道格拉斯C-47

道格拉斯C-47天际列车

国家美国
类型军用运输机
首次飞行1941年12月23日
建立10174

道格拉斯C-47达科他州的照片库, 道格拉斯C-47 Skytrain or Dakota (RAF designation) is a military transport aircraft that was developed from the Douglas DC-3 airliner. It was used extensively by the Allies during World War II and remained in front line service with various military operators through the 1950s. The C-47 differed from the civilian DC-3 in numerous modifications that included being fitted with a cargo door and a strengthened floor. During World War II, the armed forces of many countries used the C-47 and modified DC-3s for the transport of troops, cargo, and wounded. The U.S. Naval designation was R4D. More than 10,000 aircraft were produced in Long Beach and Santa Monica, California and Oklahoma City, Oklahoma. The Oklahoma City plant produced 5,354 C-47s from March 1943 until August 1945.

源: 维基 百科

继续阅读

意见 : 6309

德国 Pz. sfl. 伊瓦 · 迪克 · 马克斯 - 特朗普特 07108

Trumpeter

裁判 07108
类型型号套件
规模1/72
主题

German Pz.Sfl.Iva Dicker Max

品牌模型 Trumpeter 套件: German Pz.Sfl.Iva Dicker Max – Trumpeter 07108.

Features : The kit consists of over 100 parts -detailed hull and turret

克虏伯在1938财政年度的报告中透露,开始设计一个105毫米K L/52塞尔布斯特法拉费特。这台机器被誉为"迪克最大"。它配备了105毫米K 18 L/52克虏伯。该枪装有带双偏转器的枪口制动器,这种武器可以在30度至2000米的垂直角度下穿透111毫米的屏蔽。这辆装甲车稍微装甲(10-50毫米),上部建筑是开放的。发动机是标准12缸(汽油)迈巴赫HL 120确保在路上的最高时速40公里/小时。在俄罗斯的"巴巴罗萨"行动的头几个月,他们被分配到Abt.521。其中一个在战斗中被摧毁,另一个在1941年被摧毁。这两个原型非常有效。然而,反驳了当时俄罗斯人在战斗中投入的所有型号。

源: 特朗普特

继续阅读

观点 : 1218

苏联 2S3 152mm 自螺旋桨榴弹炮 - 早期版本 - 特朗普特 05543

Trumpeter

裁判 05543
类型型号套件
规模1/35
主题

Soviet 2S3 152mm Self-Propeller Howitzer – Early Version

品牌模型 Trumpeter 套件: Soviet 2S3 152mm Self-Propeller Howitzer – Early Version – Trumpeter 05543.

Features : The kit consists of over 530 parts -the kit w/refined detail -multi-slide moulded turret, upper hull and lower hull -240 individual tracks links

Designated M1973 by the US Army, the Akatsiya is armed with a 152.4 mm howitzer based on the Soviet 152.4 mm D-20 howitzer and is sometimes confused with the M109 self-propelled artillery. The artillery system was developed at the design bureau No. 9 of Kalinin Machine-Building Plant in Sverdlovsk. The factory designation of the howitzer is D-22 and the GRAU designation, 2A33. The chassis was developed by Uraltransmash. Driver’s and engine-transmission compartments are located in a front part of a hull, fighting compartment with rotatory turret – in middle and rear parts of the hull. The armour is welded rolled steel. Howitzer is equipped with R-123 radio set, R-124 intercom, automatic NBC system with filtration unit and fire-fighting equipment. The V-59 12-cylinder four stroke water-cooled diesel engine connects with a mechanical twin gear transmission, a gear box is in one block with a planetary steering gear. SO-152 has self-entrenching equipment which allows to prepare a trench within 20-40 min. The crew consists of 4-6 men: a driver, a gunner, a loader, a commander, and two ammunition bearers, which are positioned to the rear of the vehicle feeding rounds through two hatches in the hull rear when in masked firing position.

Source: Trumpeter

继续阅读

观看次数 : 1923

俄罗斯BM-21格拉德多火箭发射器 - 特朗普特01013

Trumpeter

裁判 01013
类型型号套件
规模1/35
主题

Russian BM-21 Grad Multiple Rocket Launcher

品牌模型 Trumpeter 套件: Russian BM-21 Grad Multiple Rocket Launcher – Trumpeter 01013.

Features : Detailed multi-directional slide-molded cab. Full drive train assembly complete with engine transmission, differential housing and suspension units. The main tires are hollow rubber with very good tread pattern Wheel hubs are in great details with separate hub rings. The windshield and side windows are made of clear prts. Photo-etched parts included

The BM-21 Grad is a Russian truck-mounted 122 mm multiple rocket launcher, developed in the early 1960s. Several other countries have copied it or developed similar systems. The BM-21 122 mm multiple rocket launcher (MRL) system entered service with the Soviet Army in 1963 to replace the aging 140 mm BM-14 system. It consists of a Ural-375D 6X6 truck chassis fitted with a bank of 40 launch tubes arranged in a rectangular shape that can be turned away from the unprotected cab.In 1976, the BM-21 was mounted on the newer Ural-4320 six-by-six army truck.

Source: Trumpeter

继续阅读

观点 : 1331

美国马里兰州BB-46 1941 - 特朗普特 05769

Trumpeter

裁判 05769
类型型号套件
规模1/700
主题

USS Maryland BB-46 1941

品牌模型 Trumpeter 套件: USS Maryland BB-46 1941 – Trumpeter 05769.

