Lehký tank M7

Lehký tank M7

ZeměSPOJENÉ STÁTY
KategorieObrněná vozidla
TypLehká nádrž
PopisAlbum 94 procházkové fotografie "M7 Light Tank"

Fotogalerie na lehkém tanku M7, Objednaný jako nástupce populárního tanku M5 nikdy nepřekročil prototypovou fázi, bylo vyrobeno pouze 7 kusů. M5 nemohl konkurovat Shermanu M4.

Technické vlastnosti: Armement: canon de 75mm et une mitrailleuse MG 0.3″ Moteur: Wright R975, 9 cyl. Whirlwind radial, gas, 340 hp Vitesse: 50 Km/h Autonomie: 160 Km Poids: 25t

Čekání, Hledání M7 Light Tank pro vás ...

Viz také:

Druhá světová válka: Definitivní vizuální historie od Blitzkriegu po atomovou bombu (DK Definitive Visual Histories) - Amazon Druhá světová válka Mapa podle mapy (DK History Map by Map) - Amazon


The M7 Medium Tank, initially conceived as the T7 Light Tank, was a World War II armored vehicle project by the United States intended to replace the M3/M5 “Stuart” light tank series. Due to successive requirements for increased armor and firepower, the tank grew significantly in weight during its development, ultimately exceeding the specifications for a light tank and leading to its reclassification as a medium tank.


Development and Classification Changes

The T7 Light Tank Program

  • Initial Requirement: The program began in 1941 to design a new light tank, aiming for a combat weight of under 14 short tons (12.7 tonnes), armed with a 37 mm gun, and featuring a low silhouette.
  • Weight Creep: As development progressed through prototypes (T7E2, T7E3, T7E4), the Ordnance Department and Armored Force requested a heavier main gun—first the British 57 mm (6-pounder), and finally the American 75 mm M3 gun (the same as the M4 Sherman).
  • Armor Increase: Correspondingly, armor thickness was increased to handle the heavier armament and match contemporary threats, pushing the weight past the original 14-ton limit.

Standardization and Cancellation

  • Reclassification: By the time the T7E5 prototype was ready, its combat weight had reached approximately **24.5 short tons** (22.2 tonnes). It was standardized as the **M7 Medium Tank** in August 1942.
  • Production Failure: International Harvester Co. was contracted to build 3,000 M7s, but production models were found to be even heavier than the prototypes, approaching 29 short tons.
  • Project Cancellation: The M7 was deemed **inferior** in performance and reliability to the already standardized and mass-produced **M4 Sherman**, while offering no significant operational benefit. Production was halted in July 1943 after only **13 units** were fully completed.

Technical Specifications (M7 Medium Tank)

General Characteristics

Specifikace Detail
Designation Medium Tank M7
Posádky 5 (Commander, Gunner, Loader, Driver, Co-Driver)
Mass (Combat) Approx. 24.5 tonnes (54,000 lb)
Délka 5.23 m (17 ft 2 in)
Šířka 2.84 m (9 ft 4 in)

Armament and Armor

Component Detail
Main Armament 1 x 75 mm M3 L/40 gun
Ammunition Capacity 71 rounds (75 mm)
Secondary Armament 3 x .30 cal (7.62 mm) M1919A4 machine guns
Armor (Max Frontal) Up to 64 mm (2.5 in) on the gun shield
Hull Construction Predominantly cast homogeneous steel with sloped frontal armor.

Mobility and Powerplant

Component Detail
motor Continental R975-C1 9-cylinder radial gasoline
Engine Power 400 hp (298 kW)
Maximum Speed Approx. 48 km/h (30 mph) on road
Suspenze Vertical Volute Spring Suspension (VVSS)

The M7 project represents a transitional design in American tank development, illustrating the difficulty of balancing speed, armor, and firepower as battlefield requirements evolved in World War II.


Počet zobrazení: 3186

Zanech odpověď

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong> 

Požadované

Tento web používá Akismet ke snížení spamu. Zjistěte, jak jsou zpracovávána data komentářů.