Author Archives: SdKfz.000

Hawker Hurricane Mk.I w/3 Figure – Tamiya 37011

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
Hawker Hurricane Mk.I w/3 Figure - Tamiya 37011

Tamiya

Ref 37011
TipComp
Skali1/48
Tema

Havker Hurricane Mk.I v / 3 Figure

Included aircraft parts are product of Italeri. Fabric-covered rear fuselage accurately reproduced in molded plastic. Cowlings may be detached to reveal the Merlin engine even after assembly. Includes photo-etched parts for cockpit details. 2 kinds of spinners and propellers included. 2 pilot and 1 commander figures manufactured by Tamiya (total of 3) and 6 Marking Options included. Comes with a Photographic Reference Manual (A5-sized, 36 pages).

Zajedno sa Spitfireom, Hawker Hurricane bio je jedan od predstavnika RAF boraca Drugog svetskog rata. Ovaj niskokrilac jednokrilac sa širokim stazama uvlači stajnog trapa i osam 7.7mm mitraljeza ugrađen dokazane dvokrilac karakteristike kao što su cevasti okvir. Iako su uragani nadmašili napredniji Messerschmitt Bf 109Es Luftvaffe-a, u bitci za Britaniju u julu 1940. godine Spitfires su se angažovali u pratnji Bf109, dok su uragani krenuli za bombarderima. Kao rezultat razboritog upravljanja jedinicom i hrabrosti pilota, RAF je naneo teške gubitke Luftvafeu i na kraju su mogli da tvrde teško izborenu pobedu. Ovo specijalno izdanje Tamiia sastoji se od dva proizvođača proizvoda kako bi modelarima omogućili pristup jednom ekskluzivnom kompletu.

Izvor: Hawker Hurricane Mk.I on Tamiya

Nastavi sa čitanjem →

Views : 2220

Grumman F7F Tigercat – WalkAround

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
Grumman F7F-3 Tigercat

Grumman F7F Tigercat

ZemljaSad
CatégorieVojni avioni
TipBorbeni avioni
Prvi let2 November 1943

Le Grumman F7F Tigercat était le premier chasseur lourd bimoteur embarqué américain. Bien que nettement supérieur au F4U Corsair qui était considéré alors comme le meilleur chasseur de la marine, en arrivant que fin 1944, ces avions ne participèrent pas aux combats de la seconde guerre mondiale. Le Tigercat, produit à 362 unités, a été décliné en cinq versions différentes : – le F7F-1 : chasseur de jour monoplace (35 unités) – le F7F-2N : chasseur de nuit biplace (65 unités) – le F7F-3 : chasse de jour/reconnaissance photo (189 unités) – le F7F-3N : chasse de nuit (60 unités) – le F7F-4N : chasseur embarqué (13 unités)

Izvor:Tigertcat na Vikipediji

Nastavi sa čitanjem →

Broj posetilaca : 5150

Japanska mornarica Sub I-400 – Tamiya 89776

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
Japanese Navy Sub I-400 - Tamiya 89776

Tamiya

Ref. 89776
TipComp
Skali1/350
Tema

Japanese Navy Sub I-400

Included clear hangar parts enable you to view the interior of the hangar after the model is assembled. Transparent parts for the Seiran aircraft allow you to leave the canopy unpainted for a more realistic appearance. Photo-etched parts for handrails and display stand nameplate are included. 4 metal type 95 torpedoes included. Guide stickers to aid with positioning photo-etched handrail posts are included. 48 1/350 scale crew figures included to liven up the model’s decks.

This is a 1/350 model of the Japanese Navy Submarine I-400 with transparent hangar parts. Created as part of a daring plan to attack major cities in the United States and the Panama Canal in the last stages of WWII, these three technologically advanced I-400 class large aircraft carrier submarines never had the chance to see action due to the surrender of Japan.

Izvor: Japanese Navy Sub I-400 on Tamiya

Nastavi sa čitanjem →

Poruke : 1589

Russian Heavy Tank JS-2 1944 – Tamiya 32571

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
Russian Heavy Tank JS-2 1944 - Tamiya 32571

Tamiya

Ref 32571
TipComp
Skali1/48
Tema

Russian Heavy Tank JS-2 1944

Turret and hull feature a realistic cast metal surface texture. The assembly-type tracks offer easy assembly and feature realistic sag effect. Includes 1 commander figure positioned in the cupola. Comes with 2 kinds of markings.

The Russian Heavy Tank JS-2 was built to counter the German Tiger I. The JS-2, which was put into production in December 1943 during the latter half of WWII, had a long powerful 122mm gun and superior armor. From August, 1944 the hatch on the front glacis was deleted, which greatly improved its frontal protection. The JS-2 was produced in the Chelyabinsk Kirov factory (ChKZ), and they proved to be effective as “breakthrough” tanks as well as combating German armor. The Tamiya 1/48 scale model kit faithfully captures the details of this iconic World War II machine.

