Messerschmitt Bf 109F-4/Trop - Trubač 02293

Trumpeter

Ref. 02293
TipKomplet modela
Skali1/32
Tema

Messerschmitt Bf 109F-4/Trop

Model brenda Trumpeter komplet: Messerschmitt Bf 109F-4/Trop – Trumpeter 02293.

Features : The kit consists of over 240 parts Fuselage -Left and right fuselage moulded w/ authentic details Engine -Finely detailed engine. Interior -Finely detailed engine accessory compartment, -Finely detailed cockpit Wings – Optional position flaps – Rubber tires. PE -Photo-etched parts to upgrade details

The second major redesign of Bf109 is the F series. The “Friedrich” saw a complete redesign of the wings, the cooling system and fuselage aerodynamics, and was powered by the 1,175 PS DB 601N (F-1, F-2) or the 1,350 PS DB 601E (F-3, F-4). Considered by many as the high watermark of the Bf 109 development, the F series abandoned the wing cannon and concentrated all armament in the forward fuselage: a pair of machine guns above and a single 15 or 20mm cannon behind the engine, the latter firing between the cylinder banks and through the propeller hub and spinner. This configuration was used by all subsequent variants. A handful of Bf 109Fs were used operationally late in the Battle of Britain in 1940, but only become widespread in service in the first half of 1941, replacing the Bf109E.

Izvor: Trubaи

Nastavi sa čitanjem

Views : 2415

Sturmgeschütz

Sturmgeschütz

Tema

Album od 156 fotografija Sturmgeschütza

menstruacijaDrugi svetski rat
VojskuNemački Vermaht

Sturmgeschütz (or StuG) is an “assault gun” used by the German Wehrmacht during the Second World War. The vehicle was built on the chassis of the proven Panzer III. Initially intended as a mobile, armoured light gun for providing close fire support to infantry, panzer, and panzergrenadier units, the StuG was continually modified throughout its existence. It was often used as a mobile artillery platform to destroy bunkers, pillboxes and other entrenched positions. After the invasion of Soviet Russia in 1941, the StuG III was also converted to use as a tank destroyer because its main armament was the only weapon with sufficient power to take on the Soviet T-34 or KV-1 tanks. It would go on to become Nazi Germany’s most produced armoured fighting vehicle during World War II. The StuG was used primarily within the Sturmartillerie, a branch of the artillery in the Wehrmacht.

Izvor:

Nastavi sa čitanjem

Views : 5744

Medal "For the Defence of Leningrad"

Sovjetski Savez

TipMedalja za kampanju
PodobnostGrađani Sovjetskog Saveza
Nagrađeni zaUčešće u odbrani Lenjingrada
Uspostavljena22. decembar 1942. godine
Ukupno nagrađeno1,470,000

Medalja "Za odbranu Lenjingrada" bila je medalja kampanje Sovjetskog Saveza iz 2. svetskog rata osnovana 22. decembra 1942. godine dekretom Prezidijuma Vrhovnog sovjeta SSSR-a da prizna hrabrost i naporan rad sovjetskih civilnih i vojnih branilaca Lenjingrada tokom 872 dana opsade grada od strane nemačkih oružanih snaga između 8. septembra, 1941. i 27. januara 1944.

Izvor: Vikipedija

Nastavi sa čitanjem

Views : 1338

Imperial Japanese Army Type 95 Light Tank "Ha-Go" Early Production - DML 6767

Dragon Model

Ref. 6767
Tip1/35 Vojska
Skali1/35
Tema

Imperial Japanese Army Type 95 Light Tank “Ha-Go” Early Production

Model brenda Model zmaja komplet : Imperial Japanese Army Type 95 Light Tank "Ha-Go" Early Production – DML 6767

Dragon has introduced a great many exciting new kits in 2012, and there is one more 1/35 scale AFV gem to come this year. The new item is a Type 95 “Ha-Go” light tank of the Imperial Japanese Army (IJA). The Type 95 tank was used in combat against China and Russia, as well as fully participating in operations in WWII. Weighing just 7.4 tonnes, it was designed primarily as an infantry support weapon. Indeed, it was the most common light tank used by the IJA in the Pacific, with about 2,300 units manufactured. It had a crew of three, and the main armament was a Type 94 37mm gun. Its maximum speed was 45km/h.

