Панцер III | |
|---|---|
| Страна | Германия |
| Тип | Бронирани превозни средства от Втората световна война |
| Под -Тип | Танк |
| Тема | Албум на 69 снимки разходка около резервоар Панцер III |
Photo gallery of a Panzer III, The Панцер III was the common name of a medium tank that was developed in the 1930s by Germany and was used extensively in World War II.
Views : 7539
Центурион Mk5 | |
|---|---|
| Страна | Великобритания |
| Роля | Type Main battle tank |
| В експлоатация | 1946–до момента |
| Построен | 4423 |
1. Centurion е основният британски основен боен танк в периода след Втората световна война. Представен през 1945 г., той се смята за един от най-успешните следвоенни танкови дизайни, оставайки в производство до 1960-те години на миналия век и виждайки битки на фронтовата линия през 1980-те години. Шасито е адаптирано и за няколко други роли и те остават в експлоатация и до днес.
Източник: Centurion on Wikipedia
Views : 6709
Драконови модели | |
|---|---|
| Ref | 75042 |
| Тема | 1/6 Military |
| Мащаб | 1/6 |
| предмет | SAS Raider 4×4 Truck, Northwest European Theatre 1944 |
Модел на марката Драконови модели комплекта: SAS Raider 4×4 Truck – Northwest European Theatre 1944 – DML 75042/span>
-Well-detailed seats w/realistic cloth pattern -Cutaway slats on radiator grille -303in Bren Light Machine Gun -etailed dashboard is finely represented -Detachable petrol cans in rack -Realistic spare wheel included -Detailed Vickers K machine guns mounted w/well-depicted armored shields -Bonus ammo drums included
The new Dragon 1/6 scale model kit shows a 1/4-Ton 4×4 Truck modified by the SAS for ETO missions. It’s heavily loaded with extra fuel to allow reconnaissance missions deep behind frontlines. The SAS vehicle is heavily armed with fast-firing Vickers K machine guns, with twin-mount machine guns ready for use against ground or aerial targets. A Bren Gun mounted near the driver’s seat is also included. This exciting kit is accurate in every detail, and the SAS vehicle is ready to wreak havoc across enemy-occupied Europe!
Източник: SAS Raider 4×4 Truck on Dragon Models
Views : 2130
Т-54 | |
|---|---|
| Страна | 1000000000 |
| Тип | Коли |
| Тема | Албум на 117 снимки разходка около резервоар Т-54 |
Photo gallery of a tank T-54, The Т-54 И Т-55 tanks were a series of main battle tanks designed in the Soviet Union. The first T-54 prototype appeared in March 1945, just before the end of the Second World War. The T-54 entered full production in 1947 and became the main tank for armored units of the Soviet Army, armies of the Warsaw Pact countries, and others. T-54s and T-55s were involved in many of the world’s armed conflicts during the late 20th and early 21st century.
Views : 4230
Драконови модели | |
|---|---|
| Ref | 7129 |
| Тема | Warships |
| Мащаб | 1/700 |
| предмет | U.S.S. Fort Worth LCS-3 |
Комплект от марката Драконови модели комплекта: U.S.S. Fort Worth LCS-3 – DML 7129
The US Navy (USN) created a revolutionary concept when it listed the requirements for its new Littoral Combat Ships (LCS), naval craft designed to operate in coastal waters against both underwater and surface threats. Two different designs were created by competing American consortiums, with USS Freedom (LCS-1) being the lead ship designed by Lockheed Martin. The second of class is USS Fort Worth (LCS-3), is scheduled for commissioning in September 2012. She is 118.6m long and displaces 3,200 tons. Differences to the lead ship include a lengthened hull to improve speed and reduce fuel consumption, plus enhanced stability measures. State-of-the-art systems mean a crew of less than 50 sailors is required to operate USS Fort Worth.
Dragon has created a fine 1/700 scale plastic model of this ship, accurately capturing the angular lines of the sleek Freedom-class vessel. It’s based on the Cyber-Hobby kit of LCS-1, a model that was widely acclaimed. However, this new item required a completely new slide-molded hull and deck because of Fort Worth’s increased length. Modelers will find that the well-engineered parts precisely fit together, and as is expected, they can choose to put together either a waterline or full-hull version. With Cyber-Hobby having already produced identically scaled models of LCS-1, LCS-2 and LCS-4, modelers will be able to assemble a small armada consisting of the first four LCS ships ever built!
Източник: U.S.S. Fort Worth on Dragon Models
Начини на показване : 647
Драконов модел | |
|---|---|
| Ref | 4643 |
| Тема | Warbirds |
| Мащаб | 1/144 |
| предмет | Grumman X-29 |
Модел на марката Драконов модел комплекта: Grumman X-29 – DML 4643
Функции: -Newly produced X-29 w/forward-swept wings -Accurately defined transparent canopy can be assembled open/closed -Detailed landing gear can be assembled in either flying or taxiing modes -Boarding stairs included -One-piece fuselage newly produced -Fuselage possesses metal-skinned appearance -Realistic rudders reproduced -Fully detailed close-coupled canard -Pilot’s seat authentically detailed -Detailed engine exhaust nozzle
As part of the USA’s experimental flight program, the X-29 first took to the air from Edwards Air Force Base on 14 December 1984. A total of two aircraft, based on Northrop F-5A Freedom Fighter airframes, were produced and they flew in various tests up till 1991. The Grumman X-29’s key characteristics were forward-swept wings (at more than 33° angle), canard control surfaces and composite materials. The design was inherently unstable to increase its agility, so it utilized computerized fly-by-wire controls that could make 40 corrections per second while flying at a maximum speed of Mach 1.8. The carbon-fiber composite materials were necessary to manage the twisting that results from forward-swept wings. Such aeroelastic divergent twisting results from aerodynamic forces that rotate the wings’ leading edges upwards, and which could easily result in structural failure. Interestingly, this was only the world’s second jet-powered aircraft to have forward-swept wings, the first being the Junkers Ju 287 of 1944 vintage!