Izvor: Steyr 1500A on Tamiya

Nastavi sa čitanjem →

Poruke : 2063

German Steyr 1500A Kommandeurwagen – Tamiya 25149

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
Nemački Steyr 1500A Kommandeurwagen - Tamiya 25149

Tamiya

Ref. 25149
TipComp
Skali1/35
Tema

Nemački Steir 1500A Kommandeurvagen HK osoblje set (v / 7 Figures)

You can choose to assemble the roof, trunk’s lid, and all four doors in either open or closed positions. The seats have a realistic textured finish. Kit includes a total of 7 figures to enable instant diorama creation straight from the box: 3 Tamiya figures (a standing officer, a seated driver, and a seated general officer) 4 ICM figures (a general officer, an adjutant, a female assistant, and a common soldier)

During WWII, the German army produced many different variants of the Steyr Type 1500A light vehicle. One of these variants was the Kommandeurwagen, which was used as a staff car to transport high ranking officers and commanders. Fitted with an 85hp engine, it had a maximum speed of 100km/h on paved roads. It was equipped with a front torsion bar and rear leaf spring suspension system and was appointed with leather seats. The Tamiya 1/35 scale plastic model kit faithfully brings all the details of the Steyr to life.

Izvor: Steyr 1500A on Tamiya

Nastavi sa čitanjem →

Views : 2785

Nemački Panzerkampfwagen 35(t) – Tamiya 25112

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
Nemački Panzerkampfwagen 35(t) - Tamiya 25112

Tamiya

Ref. 25112
TipComp
Skali1/35
Tema

Panzerkampfwagen 35(t)

This is a limited edition re-release of the 1/35 scale German Panzerkampfwagen 35t

Riveted construction and bogie-type suspension reproduced. Tracks feature one-piece straight sections for ease of assembly. Includes parts for MG37(t) machine guns, notek light, tools, and 12 early-type jerry cans. Commander figure may be assembled with a beret, side cap, or officer’s cap. 3 marking options included to depict tanks which saw action in Poland, France, and Russia. Tank parts are product of CMK.

Following Germany’s annexation of Czechoslovakia, the German army modified various Czech-made military hardware and pressed them into service. Among these was the LTvz.35 light tank built by Skoda, which was re-designated as the Pz.Kpfw.35(t). With an armament of one 37mm main gun and two 7.92mm machine guns and a 120hp liquid-cooled gasoline engine enabling a maximum speed of 34km/h, this light tank’s capabilities were on par with the German army’s Panzer III medium tanks. At the start of WWII, the 6th Panzer Division was equipped with about 200 of these tanks and they were used during the invasions of Poland and France, as well as the early stages of the invasion of Russia.

Izvor: Panzerkampfwagen 35(t) on Tamiya

Nastavi sa čitanjem →

Views : 2014

U.S. Aircraft Carrier Yorktown – Tamiya 31712

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
U.S. Aircraft Carrier Yorktown - Tamiya 31712

Tamiya

Ref 31712
TipComp
Skali1/700
Tema

U.S. Aircraft Carrier Yorktown

1/700 scale plastic assembly kit of the Yorktown (CV-5) as she appeared during the Battle of Midway. Hanger doors may be depicted in open or closed position. Elevator at the stern may be depicted in up or down position. Comes with parts to depict F4F Wildcats, Douglas SBD-3 Dauntlesses, and Douglas TBD-1 Devastators.

Čaj USS Yorktown was completed in September 1937 as the first ship of her namesake-class and the U.S. Navy’s sixth aircraft carrier. When the Pacific War broke out, she became the flagship of Task Force 17 under the command of Rear Admiral Frank J. Fletcher and conducted a number of operations around the Pacific. During the Battle of the Coral Sea in May 1942, she helped thwart the Japanese Navy’s advance on New Guinea despite suffering severe damage. Subsequently, at the Battle of Midway, the Yorktown and her sister ships USS Enterprise and USS Hornet defeated the Japanese Mobile Fleet, but the Yorktown herself suffered severe damage by torpedo and bomb hits from the aircraft of the Japanese carrier Hiryu. She was finally sunk by torpedoes from the Japanese submarine I-168. The Tamiya 1/700 scale model is a precise replica assembly kit of this iconic carrier during WWII.

Izvor: U.S. Aircraft Carrier Yorktown on Tamiya

Nastavi sa čitanjem →

Views : 1651

Japanese Heavy Cruiser Chikuma – Tamiya 78027

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
Japanese Heavy Cruiser Chikuma - Tamiya 78027

Tamiya

Ref 78027
TipComp
Skali1/350
Tema

Japanese Heavy Cruiser Chikuma

1/350 scale plastic assembly kit of the Chikuma before she was refitted with additional AA guns, radar, and air defense command center. Model may be assembled as a full hull model mounted on a display stand or a waterline model. The use of small screws enables secure attachment of the hull and deck. Highly detailed main gun turrets. Gun barrels articulate in 2 different angles. V-shaped ventilator ducts and funnels included. Mast components are made from ABS plastic for greater durability. Photo-etched parts such as aircraft trolleys, catapult rails, and mast braces included. Anchor chains and propeller shafts are made with metal parts. Floatplanes included and come with display stands. Kit includes a Reference Booklet which provides background information for the Chikuma as well as a full color Painting Guide.

