Hawker Hurricane Mk.I s/3 Číslicemi - Tamiya 37011

Tamiya

Ref 37011
TypMaquette
Echelle1/48
Předmět

Hawker Hurricane Mk.I s/3 Číslicemi

Included aircraft parts are product of Italeri. Fabric-covered rear fuselage accurately reproduced in molded plastic. Cowlings may be detached to reveal the Merlin engine even after assembly. Includes photo-etched parts for cockpit details. 2 kinds of spinners and propellers included. 2 pilot and 1 commander figures manufactured by Tamiya (total of 3) and 6 Marking Options included. Comes with a Photographic Reference Manual (A5-sized, 36 pages).

Spolu se Spitfirem Hawkerský hurikán byl jedním z reprezentativních stíhacích letounů RAF z druhé světové války. Tento nízkokřídlá jednoplošník s širokoúhlým zatahovacím podvozkem a osmi 7,7mm kulomety obsahoval osvědčené dvouplošníkové prvky, jako je trubkový rám. Přestože hurikány byly překonány pokročilejším Messerschmitt Bf 109E luftwaffe, bitva o Británii v červenci 1940 viděla Spitfires, jak doprovázejí Bf109, zatímco Hurricanes šli po bombardérech. V důsledku uvážlivého řízení jednotek a statečnosti pilotů způsobila RAF Luftwaffe těžké ztráty a nakonec si mohla připsat těžce vybojované vítězství. Tato speciální verze Tamiya se shodí ze dvou výrobních produktů, které modeláři znější přístup k jedné exkluzivní sadě.

Zdroj: Hawker Hurricane Mk.I on Tamiya

Pokračovat ve čtení

Zobrazení : 2220

Grumman F7F-3 Tigercat

Grumman F7F Tigercat

ZeměSPOJENÉ STÁTY
KategorieVojenská letadla
TypStíhací letoun
První let2. listopadu 1943

Grumman F7F Tigercat était le premier chasseur lourd bimoteur embarqué américain. Bien que nettement supérieur au F4U Corsair qui était considéré alors comme le meilleur chasseur de la marine, en arrivant que fin 1944, ces avions ne participèrent pas aux combats de la seconde guerre mondiale. Le Tigercat, produit à 362 unités, a été décliné en cinq versions différentes : – le F7F-1 : chasseur de jour monoplace (35 unités) – le F7F-2N : chasseur de nuit biplace (65 unités) – le F7F-3 : chasse de jour/reconnaissance photo (189 unités) – le F7F-3N : chasse de nuit (60 unités) – le F7F-4N : chasseur embarqué (13 unités)

Zdroj:Tigertcat na Wikipedii

Pokračovat ve čtení

Počet zobrazení: 5150

Japonská námořní ponorka I-400 - Tamiya 89776

Tamiya

Ref 89776
TypMaquette
Měřítko1/350
Téma

Japanese Navy Sub I-400

Included clear hangar parts enable you to view the interior of the hangar after the model is assembled. Transparent parts for the Seiran aircraft allow you to leave the canopy unpainted for a more realistic appearance. Photo-etched parts for handrails and display stand nameplate are included. 4 metal type 95 torpedoes included. Guide stickers to aid with positioning photo-etched handrail posts are included. 48 1/350 scale crew figures included to liven up the model’s decks.

This is a 1/350 model of the Japanese Navy Submarine I-400 with transparent hangar parts. Created as part of a daring plan to attack major cities in the United States and the Panama Canal in the last stages of WWII, these three technologically advanced I-400 class large aircraft carrier submarines never had the chance to see action due to the surrender of Japan.

Zdroj: Japanese Navy Sub I-400 on Tamiya

Pokračovat ve čtení

Pohledy : 1588

Ruský těžký tank JS-2 1944 - Tamiya 32571

Tamiya

Ref 32571
TypMaquette
Echelle1/48
Předmět

Ruský těžký tank JS-2 1944

Turret and hull feature a realistic cast metal surface texture. The assembly-type tracks offer easy assembly and feature realistic sag effect. Includes 1 commander figure positioned in the cupola. Comes with 2 kinds of markings.

Ruský těžký tank JS-2 byl postaven jako protiváha německému Tigeru I. JS-2, který byl uveden do výroby v prosinci 1943 během druhé poloviny druhé světové války, měl dlouhé silné 122mm dělo a lepší pancíř. Od srpna 1944 byl odstraněn poklop na předním sklopu, což výrazně zlepšilo jeho čelní ochranu. JS-2 byl vyráběn v Kirovově továrně Čeljabinsk (ChKZ) a ukázal se jako účinný jako "průlomový" tank, stejně jako boj proti německému pancéřování. Stavebnice v měřítku Tamiya 1/48 věrně zachycuje detaily tohoto ikonického stroje z druhé světové války.

