대형 난파차 M1 |
|
|---|---|
| 국가 | 미국 |
| 역할 | 10톤 6×6 난파선 |
| 생산 | 1941-1945 |
| 아니요. 내장 | 5,765 |
Tthe Kenworth 10톤 6×6 Heavy Wrecking Truck (G116) (공식 Heavy Wrecking Truck M1)는 제 2 차 세계 대전 중 미 육군의 표준 헤비 레커였습니다. 1950 년대에는 5 톤 구조차로 대체되었습니다.
소스: Heavy Wrecking Truck M1 위키피디아
| Ward LaFrance M1A1 Walk Around | |
|---|---|
| 사진 작가 | Unknow |
| 로컬라이제이션 | Unknow |
| 사진 | 44 |
Ward LaFrance M1A1 01
Ward LaFrance M1A1 02
Ward LaFrance M1A1 03
Ward LaFrance M1A1 04
Ward LaFrance M1A1 05
Ward LaFrance M1A1 06
Ward LaFrance M1A1 07
Ward LaFrance M1A1 08
Ward LaFrance M1A1 09
대기,검색 무거운 파괴 트럭 M1 당신을 위해...
| Ward LaFrance M1A1 Walk Around | |
|---|---|
| 사진 작가 | Unknow |
| 로컬라이제이션 | Unknow |
| 사진 | 20 |
참고 항목:
General Characteristics
The Ward LaFrance M1 and its refined M1A1 variant were the standard heavy wreckers used by the US Army during World War II. Designed to recover and tow disabled light and medium tanks, as well as any other heavy wheeled vehicles, the M1A1 was vital for field maintenance and battlefield clearance.
| Property | Value (M1A1 Series 5) |
|---|---|
| 역할 | Heavy Wrecker / Recovery Vehicle |
| 제조업체 | Ward LaFrance Truck Corporation (Co-produced by Kenworth) |
| Entered Service (M1A1) | 1943–1944 |
| 승무원 | 2 (Driver, Operator) |
| Drive Configuration | 6×6 (All-wheel drive) |
| Curb Weight | ~14,200 kg (~31,200 lb) |
| Max Towed Load | ~27,000 kg (~60,000 lb) |
Powerplant and Mobility
- Engine: Continental 22-R in-line 6-cylinder gasoline engine (overhead-valve type).
- Displacement: 8.2 L (501 cu in).
- Power Output: 108 kW (145 hp) at 2,400 rpm.
- Transmission: Fuller 5-speed manual transmission with a separate 2-speed transfer case (10 forward speeds total).
- Maximum Speed: 72 km/h (45 mph).
- Range: Approximately 400 km (250 miles).
- Brakes: Full air brakes (Bendix-Westinghouse system).
- Cab Type: Open “torpedo” cab with a folding canvas top (a key visual difference from the earlier closed-cab M1).
Recovery Equipment
- Front Winch: Capacity of 9,100 kg (20,000 lb). Used for self-recovery or pulling vehicles toward the front.
- Rear Crane: Gar Wood single boom, hydraulically (later motor) operated.
- Crane Winch Capacity: 21,500 kg (47,500 lb).
- Crane Lifting Capacity: Up to 7,300 kg (16,000 lb) at short radius.
- Slew: 180-degree traverse.
- Tools: Carried one of the largest on-vehicle inventories of tools and equipment, including welding/cutting torches (oxygen/acetylene bottles), block and tackle, tow bars (A-frames), and various specialized recovery tools.
- Stabilization: Equipped with outriggers at the rear and boom jacks to stabilize the truck during heavy lifts.
조회수 : 416
