Къртис XF15C-1

Къртис XF15C-1

СтранаСащ
ТипПрототип на изтребител със смесено задвижване
ФотографВладимир Якубов
Тема

Албум на 67 снимки разходка около а «Curtiss XF15C-1»

Фото галерия на Къртис XF15C-1, The Къртис XF15C-1 was a mixed-propulsion fighter prototype of the 1940s. The first flight of the first prototype was on 27 February 1945, without the turbojet installed. When this was completed in April of the same year, the aircraft flew several mixed-power trials, however on May 8 it crashed on a landing approach. The second prototype flew for the first time on 9 July, again in 1945, and was soon followed by a third prototype. Both aircraft showed promise, however by October 1946 the Navy had lost interest in the mixed-power concept and cancelled further development.

Източник: Къртис XF15C-1 в Уикипедия

Продължи да четеш

Гледания : 2090

Pz.Kpfw. 35(t) - Бронко CB35065

Bronco

Ref

CB35065

ТипМащабен модел
Мащаб1/35
Описание

Комплект за Пз.Кпфв. 35(т)

A kit from the brand Bronco the kit: "Pz.Kpfw. 35(t) – Бронко CB35065".

1. Шкода Лт Вз35 was a light tank developed for the Czech army in the mid-1930’s. In 1934 pilot tanks were requested from Skoda and CKD, both tanks were ready for testing in mid-1935. The Skoda design won the contest and was put into production by both companies in 1936. The Skoda Lt Vz35 weighed 10.5 tons and had a 3-man crew. Armour protection was a maximum of 25mm and the tank was armed with a 37mm anti-tank gun and 7.92mm co-axial machine gun. By the end of 1936 orders had been placed for 298 tanks for the Czech army. In addition export orders were placed by Romania, Afghanistan and Bulgaria for a further 136 tanks. On the conquest of Czechoslovakia by the Germans in March 1938, the Skoda Lt Vz35 becameknown as the Panzerkampfwagen 35(t) and was pressed into service with the German army. It saw action in Poland, France and Russia. Most were issued to the 1st Light Panzer Division (Poland and France) and the 6th Panzer Division in Russia. The tank was retired in early 1942, with 26 tanks sold to Romania, some hulls were retained as tractors and carriers.

Source: Bronco

Продължи да четеш

Views : 1647

Публикувано в Bronco.
Съветски тежък танк JS-7 - тромпетист 05586

Trumpeter

Ref 05586
ТипМодел комплект
Мащаб1/35
Тема

Soviet JS-7 Heavy Tank

Модел на марката Trumpeter комплекта: Soviet JS-7 Heavy Tank – Trumpeter 05586.

The kit consists of over 390+ parts : -the kit w/refined detail -multi-slide moulded lower hull and turret -photo-etched parts included

In 1948, the IS-7 тежък резервоар was developed. Weighing 68 metric tons, thickly armoured and armed with a 130 mm C-70 gun, it was the largest tank ever built by the USSR. Although it was in many ways an innovative design, it was never accepted for mass production due to its cumbersome size and the very impractical layout of its fighting compartment.

Source: Trumpeter

Продължи да четеш

Гледания : 1412

ФРЕНСКИ СУПЕР ТЕЖЪК ТАНК CHAR 2C - Meng модел

Модел менг

RefCHAR 2C
ТипSUPER HEAVY TANK
Мащаб1/35
Тема

FRENCH SUPER HEAVY TANK CHAR 2C

KIT INFO : This 1/35 scale French Super Heavy Tank Char 2C plastic model kit precisely replicates the features of the first riveted super heavy multi-turret tank designed during WWI. Lights are provided with clear parts. All grilles of the engine compartment are represented in PE parts. Cement-free workable tracks are easy to assemble. Paint options are offered for three vehicles (No.90/93/97). Total length: 293.2mm Width: 85.2mm

Char 2C was a French super heavy tank designed in the last phase of WWI. It’s still the biggest tank ever taken into production in the world. It was developed by a French shipyard, Forges et Chantiers de la Méditerranée (FCM) located near Toulon. It had a crew of 12. Its main armament was a 75mm gun and auxiliary armament was four 8mm machine guns. It was 10.27m long and 3m wide with a loaded weight of 69t. It was powered by two German Maybach 250hp engines via electric transmission. It could drive at the speed of 12-15km/h. Its armour- 45mm at the front and 22mm at the sides- could stand the attack of anti-tank weapons in the 1920s and 1930s. Most interestingly, the 10 Char 2Cs ever produced were named after the ancient regions of France.

Източник:

Meng.com

Продължи да четеш

Гледания : 2205

Комплект Grumman F4F-4 Wildcat - Airfix A55214

Airfix

RefА55214
ТипКомплект модели
Мащаб1/72
Тема

Grumman F4F-4 Wildcat

Модел на марката Airfix комплекта: Grumman F4F-4 Wildcat Starter Set – Airfix A55214.