Zdroj: Steyr 1500A on Tamiya

Pokračovat ve čtení

Zobrazení: 2063

Německý Steyr 1500A Kommandeurwagen - Tamiya 25149

Tamiya

Ref 25149
TypMaquette
Měřítko1/35
Téma

Německá Steyr 1500A Kommandeurwagen HQ Staff Set (w/7 Obrázky)

You can choose to assemble the roof, trunk’s lid, and all four doors in either open or closed positions. The seats have a realistic textured finish. Kit includes a total of 7 figures to enable instant diorama creation straight from the box: 3 Tamiya figures (a standing officer, a seated driver, and a seated general officer) 4 ICM figures (a general officer, an adjutant, a female assistant, and a common soldier)

Během druhé světové války německá armáda vyráběla mnoho různých variant lehkého vozidla Steyr Type 1500A. Jednou z těchto variant byl Kommandeurwagen, který byl používán jako štábní vůz pro přepravu vysoce postavených důstojníků a velitelů. Byl vybaven motorem o výkonu 85 koní a na zpevněných cestách dosahoval maximální rychlosti 100 km/h. Byl vybaven přední torzní tyčí a systémem zavěšení zadních listových pružin a byl vybaven koženými sedadly. Plastiková modelová sada v měřítku Tamiya 1/35 věrně oživuje všechny detaily modelu Steyr.

Zdroj: Steyr 1500A on Tamiya

Pokračovat ve čtení

Pohledy : 2785

Německý Panzerkampfwagen 35(t) - Tamiya 25112

Tamiya

Ref 25112
TypMaquette
Měřítko1/35
Téma

Panzerkampfwagen 35(t)

Toto je limitovaná edice re-vydání německého Panzerkampfwagen 35t v měřítku 1/35

Riveted construction and bogie-type suspension reproduced. Tracks feature one-piece straight sections for ease of assembly. Includes parts for MG37(t) machine guns, notek light, tools, and 12 early-type jerry cans. Commander figure may be assembled with a beret, side cap, or officer’s cap. 3 marking options included to depict tanks which saw action in Poland, France, and Russia. Tank parts are product of CMK.

Po německé anexi Československa německá armáda upravila různé české vojenské vybavení a přitlačila je do služby. Mezi nimi byl i lehký tank LTvz.35 vyrobený společností Škoda, který byl přeznačen jako Pz.Kpfw.35(t). S výzbrojí jednoho hlavního děla 37 mm a dvou kulometů 7.92mm a kapalinou chlazeného benzínového motoru 120hp umožňujícího maximální rychlost 34 km / h byly schopnosti tohoto lehkého tanku na stejné úrovni jako střední tanky Panzer III německé armády. Na začátku druhé světové války byla 6. tanková divize vybavena asi 200 těmito tanky a byly použity během invazí do Polska a Francie, stejně jako v raných fázích invaze do Ruska.

Zdroj: Panzerkampfwagen 35(t) on Tamiya

Pokračovat ve čtení

Počet zobrazení: 2014

Americká letadlová loď Yorktown - Tamiya 31712

Tamiya

Ref 31712
TypMaquette
Echelle1/700
Předmět

Americká letadlová loď Yorktown

Plastová montážní sada v měřítku 1/700 Yorktown (CV-5) as she appeared during the Battle of Midway. Hanger doors may be depicted in open or closed position. Elevator at the stern may be depicted in up or down position. Comes with parts to depict F4F Wildcats, Douglas SBD-3 Dauntlesses, and Douglas TBD-1 Devastators.

USS Yorktown byla dokončena v září 1937 jako první loď své jmenovkyně a šestá letadlová loď amerického námořnictva. Když vypukla válka v Pacifiku, stala se vlajkovou lodí Task Force 17 pod velením kontradmirála Franka J. Fletchera a provedla řadu operací kolem Pacifiku. Během bitvy v Korálovém moři v květnu 1942 pomohla zmařit postup japonského námořnictva na Novou Guineu, přestože utrpěla vážné poškození. Následně, v bitvě u Midway, Yorktown a jeho sesterské lodě USS Enterprise a USS Hornet porazily japonskou mobilní flotilu, ale Yorktown sám utrpěl vážné poškození torpédy a bombami z letadel japonské letadlové lodi Hiryu. Nakonec byla potopena torpédy z japonské ponorky I-168. Model Tamiya v měřítku 1/700 je přesná replika montážní sady tohoto ikonického nosiče během druhé světové války.

