Panzer III | |
|---|---|
| País | Alemanha |
| Tipo | Veículos blindados da Segunda Guerra Mundial |
| Sub-Tipo | tanque |
| Tópico | Álbum de 69 fotos andar em torno de um tanque Panzer III |
Galeria de fotos de um Panzer III, O Panzer III era o nome comum de um tanque médio que foi desenvolvido na década de 1930 pela Alemanha e foi usado extensivamente na Segunda Guerra Mundial.
Views : 7534
Centurião Mk5 | |
|---|---|
| País | Reino unido |
| Papel | Type Main battle tank |
| Em serviço | 1946–presente |
| Construído | 4423 |
O Centurião foi o principal tanque de batalha britânico do período pós-Segunda Guerra Mundial. Introduzido em 1945, é amplamente considerado um dos projetos de tanques mais bem-sucedidos do pós-guerra, permanecendo em produção na década de 1960 e vendo o combate nas linhas de frente na década de 1980. O chassi também foi adaptado para várias outras funções, e estas permaneceram em serviço até hoje.
Fonte: Centurião na Wikipédia
Views : 6705
Modelos de Dragão | |
|---|---|
| Ref | 75042 |
| Tópico | 1/6 Militar |
| Escala | 1/6 |
| Assunto | SAS Raider 4×4 Truck, Northwest European Theatre 1944 |
Um modelo da marca Modelos de Dragão o kit : SAS Raider 4×4 Truck – Northwest European Theatre 1944 – DML 75042/span>
-Well-detailed seats w/realistic cloth pattern -Cutaway slats on radiator grille -303in Bren Light Machine Gun -etailed dashboard is finely represented -Detachable petrol cans in rack -Realistic spare wheel included -Detailed Vickers K machine guns mounted w/well-depicted armored shields -Bonus ammo drums included
The new Dragon 1/6 scale model kit shows a 1/4-Ton 4×4 Truck modified by the SAS for ETO missions. It’s heavily loaded with extra fuel to allow reconnaissance missions deep behind frontlines. The SAS vehicle is heavily armed with fast-firing Vickers K machine guns, with twin-mount machine guns ready for use against ground or aerial targets. A Bren Gun mounted near the driver’s seat is also included. This exciting kit is accurate in every detail, and the SAS vehicle is ready to wreak havoc across enemy-occupied Europe!
Views : 2106
T-54 | |
|---|---|
| País | URSS |
| Tipo | Char |
| Tópico | Álbum de 117 fotos andar em torno de um tanque T-54 |
Galeria de fotos de um tanque T-54, O T-54 e T-55 tanques foram uma série de tanques de batalha principais projetados na União Soviética. O primeiro protótipo do T-54 apareceu em março de 1945, pouco antes do final da Segunda Guerra Mundial. O T-54 entrou em plena produção em 1947 e tornou-se o principal tanque para unidades blindadas do Exército Soviético, exércitos dos países do Pacto de Varsóvia e outros. T-54 e T-55 estiveram envolvidos em muitos dos conflitos armados do mundo durante o final do século 20 e início do século 21.
Views : 4200
Modelos de Dragão | |
|---|---|
| Ref | 7129 |
| Tópico | Warships |
| Escala | 1/700 |
| Assunto | U.S.S. Fort Worth LCS-3 |
Um kit da marca Modelos de Dragão o kit : U.S.S. Fort Worth LCS-3 – DML 7129
The US Navy (USN) created a revolutionary concept when it listed the requirements for its new Littoral Combat Ships (LCS), naval craft designed to operate in coastal waters against both underwater and surface threats. Two different designs were created by competing American consortiums, with USS Freedom (LCS-1) being the lead ship designed by Lockheed Martin. The second of class is USS Fort Worth (LCS-3), is scheduled for commissioning in September 2012. She is 118.6m long and displaces 3,200 tons. Differences to the lead ship include a lengthened hull to improve speed and reduce fuel consumption, plus enhanced stability measures. State-of-the-art systems mean a crew of less than 50 sailors is required to operate USS Fort Worth.
Dragon has created a fine 1/700 scale plastic model of this ship, accurately capturing the angular lines of the sleek Freedom-class vessel. It’s based on the Cyber-Hobby kit of LCS-1, a model that was widely acclaimed. However, this new item required a completely new slide-molded hull and deck because of Fort Worth’s increased length. Modelers will find that the well-engineered parts precisely fit together, and as is expected, they can choose to put together either a waterline or full-hull version. With Cyber-Hobby having already produced identically scaled models of LCS-1, LCS-2 and LCS-4, modelers will be able to assemble a small armada consisting of the first four LCS ships ever built!
