens bombe bay dører og dorsal maskingevær ble fjernet for å redusere vekten for å gjøre det. Disse Lancaster har brukt Grand Slam på så viktige mål som ubåtbaser og rakettproduksjonssteder. Tamiya-modellen fanger trofast alle detaljene i dette historiske og berømte andre verdenskrigsflyet i 1/48 skala

Kilde: Avro Lancaster B Mk.I – B Mk.III on Tamiya

Fortsett å lese →

Views : 1751

Ilyushin IL-2 Shturmovik – Tamiya 61113

Skrevet den, Endret på Av | legg igjen et svar
Ilyushin IL-2 Shturmovik - Tamiya 61113

Tamiya

Ref 61113
TypeComp
Skala1/48
Emnet

Ilyushin IL-2 Shturmovik

Modellen viser en sen variant av Ilyushin IL-2 Shturmovik (two-seat cockpit and swept outer wings) 3 kinds of canopies included and each may be depicted in either open or closed position. Highly-detailed cockpit accurately depicts the fuel tank positioned between pilot and gunner. Radiator and oil cooler reproduced accurately. Includes 2 kinds of covers for 23mm cannons. Parts for 100kg and 250kg bombs included. 3 kinds of rocket launcher parts included, Comes with 3 decal marking options.

Den Ilyushin Il-2 var et av de mest betydningsfulle bakkeangrepsflyene under andre verdenskrig. Den inneholdt en solid monocoque-konstruksjon og utmerket panserbeskyttelse for å gjøre den perfekt for bakkeangrepsoperasjoner. Det ble opprinnelig tenkt som et toseters design, men på grunn av vektproblemer ble det redesignet som et lettere enseters fly i 1940. Da produksjonen startet i 1941, ble flyet betegnet som Il-2. Store tap av enseters fly under kamp tvang til å legge til en bakre skytterstilling i 1943. Senere varianter inneholdt forbedringer som feide ytre vinger for bedre håndtering. Il-2 bidro sterkt til den endelige russiske seieren over Nazi-Tyskland. Josef Stalin selv bemerket at flyet var like viktig for den russiske hæren som luft og brød.

Kilde: Ilyushin IL-2 Shturmovik on Tamiya

Fortsett å lese →

Visninger: 1722