Zdroj: U.S. Aircraft Carrier Yorktown on Tamiya

Pokračovat ve čtení

Zobrazení : 1651

Japonský těžký křižník Chikuma - Tamiya 78027

Tamiya

Ref 78027
TypMaquette
Echelle1/350
Předmět

Japonský těžký křižník Chikuma

1/350 scale plastic assembly kit of the Chikuma before she was refitted with additional AA guns, radar, and air defense command center. Model may be assembled as a full hull model mounted on a display stand or a waterline model. The use of small screws enables secure attachment of the hull and deck. Highly detailed main gun turrets. Gun barrels articulate in 2 different angles. V-shaped ventilator ducts and funnels included. Mast components are made from ABS plastic for greater durability. Photo-etched parts such as aircraft trolleys, catapult rails, and mast braces included. Anchor chains and propeller shafts are made with metal parts. Floatplanes included and come with display stands. Kit includes a Reference Booklet which provides background information for the Chikuma as well as a full color Painting Guide.

Chikuma byl poslední těžký křižník japonského císařského námořnictva postavený během druhé světové války a byl dokončen v květnu 1939 jako druhá loď třídy Tone. Její čtyři dvojitá 20,3cm děla byla umístěna na přídi, aby umožnila neomezený provoz až 6 hydroplánů na zádi. Její konstrukce také umožnila maximální rychlost 35 uzlů a dlouhý dosah. Byla přidělena k Carrier Mobile Fleet se svou sesterskou lodí Tone. Během útoku na Pearl Harbor v prosinci 1941 její hydroplány prováděly průzkum nad Pearl Harborem před útokem, což značně přispělo k úspěchu operace IJN. Byla také aktivní během bitvy u Midway a tažení na Šalamounovy ostrovy. Během bitvy v zálivu Leyte v říjnu 1944 byla vlajkovou lodí flotily admirála Kurity a přispěla k potopení USS Gambier Bay, ale byla poškozena torpédy a potopena u pobřeží ostrova Samar.

Zdroj: Japanese Heavy Cruiser Chikuma on Tamiya

Pokračovat ve čtení

Počet zobrazení: 2697

Avro Lancaster B Mk.I - B Mk.III - Tamiya 61111

Tamiya

Ref 61111
TypMaquette
Echelle1/48
Předmět

Avro Lancaster B Mk.III Special “Dambuster” / B Mk.I Special “Grand Slam Bomber”

Kit includes parts to depict the Lancaster as either a Mk.I Grand Slam or a Mk.III Dambuster variant. Based on the latest research information, details such as early-type propellers and late-type front canopy have been faithfully depicted. Parts for two Merlin engines are included. Engine nacelles can be depicted in either open or closed state. The gun turrets are all movable. Pre-painted as well as unpainted canopy parts are included. Comes with 3 marking options and 5 crew figures.

Avro Lancaster was one of the RAF’s main heavy bombers during WWII. Among the many variants, the Mk.III “Dambuster” and Mk.I “Grand Slam Bomber” were best known and the most famous. The “Dambuster” was modified to attack dams in Germany. It was equipped with special bouncing bombs which would skip across the water to the dam wall and explode below the surface of water to inflict structural damage. The “Grand Slam Bomber” was designed to carry the 10-ton Grand Slam earthquake bomb and its bomb bay doors and dorsal machine guns were removed to reduce weight in order to do so. These Lancaster’s used the Grand Slam on such important targets such as U-boat bases and rocket manufacturing sites. The Tamiya model faithfully captures all the detail of this historic and famous WWII aircraft in 1/48 scale

Zdroj: Avro Lancaster B Mk.I – B Mk.III on Tamiya

Pokračovat ve čtení

Views : 1751

Iljušin IL-2 Shturmovik - Tamiya 61113

Tamiya

Ref 61113
TypMaquette
Echelle1/48
Předmět

Iljušin IL-2 Shturmovik

Model depicts a late variant of the Iljušin IL-2 Shturmovik (two-seat cockpit and swept outer wings) 3 kinds of canopies included and each may be depicted in either open or closed position. Highly-detailed cockpit accurately depicts the fuel tank positioned between pilot and gunner. Radiator and oil cooler reproduced accurately. Includes 2 kinds of covers for 23mm cannons. Parts for 100kg and 250kg bombs included. 3 kinds of rocket launcher parts included, Comes with 3 decal marking options.

Iljušin Il-2 was one of the most significant ground-attack aircraft of WWII. It incorporated a sturdy monocoque construction and excellent armor protection to make it perfect for ground attack operations. It was initially conceived as a two-seat design but due to weight issues it was re-designed as a lighter single-seat aircraft in 1940. As production began in 1941, the aircraft was designated as the Il-2. Heavy losses of the single-seat aircraft during combat forced the addition of a rear gunner position in 1943. Later variants featured improvements such as swept outer wings for better handling. The Il-2 contributed greatly to the eventual Russian victory over Nazi Germany. Joseph Stalin himself famously noted that the aircraft was as vital to the Russian Army as air and bread.

Zdroj: Ilyushin IL-2 Shturmovik on Tamiya

Pokračovat ve čtení

Počet zobrazení: 1722