M9A1 | |
|---|---|
| Kraju | Stany Zjednoczone Ameryki |
| Typu | Halftrack |
| Temat | Album 47 zdjęcia spacer po M9A1 |
Galeria zdjęć M9A1 HalfTrack, M9A1 wynikał z faktu, że White i Autocar nie mogły nadążyć za popytem na samochody półgąsienicowe i były analogiczne do półgąsienic M2. M9A1 różniły się jednak pod kilkoma względami od M2A1. M9A1 nie miały bocznych przedziałów amunicyjnych, miały tylne drzwi, błotniki w M9A1 były płaskie w przekroju, a w przeciwieństwie do M2A1 nadwozie M9A1 było tej samej długości co M5, jego odpowiednik na transporterze. M9A1 nigdy nie miał również dużych reflektorów zamontowanych na błotnikach. International Harvester używał walcowanych jednorodnych stalowych pancerzy w swoich pojazdach, co pozwalało na spawanie płyt, nadając półgąsienicom IHC gładszy wygląd niż skręcane półgąsienice.
Źródła: Afvdb
Zobacz też:
Tthe M9A1 Half-Track Car was a variant of the M5 Half-Track produced by International Harvester (IHC) primarily for Lend-Lease to Allied nations during World War II, complementing the M2 and M3 Half-Tracks built by other manufacturers for US Army service. It served mainly as an armored personnel carrier and scout car.
Key Specifications and Features (M9A1)
| Characteristic | Detail |
|---|---|
| Roli | Armored Personnel Carrier (APC) / Scout Car |
| Producent | International Harvester (IHC) |
| Crew / Capacity | 3 Crew + 10 Troops |
| Weight (Combat) | Approx. 9.6 tonnes (21,200 lbs) |
| Engine / Speed | IHC RED-450-B 6-cyl gasoline engine (141 hp) / Max. 42 mph (68 km/h) |
| Zbroja | Rolled Homogeneous Steel (approx. 8–16 mm) |
| Uzbrojenie główne | 1 × .50 cal (12.7 mm) M2HB machine gun on an M49 Ring Mount |
| Uzbrojenie dodatkowe | 1 or 2 × .30 cal (7.62 mm) M1919A4 machine guns on pintle mounts |
Design & Operational Context
The M9A1 was developed as an export version analogous to the US Army’s M2A1 Half-Track Car, but was based on the longer M5 chassis (similar length to the M3 APC). The key difference between the M9A1 and its M2/M2A1 counterparts were:
- It featured rear access doors for the troop compartment, unlike the standard M2.
- It used a different type of armor (Rolled Homogeneous Steel) which, though thicker, offered slightly less ballistic protection than the face-hardened armor on the M2/M3. This IHC armor gave it distinguishing rounded rear corners.
- It was fitted with the **M49 machine gun ring mount** over the co-driver’s seat, allowing a .50 cal machine gun 360-degree traverse, which was the key update over the base M9 model.
The M9A1 was widely supplied to Allies, particularly the French and British forces, who valued the vehicle for its role in transporting infantry squads, providing fire support, and acting as a motorized artillery prime mover during the Western Front and beyond. It was a rugged and reliable, though lightly armored, part of the Allied armored transport fleet.
Liczba wyświetleń : 3240