Visualizações : 623
Modelo Dragão | |
|---|---|
| Ref | 4643 |
| Tópico | Warbirds |
| Escala | 1/144 |
| Assunto | Grumman X-29 |
Um modelo da marca Modelo Dragão o kit : Grumman X-29 – DML 4643
Características: -Newly produced X-29 w/forward-swept wings -Accurately defined transparent canopy can be assembled open/closed -Detailed landing gear can be assembled in either flying or taxiing modes -Boarding stairs included -One-piece fuselage newly produced -Fuselage possesses metal-skinned appearance -Realistic rudders reproduced -Fully detailed close-coupled canard -Pilot’s seat authentically detailed -Detailed engine exhaust nozzle
As part of the USA’s experimental flight program, the X-29 first took to the air from Edwards Air Force Base on 14 December 1984. A total of two aircraft, based on Northrop F-5A Freedom Fighter airframes, were produced and they flew in various tests up till 1991. The Grumman X-29’s key characteristics were forward-swept wings (at more than 33° angle), canard control surfaces and composite materials. The design was inherently unstable to increase its agility, so it utilized computerized fly-by-wire controls that could make 40 corrections per second while flying at a maximum speed of Mach 1.8. The carbon-fiber composite materials were necessary to manage the twisting that results from forward-swept wings. Such aeroelastic divergent twisting results from aerodynamic forces that rotate the wings’ leading edges upwards, and which could easily result in structural failure. Interestingly, this was only the world’s second jet-powered aircraft to have forward-swept wings, the first being the Junkers Ju 287 of 1944 vintage!
Views : 1653
Chefe hobby | |
|---|---|
| Assunto | Marinha Soviética Classe Victor III (Projeto 671RTMK) SSN |
| Escala | 1/350 |
| Ref | 83529 |
Um modelo da marca HobbyBoss o kit : Soviet Navy Victor III Class(Project 671RTMK) SSN – HOBBY BOSS 83529
Características : The kit consists of over 50 parts , includes 19 Photo etched parts – Photo Etched parts for nameplate and propeller – contains display stand
Victor III class – the Soviet model 671RTM “Щука (Esox lucius) is a 2.5-generation nuclear submarines of the Soviet Navy.The whole boat with anechoic tiles cover the whole boat, floating raft shock absorption and other technology, quiet performance to the level of confrontation over the U.S. Los Angeles class nuclear submarine。 The boat’s water displacement of 4900 tons, submerged displacement of 6280 tons, the maximum length of 107.1 mThe average, maximum width of 10.6 meters, 7.5 meters draft. Nuclear power plant, the BM-4A type. Maximum water speed of 10 underwater to a maximum speed of 30.
Visualizações : 1490
Chefe hobby | |
|---|---|
| Tópico | PLA ZBL-09 Leopardo das Neves IFV |
| Escala | 1/35 |
| Ref | 82486 |
| Código | ZBL-09 |
Um modelo da marca HobbyBoss o kit : PLA ZBL-09 Snow Leopard IFV – HOBBY BOSS 82486
Características : The kit consists of over 260 parts – Multi-directional slide moulded lower hull,upper hull and turret – The crew entry door can be fixed in the open or closed position. – Rubber tires have very good details – Photo-etched parts included
PLA Army in later 1990s raised the exact performance specifications of its new generation utility chassis of IFV and Armed Vehicle. In 1999, the plans of Chongqing Heavy Vehicle Group and NORINCO were selectd by Military Industrial governing department. After that, these prototype vehicles were combined with different gun-turrets for firing test and driving evaluation. At last, Northern Heavy Machinery won the project and in 2005 the manufacturer’ prototype vehicles were involved in later tests. In 2006, the sample utility chassis for Infantry Combat and Mobile Artillery vehicle were produced. After 24 months’ extreme condition adaptability testing, the new 8×8 wheeled Infantry Combat vehicle family was finalized the design and named as ZBL-09 “Snow Leopard”.
Visualizações : 1042
Chefe hobby | |
|---|---|
| Assunto | |
| Escala | 1/48 |
| Ref | 85803 |
| Código | Huey Hobby Chefe |
Um modelo da marca HobbyBoss o kit : UH-1C Huey Helicopter – HOBBY BOSS 85803
Características : The kit consists of over 30 parts , includes 5 clear parts for canopy – fuselage with finely engraved panel lines
O Sino UH-1 Iroquois, comumente conhecido como o "Huey", é um helicóptero militar multiuso, foi desenvolvido a partir de 1955 testes do Exército dos EUA com o Bell Model 204. A designação inicial de HU-1 (utilitário de helicóptero) levou ao seu apelido, Huey. Foi usado pela primeira vez pelos militares em 1959 e entrou em produção de três serviços em 1962 como UH-1. Os últimos foram produzidos em 1976 com mais de 16.000 feitos no total, dos quais cerca de 7.000 viram uso durante a Guerra do Vietnã e famosos por seu uso na Guerra do Vietnã.
Visualizações : 1516
Chefe hobby | |
|---|---|
| Tópico | Veículo de Operações Especiais Ranger RSOV com MG |
| Escala | 1/35 |
| Ref | 82450 |
| Código | Veículo de operação especial |
Um modelo da marca HobbyBoss o kit : Ranger Special Operations Vehicle RSOV w/MG – HOBBY BOSS 82450
Características : The kit consists of over 190 parts ,includes 10 clear parts. -the kit w/refined detail -Detailed engine w/accurate design -Rubber tires with very good detail
O Veículo de Operações Especiais Ranger ou RSOV é um veículo militar leve do 75º Regimento de Rangers do Exército dos Estados Unidos, baseado no Land Rover Defender. Existem 12 RSOVs na "Companhia Alfa" de cada um dos três batalhões de Rangers. Os veículos são colocados em campo em três pelotões, cada pelotão abrangendo duas seções de dois RSOVs e duas motocicletas Kawasaki KLR250.
Fonte: RSOV em Hobby Boss
Visualizações: 1681