Piper PA-34-200T Seneca II

Piper PA-34 Seneca

LandNorge , Norge
RolleForretnings- og personlige fly
Første flytur25. april 1967
5037

Den Piper PA-34 Seneca er et tomotors lett fly, produsert i USA av Piper Aircraft. Den har vært i ikke-kontinuerlig produksjon siden 1971. Seneca brukes først og fremst til personlig og forretningsflyging.

Kilde: Piper PA-34 Seneca på Wikipedia
Piper PA-34-200T Seneca II Walk Around
Fotograf Vladimir Yakubov
Lokalisering Åpent hus på Hayward flyplass 2013
Bilder 87
Vent, søker Piper PA-34 Seneca for deg ...

FMS Rc-fly for voksne Fjernstyrt fly 1300MM (52

Les også:

Andre verdenskrig: Den definitive visuelle historien fra Blitzkrieg til atombomben (DK Definitive Visual Histories) - Amazon verdenskrig kart etter kart (DK historie kart etter kart) - Amazon


General Characteristics

The Piper Seneca II was the first significant upgrade to the Seneca line, certified in 1974. It was designed to address performance shortcomings of the original Seneca I, primarily by introducing turbocharging for high-altitude operations and improving the aircraft’s handling characteristics.

Property Value (PA-34-200T)
Rolle Light Twin-Engine, Business/Personal Transport
Produsenten Piper Aircraft Corporation
Introdusert 1975 Model Year (Certified 1974)
Mannskapet 1 pilot
Kapasitet Up to 5 passengers (6 total seats)
Vingespenn 11.86 m (38 ft 10.87 in)
Max Takeoff Weight 2,073 kg (4,570 lb)

Powerplant and Performance

  • Engines: Two Continental TSIO-360-E or EB six-cylinder, air-cooled, horizontally-opposed piston engines.
  • Key Improvement: The “T” in the designation stands for Turbocharged, which provides 200 hp (215 hp at 12,000 ft) per engine up to the aircraft’s critical altitude, significantly boosting high-altitude performance.
  • Engine Configuration: Retained the counter-rotating engine arrangement from the Seneca I, where the right engine’s propeller turns the opposite direction of the left, largely offsetting the effects of adverse yaw and eliminating the “critical engine” factor.
  • Maximum Cruise Speed: Approximately 348 km/h (188 knots) at optimum altitude.
  • Service Ceiling: 7,620 m (25,000 ft), reflecting its new turbocharging capability.
  • Rate of Climb: 7.87 m/s (1,550 ft/min) (Two Engines, Sea Level).

Design Changes and Features

  • Handling Improvements: Piper addressed handling complaints from the original Seneca I by incorporating enlarged and balanced ailerons, a rudder anti-servo tab, and a stabilator bobweight.
  • Seating: Introduced optional “club seating”, where the two middle-row seats face rearward, increasing passenger legroom and comfort.
  • Fuel Capacity: Optional tanks allowed for a total usable fuel capacity of up to 466 liters (123 US gallons).
  • Load Limitation: All weight in excess of 1,814 kg (4,000 lb) was required to be fuel.

Visninger : 366

legg igjen et svar

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong> 

Nødvendig

Dette nettstedet bruker Akismet til å redusere spam. Finn ut hvordan kommentardataene dine behandles.