The kit depicts an Early-Production variant and it’s based on actual measurements from real tanks. Although it’s a small vehicle, Dragon’s 1/35 scale kit is brimming with detail, something facilitated by the widespread use of slide molds. In fact, every single sprue in the kit employs slide molds, which is an astounding achievement! For example, the turret is of single-piece construction, with the multi-directional slide mold allowing details such as rivets to be rendered. The commander’s cupola is a similar story. The one piece lower hull has the correct armor panels and bolts on it. The upper hull is also one piece, and the gun barrel has a hollow end. The road wheels, idlers, sprockets and return rollers are slide-molded too. The DS slide-molded track links are accurately replicated in miniature so as to incorporate side details. This is an extremely exciting subject from Dragon, and because the Ha-Go was used in such diverse locations, modelers can produce any scenario such as jungle-clad terrain or a Pacific island!

Izvor: Modeli zmajeva

Nastavi sa čitanjem

Broj posetilaca : 1366

Pz.Kpfw.III (5cm) Ausf.G, Sd.Kfz.141, Rana proizvodnja - DML 6639

Dragon Model

Ref. 6639
Tip1/35 Vojska
Skali1/35
Tema

Pz.Kpfw.III (5cm) Ausf.G, Sd.Kfz.141, Early Production

Model brenda Model zmaja komplet : Pz.Kpfw.III (5cm) Ausf.G, Sd.Kfz.141, Rana proizvodnja – DML 6639

Istorija: Pancir III bio je zajednički naziv srednjeg tenka koji je razvijen u 1930-ih od strane Nemačke i intenzivno se koristio u Drugom svetskom ratu. Zvanična nemačka oznaka bila je Panzerkampfvagen III Sd Kfz. 141 (skraćeno PzKpfv III) što se prevodi kao "oklopno borbeno vozilo". Namenjen je da se bori protiv drugih oklopnih borbenih vozila i služi zajedno sa pešadijom podržava Panzer IV. Međutim, kako su se Nemci suočili sa silnim T-34, bili su potrebni jači protivtenkovski topovi. Pošto je Panzer IV imao veći prsten kupole, uloga je obrnuta. Panzer IV je montirao dugačak pištolj od 7,5 cm KvK 40 i učestvovao u borbama tenk-tenk. Panzer III je zastareo u ovoj ulozi i za većinu svrhe je zamenjen Panzer IV. Od 1942. godine, poslednja verzija Panzer III montirala je 7,5 cm KvK 37 L/24, pogodniju za podršku pešadije. Proizvodnja Panzer III završila je 1943. godine. Međutim, sposobna šasija Panzer III je obezbedila trupove za Sturmgeschütz III do kraja rata.

Izvor: Vikipedija i Modeli zmajeva

Nastavi sa čitanjem

Views : 1378

Antonov An-2V Colt - HOBI BOSS 81706

Šef hobija

Tema

Antonov AN-2W Colt

Skali1/48
Ref.81706

Model brenda HobbyBoss komplet : Antonov AN-2W Colt – HOBBY BOSS 81706

Funkcije : the kit consists of over 230+ parts -Detailed fuselage&wing w/accurate design -Detailed cockpit

The An-2 Colt has been used as a paratroop transport, glider tug, navigation trainer, utility transport and light bomber. The An-2 prototype was first flown on August 31, 1947, and the aircraft is still in production, although the Antonov Bureau has not produced any since 1960. The An-2s designer, Oleg Antonov, had been an aircraft designer during the Second World War. Originally designed for the Ministry of Agriculture and Forestry in the former Soviet Union, the aircraft was soon adopted by the Soviet Air Force and built for its client states. It is ideally suited to less developed countries because it requires little maintenance and is easy to fly.