Features : Lower hull & upper hull made from multi-directional slide moulds. – Either full hull version or waterline version can be selected. – Deck wood pattern finely rendered – Contains two OS2U plane – Contains display stand and engraved name plate – Photo-etched frets included

USS Maryland (BB-46), as the Colorado class battleship second ship.Build in 1917 at the Newport news shipyard, launched in 1920, Service in 1921. USS Maryland mainly on training, and participated in various fleet problem-solving exercises.In 1941, the Japanese Navy attacked Pearl Harbor, USS Maryland also attacked and damaged in the harbor.After the attack on the America Maryland returned to repair, and made for modernization.1942 USS Maryland returned to fight in the war, and has taken part in the Gilbert and Marshall Islands, the Mariana Islands and Palau in the war and the battle of Leyte gulf.After the battle of USS Maryland, was a kamikaze aircraft suicide attack, had to withdraw repair.After the battle of Okinawa and Maryland, and to assist the Allied forces after Japan’s surrender in the occupation of the local, and then return.USS Maryland retired 1947, and in 1959 except by selling dismantling.

Source: Trumpeter

继续阅读

视图 : 796

苏联NKL-16 Aerosan - 小号手02337

Trumpeter

裁判 02337
类型型号套件
规模1/35
主题

Soviet NKL-16 Aerosan

品牌模型 Trumpeter 套件: Soviet NKL-16 Aerosan – Trumpeter 02337.

Features : The kit consists of over 210 parts ,includes one piece of Photo Etched parts – Details finely represented by newly tooled parts

The NKL-16 was an aerosan introduced by the Soviet Union during the World War II, based on the earlier NKL-6 . It was made of plywood, powered by an M-11G aircraft engine. During WWII, improved NKL-16/41 and NKL-16/42 models were built, and production started at the ZiS and GAZ car factories, and at smaller industries such as the Stalingrad Bekietovskiy Wood Works. The NKL-16s were organized into transport battalions with NKL-26s.

Source: Trumpeter

继续阅读

视图 : 1241

我 323 吉甘特 - 相册照片

我 323 吉甘特

时期二战
裁判

我 323 吉甘特

描述专辑 100 照片我 323 吉甘特

The Messerschmitt Me 323 Gigant (“Giant”) was a German military transport aircraft of World War II. It was a powered variant of the Me 321 military glider and was the largest land-based transport aircraft of the war. A total of 213 are recorded as having been made, a few being converted from the Me 321. The Me 323 was the result of a 1940 German requirement for a large assault glider in preparation for Operation Sea Lion, the projected invasion of Great Britain. The DFS 230 light glider had already proven its worth in the Battle of Fort Eben-Emael in Belgium (the first ever assault by gliderborne troops), and would later be used successfully in the invasion of Crete in 1941. However, in order to mount an invasion across the English Channel, the Germans would need to be able to airlift vehicles and other heavy equipment as part of an initial assault wave. Although Operation Sea Lion was cancelled, the requirement for a heavy air transport capability still existed, with the focus now on the forthcoming Operation Barbarossa, the invasion of the Soviet Union. On 18 October 1940, Junkers and Messerschmitt were given just 14 days to submit a proposal for a large transport glider. The emphasis was still very much on the assault role: the ambitious requirement was to be able to carry either an 88 mm gun and its half-track tractor, or a Panzer IV medium tank. The Junkers Ju 322 Mammut reached prototype form but was eventually scrapped due to difficulties in procuring the necessary high-grade timber for its all-wood construction and, as was discovered during the Mammut’s only test flight, an unacceptably high degree of instability inherent in the design. The proposed Messerschmitt aircraft was originally designated Me 261w, then changed to Me 263 and eventually became the Me 321. Although the Me 321 saw considerable service in Russia as a transport, it was never used for its intended role as an assault glider.

源: 维基 百科

继续阅读

浏览数 : 6846

IS-4

IS-4

国家苏联
类型

重型坦克

描述

专辑 58 照片走动的«IS-4»

Gallery Photo of a IS-4, The development of the vehicle was started in April 1944, with several prototypes manufactured by the end of World War II. The IS-4 was mass-produced from 1947 through 1949, with a total of 219 vehicles built. The IS-4 is a very versatile tank, with fair speed, a good gun, and thick sloped armor. When armed with the 122mm M62-T2 gun, it becomes a fearsome opponent, capable of belting out generous amounts of damage. It trades frontal armor from its predecessor, the ST-I, in exchange for better side armor and higher mobility. While it still is not as nimble as its counterpart, the IS-7, it sports better penetration and rate of fire. While its frontal armor is thinner than other tier X tanks, it compensates by having a great slope on the frontal armor plating, meaning that you will bounce enemy shots effectively. The IS-4 marks the end of one of the Soviet heavy tank lines.

源: 坦克世界

继续阅读

意见:3247

潘泽法雷·格潘泽特·兰德瓦施莱珀原型Nr.II - DML 7490

Dragon Model

裁判 7490
类型1/72 二战军事
规模1/72
主题

潘泽法赫雷 · 格潘泽特 · 兰德瓦瑟施莱珀原型 Nr. ii

品牌模型 龙模型 套件: 潘泽法雷 ·格潘泽特 · 兰德瓦施莱珀原型 Nr. ii – Dml 7490

Panzerfahre Gepanzerte Landwasserschlepper is authentically produced Chain links of front and rear hull Rivets on upper hull are detailed and realistic Spotlights exhibit extreme detail Commander’s compartment intricately produced Air intake accurately presented Detailed assembly w/3D-designed engine exhaust mufflers Well-detailed cable drum Crane is intricately presented Idler wheels w/correctly detailed parts Sprocket wheels w/breathtaking detail and multiple delicate parts Road wheels and suspension w/accurate details One-piece DS tracks reproduced

源:

继续阅读

意见 : 1090

张贴在 .