Scale: 1:72 Skill: 2 Flying Hours: 1 Number of Parts: 58

1. Grumman F4F-4 Wildcat was an American carrier-based fighter aircraft that began service with both the United States Navy and the British Royal Navy with high air combat kill-to-loss ratios. The Wildcat was built throughout the war to serve on escort carrier where larger and heavier fighters could not be used..

Източник: Grumman F4F-4 Wildcat на Airfix

Продължи да четеш

Views : 1714

Публикувано в Airfix.
Бензинов резервоар Шевролет C60S - IBG 35036

Модели на ИБГ

Ref35036
ТипМодел комплект
Мащаб1/35
Тема

Бензинов резервоар Шевролет C60S

Комплект образуват марката Модели на ИБГ комплекта: Chevrolet C60S бензинов резервоар – ИБГ 35036

Бензиновият танкер IBG Models Chevrolet C60S се доставя както с тип кабина 12, така и с 13, и така това предлага на моделиерите избор за коя версия предпочитат. Предоставените изображения правят този модел да изглежда много обещаващ по отношение на задната помпена станция, шасито и кабината.

Източник: Chevrolet on IBG Models

Продължи да четеш

преглеждания : 2121

Horch 108 тип 40 мек топ - ICM 35478

Icm

Мащаб1/35
Ref35478
Тема

Horch 108 Typ 40 Soft Top

Модел на марката Icm : комплектът Horch 108 Typ 40 Soft Top – ICM 35478.

New version of the kit 100% new molds HORCH 108 Typ 40 ; 4 wheel drive, 2 wheel steering, hydraulic brakes produced 9/1941 to early 1943, quantity built 4600+

Източник: Horch 108 Typ 40 on ICM

Продължи да четеш

Views : 1504

Публикувано в Icm.
Немски sd.Kfz.221 Лейстер панцерспаген - шеф хоби 83812

Хоби Шеф

Тема

German Sd.Kfz.221 Leichter Panzerspahwagen (3rd Series)

Мащаб1/35
Ref83812

Модел на марката ХобиБос комплекта: German Sd.Kfz.221 Leichter Panzerspahwagen – HOBBY BOSS 83812

Функции : – Fully detailed Interior – Multi-directional slide moulded Upper hull – Two-directional slide moulded Lower hull – Four rubber tires w/fine detail – photo-etched parts included

1. Leichter Panzerspähwagen were a series of light four-wheel drive armoured cars produced by Nazi Germany from 1935 to 1944. It used the standard sPkw I Horch 801 chassis with an angled armoured body and turret. The rear mounted engine was a 67 kW (90 hp) Horch 3.5 petrol engine, giving it a road speed of 80 km/h and a cross-country speed of 40 km/h . It had a maximum range of 300 km. Used by the reconnaissance battalions (Aufklärungs-Abteilung) of the Panzer divisions, the type performed well enough in countries with good road networks, like those in Western Europe. However, on the Eastern Front andNorth Africa, this class of vehicle was hampered by its relatively poor off-road performance. In those theaters, it gradually found itself replaced in the reconnaissance role by the Sdkfz 250 half-track.

Източник: Хоби Шеф

Продължи да четеш

Views : 1737

Американски брониран булдозер - MiniArt 35188

Мини Арт

Мащаб1/35
Ref35188
Тема

U.S. ARMOURED BULLDOZER

Модел на марката Мини Арт : комплектът U.S. ARMOURED BULLDOZER – MiniArt 35188.

This kit contains 767 parts. Box contains model of U.S. Bulldozer. COMPLETE Package. EVERYTHING you need for an ACCURATE MODEL in ONE BOX. · Up-to-date technology using sliding moulds. · Highly detailed model · Fully-detailed engine compartment and chassis · Total 767 parts · 757 plastic parts · 8 PE parts · 2 Clear parts · Decals included · Full-color instruction · Workable track link

Източник: U.S. ARMOURED BULLDOZER on ICM

Продължи да четеш

Views : 1390

Немски 3t 4x2 камион FlaK 38

Dragon Models

Ref 6828
Тип1/35 Военни от Втората световна война
Мащаб1/35
Тема

German 3t 4×2 Truck w/2cm FlaK 38

Модел на марката Драконови модели комплекта: German 3t 4×2 Truck w/2cm FlaK 38 – DRA6828

Dragon has done a remarkable job in developing this 1/35 scale kit of the 3t 4×2 truck. It’s made even more attractive by the fact that it’s a 2-in-1 kit, with modellers having the option of assembling a regular cargo truck, or one mounting a 2cm FlaK 38 cannon in the rear cargo bed. All the parts for this antiaircraft cannon are included in the box, and the weapon can be adjusted to depict different firing positions. Further options come from the fact that the cab doors, engine hoods and tailgate can be assembled open. There is even a fully detailed engine as well. This was a popular truck in German service, and this kit will be just as much in demand thanks to its versatility and accuracy.

Източник: Драконови модели

Продължи да четеш

преглеждания : 2055