Izvor: Šef hobija

Nastavi sa čitanjem

Views : 963

Pz.Kpfw.VI Tigar I Ausf.E srednje proizvodnje - ITALERI 6507

Italeri

Ref. 6507
TipKomplet modela
Skali1/35
Tema

Pz.Kpfw.VI Tiger I Ausf.E mid production

Model brenda ITALERI komplet Pz.Kpfw.VI Tiger I Ausf.E mid production – ITALERI 6507.

Čaj Tigar I tank, which has been produced in the second half of 1943, was based on the hull of the firstoperational version used in North Africa and Russia. At the beginning this tank had wheels with rubber rim,which will be replaced in the following productions starting from February 1944, but it was equipped withthe new turret with increased protection and better cupola for the commander. Besides some of thesevehicles maintained the characteristic system of dust filters Feifel, and the smoke grenade launchers. On thetanks produced since August 1943 was also applied a magnetic mine paste that will become standard on alltanks of the German Army.

Izvor: Italeri

Nastavi sa čitanjem

Broj posetilaca : 1721

Sd. Kfz. 251/16 Flammpanzerwagen - ITALERI 7067

Italeri

Ref. 7067
TipKomplet modela
Skali1/72
Tema

Sd. Kfz. 251/16 Flammpanzerwagen

Model brenda ITALERI komplet Sd. Kfz. 251/16 Flammpanzerwagen – ITALERI 7067.

Istorija:

The Sd.Kfz.251 half-track was an armored fighting vehicle and was used by the Wehrmacht on all fronts, during the Second World War. Powered by a Maybach 6-cylinder petrol engine was able to achieve, even in off-road terrain, the speed of 55 km / h. Produced in huge numbers, it was mainly used to transport the “Panzergranadiers” but, during the war, several versions has been developed to meet various operational needs. The half-track Sd.Kfz. 251/16 Flammpanzerwagen was developed as real flame tank to support infantry attacks against fortification or enemy positions. It was equipped with two flamethrowers on the sides of the vehicle. Furthermore, inside the vehicle, two tanks of flammable liquid, that allowed weapons to operate for about 160 seconds, has been installed.

Izvor: Italeri

Nastavi sa čitanjem

Views : 1542

M3 Lee Grant Medium Tank - Airfix A01317

Vazdušni fiks

Ref.A01317
TipKomplet modela
Skali1/76
Tema

M3 Lee Grant Medium Tank

Model brenda Vazdušni fiks komplet : M3 Lee Grant Medium Tank – Airfix A01317.

Called the Generale Li if fitted with the American designed taller turret and the General Grant if fitted with the British built smaller turret, the Lee Grant was one of the first American tanks to reach the British during the Second World War. Also used across the Pacific, the Lee Grant led to the design of the Sherman tank, the Allies’ most important and numerically vital tank of the war.

Izvor: M3 Lee Grant Medium Tank on Airfix

Nastavi sa čitanjem

Views : 1682

Renault B1 Bis

Renault B1 bis

ZemljaFrancuska
Model

B1 bis

TipTežak tenk
U službi1936–1940 (Francuska)
Izgradio405)

Foto-galerija a Renault B1 bis, Razvoj tenka se pokazao kao dug proces i nije odmah standardizovan zbog ekonomskih, političkih i međunarodnih problema. Iz istih razloga, naručene količine su držane male. Prva narudžbina 'serije' potpisuje se 6. aprila 1934. godine za 7 primera, druga u Oecemberu 1934 za još 20, a traje trećina od 5 29. aprila 1935. godine. 50, sa 3 prototipa, ukupan iznos je 35 primera, dovoljan da opremi ceo bataljon. Izgradnja je poverena različitim koizgovaračima programa, konačna skupština je odgovornost i Renoa i FCM.

Izvor: Numeriši

Nastavi sa čitanjem

Views : 5639