GAF Pika | |
|---|---|
| Kraju | Australia |
| Roli | Dron docelowy |
| Pierwszy lot | 28 sierpnia 1952 |
| Zbudowany | 517 |
Tthe GAF Jindivik to sterowany radiowo dron produkowany przez Australian Government Aircraft Factories (GAF). Nazwa pochodzi od aborygeńskiego australijskiego słowa oznaczającego "ścigany". Dwa ręcznie sterowane prototypy, zostały zbudowane jako GAF Pika (Projekt jako dowód koncepcji do testowania aerodynamiki, silnika i systemów sterowania radiowego, seryjne A92-1/2, "B-1/2". Sterowany radiowo Jindivik został początkowo oznaczony jako Projekt B i otrzymał seriale w serii A93. Pika to aborygeńskie australijskie słowo oznaczające lotnika
Źródła: GAF Pika na Wikipedii
| GAF Pika | |
|---|---|
| Fotograf | Władimir Yakubov |
| Lokalizacja | Muzeum RAAF, Point Cook |
| Zdjęcia | 47 |
Zobacz też:
General Characteristics and Role
The GAF Pika was a single-seat, manned, experimental jet aircraft developed by the Government Aircraft Factories (GAF) in Australia. Its primary and sole role was to serve as a proof-of-concept testbed for the larger Jindivik pilotless target drone program. The Pika (an Aboriginal Australian word meaning “flier”) was essentially the Jindivik airframe modified with a cockpit, side air intakes (to clear space for the pilot), and a conventional retractable tricycle undercarriage. Only two prototypes were built (A93-1 and A93-2). By flying the Pika first, engineers could safely test the Jindivik’s unique aerodynamics, the performance of its jet engine, and the complex radio control systems before attempting unmanned flight, making it the only Australian-designed and built manned jet aircraft to date.
| Property | Typical Value (GAF Pika) |
|---|---|
| Typu | Experimental Jet Aircraft / Testbed |
| National Origin | Australia |
| Producent | Government Aircraft Factories (GAF) |
| First Flight | October 31, 1951 (or November 4, 1950, sources vary) |
| Załogi | 1 (Pilot) |
| Max Takeoff Weight | Approx. 1,315 kg (2,900 lb) |
| Długość | 7.08–7.49 m (23 ft 3 in – 24 ft 7 in) |
| Rozpiętość | 5.79–5.8 m (19 ft 0 in – 19 ft 0 in) |
Powerplant and Performance
- Engine: 1 x Armstrong Siddeley Adder ASA.1 turbojet engine.
- Thrust: Approx. 3.9 kN (1,050 lbf).
- Maximum Speed: Approx. 756 km/h (470 mph).
- Service Ceiling: Approx. 9,754 m (32,000 ft).
- Endurance: Limited to around 30 minutes due to the reduced fuel load necessitated by the pilot’s cockpit and undercarriage.
- Unique Purpose: The Pika could be flown manually by the pilot or controlled remotely by a ground station, providing crucial training for the future Jindivik operators.
- Air Intakes: Unlike the subsequent Jindivik (which had a dorsal intake), the Pika featured two side-mounted air intakes.
Service History and Legacy
- Test Program: The two prototypes logged over one hundred flights during testing at the Woomera Rocket Range in South Australia.
- Key Findings: The trials confirmed the Jindivik’s aerodynamic stability and performance envelope. One significant result was proving that the final Jindivik design did not require a rudder, leading to cost and weight savings.
- Successor: The knowledge gained from the Pika directly led to the successful development and mass production of the GAF Jindivik, which became a globally exported, high-altitude target drone used by Australia, the UK, Sweden, and the US Navy.
- Final Status: The last flying Pika (A93-2) ended its flying career in 1954. The sole surviving prototype is preserved and on public display at the RAAF Museum in Point Cook, Victoria.
Liczba wyświetleń : 1408