Източник: Grumman X-29 on Dragon Models
Гледания : 1679
Хоби Шеф | |
|---|---|
| предмет | Съветски флот Виктор III клас(Проект 671RTMK) SSN |
| Мащаб | 1/350 |
| Ref | 83529 |
Модел на марката ХобиБос комплекта: Soviet Navy Victor III Class(Project 671RTMK) SSN – HOBBY BOSS 83529
Функции : The kit consists of over 50 parts , includes 19 Photo etched parts – Photo Etched parts for nameplate and propeller – contains display stand
Victor III class – the Soviet model 671RTM “Щука (Esox lucius) is a 2.5-generation nuclear submarines of the Soviet Navy.The whole boat with anechoic tiles cover the whole boat, floating raft shock absorption and other technology, quiet performance to the level of confrontation over the U.S. Los Angeles class nuclear submarine。 The boat’s water displacement of 4900 tons, submerged displacement of 6280 tons, the maximum length of 107.1 mThe average, maximum width of 10.6 meters, 7.5 meters draft. Nuclear power plant, the BM-4A type. Maximum water speed of 10 underwater to a maximum speed of 30.
Източник: Съветски флот Виктор III на хоби шеф
Views : 1515
Хоби Шеф | |
|---|---|
| Тема | PLA ZBL-09 Snow Leopard IFV |
| Мащаб | 1/35 |
| Ref | 82486 |
| Код | ZBL-09 |
Модел на марката ХобиБос комплекта: PLA ZBL-09 Snow Leopard IFV – HOBBY BOSS 82486
Функции : The kit consists of over 260 parts – Multi-directional slide moulded lower hull,upper hull and turret – The crew entry door can be fixed in the open or closed position. – Rubber tires have very good details – Photo-etched parts included
PLA Army in later 1990s raised the exact performance specifications of its new generation utility chassis of IFV and Armed Vehicle. In 1999, the plans of Chongqing Heavy Vehicle Group and NORINCO were selectd by Military Industrial governing department. After that, these prototype vehicles were combined with different gun-turrets for firing test and driving evaluation. At last, Northern Heavy Machinery won the project and in 2005 the manufacturer’ prototype vehicles were involved in later tests. In 2006, the sample utility chassis for Infantry Combat and Mobile Artillery vehicle were produced. After 24 months’ extreme condition adaptability testing, the new 8×8 wheeled Infantry Combat vehicle family was finalized the design and named as ZBL-09 “Snow Leopard”.
Източник: Snow Leopard IFV on Hobby Boss
Гледания : 1067
Хоби Шеф | |
|---|---|
| предмет | |
| Мащаб | 1/48 |
| Ref | 85803 |
| Код | Huey Hobby Boss |
Модел на марката ХобиБос комплекта: UH-1C Huey Helicopter – HOBBY BOSS 85803
Функции : The kit consists of over 30 parts , includes 5 clear parts for canopy – fuselage with finely engraved panel lines
1. Бел UH-1 Ирокоа, commonly known as the “Huey”, is a multipurpose military helicopter, was developed from 1955 US Army trials with the Bell Model 204. The initial designation of HU-1 (helicopter utility) led to its nickname, Huey. It was first used by the military in 1959 and went into tri-service production in 1962 as the UH-1. The last were produced in 1976 with more than 16,000 made in total, of which about 7,000 saw use during the Vietnam War and famous for its use in the Vietnam War.
Източник: UH-1C Huey Helicopter on Hobby Boss
преглеждания : 1540
Хоби Шеф | |
|---|---|
| Тема | Ranger Превозни средства за специални операции RSOV w / MG |
| Мащаб | 1/35 |
| Ref | 82450 |
| Код | Превозно средство със специална експлоатация |
Модел на марката ХобиБос комплекта: Ranger Special Operations Vehicle RSOV w/MG – HOBBY BOSS 82450
Функции : The kit consists of over 190 parts ,includes 10 clear parts. -the kit w/refined detail -Detailed engine w/accurate design -Rubber tires with very good detail
Ranger Special Operations Vehicle или RSOV е лек военен автомобил на 75-ти рейнджърски полк на американската армия, базиран на Land Rover Defender. В "Алфа ротата" на всеки от трите рейнджърски батальона има по 12 РСОВ. Превозните средства са разположени в три взвода, като всеки взвод обхваща две секции от два RSOV и два мотоциклета Kawasaki KLR250.
Източник: RSOV на хоби шеф
преглеждания: 1681