Chikuma was the last heavy cruiser the Imperial Japanese Navy constructed during WWII and was completed in May 1939 as the second ship of the Tone-class. Her four twin 20.3cm guns were located at the bow to enable unhindered operation of up to 6 floatplanes at the stern. Her design also enabled a top speed of 35 knots and a long range. She was assigned to the Carrier Mobile Fleet with her sister ship Tone. During the Pearl Harbor Attack in December 1941, her floatplanes carried out pre-attack reconnaissance over the Pearl Harbor, which greatly contributed to the IJN’s success of the operation. She was also active during the Battle of Midway and the Solomon Islands campaign. During the Battle of the Leyte Gulf in October 1944, she was the flagship of Admiral Kurita’s fleet and contributed to the sinking of the USS Gambier Bay but she was in turn damaged by torpedoes and scuttled off the coast of Samar Island.

Izvor: Japanese Heavy Cruiser Chikuma on Tamiya

Nastavi sa čitanjem →

Poruke : 2697

Avro Lancaster B Mk.I – B Mk.III – Tamiya 61111

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
Avro Lancaster B Mk.I - B Mk.III - Tamiya 61111

Tamiya

Ref 61111
TipComp
Skali1/48
Tema

Avro Lancaster B Mk.III Special "Dambuster" / B Mk.I Special "Grend slem bombarder"

Komplet sadrži delove za prikaz Lankaster as either a Mk.I Grand Slam or a Mk.III Dambuster variant. Based on the latest research information, details such as early-type propellers and late-type front canopy have been faithfully depicted. Parts for two Merlin engines are included. Engine nacelles can be depicted in either open or closed state. The gun turrets are all movable. Pre-painted as well as unpainted canopy parts are included. Comes with 3 marking options and 5 crew figures.

Čaj Avro Lankaster bio je jedan od glavnih teških bombardera RAF-a tokom Drugog svetskog rata. Među mnogim varijantama, Mk.III "Dambuster" i Mk.I "Grand Slam Bomber" su najpoznatiji i najpoznatiji. "Dambuster" je modifikovan da napadne brane u Nemačkoj. Bio je opremljen specijalnim bombama koje bi preskočile vodu do zida brane i eksplodirale ispod površine vode kako bi nanijele strukturnu štetu. "Grand Slam bombarder" je dizajniran da nosi 10-tonsku Grand Slam zemljotres bombu i njegova vrata bombe i leđne mitraljeze su uklonjeni kako bi se smanjila težina kako bi se to učinilo. Ovi Lancaster je koristio Grand Slam na takvim važnim ciljevima kao što su podmornice baze i raketa proizvodnih lokacija. Model Tamiia verno snima sve detalje ovog istorijskog i poznatog aviona iz Drugog svetskog rata u skali 1/48

Izvor: Avro Lancaster B Mk.I – B Mk.III on Tamiya

Nastavi sa čitanjem →

Broj posetilaca : 1751

Ilyushin IL-2 Shturmovik – Tamiya 61113

Objavljeno dana Izmenjeno dana po | Ostavi odgovor
Ilyushin IL-2 Shturmovik - Tamiya 61113

Tamiya

Ref 61113
TipComp
Skali1/48
Tema

Ilyushin IL-2 Shturmovik

Model depicts a late variant of the Ilyushin IL-2 Shturmovik (two-seat cockpit and swept outer wings) 3 kinds of canopies included and each may be depicted in either open or closed position. Highly-detailed cockpit accurately depicts the fuel tank positioned between pilot and gunner. Radiator and oil cooler reproduced accurately. Includes 2 kinds of covers for 23mm cannons. Parts for 100kg and 250kg bombs included. 3 kinds of rocket launcher parts included, Comes with 3 decal marking options.

Čaj Ilyushin Il-2 was one of the most significant ground-attack aircraft of WWII. It incorporated a sturdy monocoque construction and excellent armor protection to make it perfect for ground attack operations. It was initially conceived as a two-seat design but due to weight issues it was re-designed as a lighter single-seat aircraft in 1940. As production began in 1941, the aircraft was designated as the Il-2. Heavy losses of the single-seat aircraft during combat forced the addition of a rear gunner position in 1943. Later variants featured improvements such as swept outer wings for better handling. The Il-2 contributed greatly to the eventual Russian victory over Nazi Germany. Joseph Stalin himself famously noted that the aircraft was as vital to the Russian Army as air and bread.

Izvor: Ilyushin IL-2 Shturmovik on Tamiya

Nastavi sa čitanjem →

Views: 1722