Icm | |
|---|---|
| Réf | 35466 |
| Echelle | 1/35 |
| Sujet | Henschel 33D1 |
A mock-up of the brand Icm : la maquette “Henschel 33D1 WWII German Army Truck”. Les camions Henschel 33 D1 ont été largement utilisés par toutes les armes allemandes de service dans le front Russe, en Afrique du Nord, l’Italie, la France jusqu’à la fin de la guerre. Châssis, moteur et l’habitacle sont bien détaillés. 4 planches de décoration inclues.
Views : 2429
MiniArt | |
|---|---|
| Réf | 35100 |
| Type | Maquette |
| Echelle | 1/35 |
| Sujet | Pz.Kpfw. Mk.III 749 (VALENTINE) |
A mock-up of the brand MiniArt la maquette de char "Pz.Kpfw. Mk.III 749(e) Valentine III w/CREW" .
Version Beutepanzer (Captured Armored Vehicles) of the British infantry tank "Infantry Tank Mk.III Valentine" with the three crew members.
HistoryBased on the Cruiser Mk II tank, the Valentine was designed by the Vickers-Armstrong Company and proposed to the Ministry of War in February 1938. Its designers had tried to combine the weight of a Cruiser tank (so as to be able to reuse the suspensions and transmission elements) with the armour of an infantry tank, which produced a small vehicle with a cramped interior and a turret served by two men. Although its engine is weaker than that of the Matilda tank, because of its lighter armour it had the same top speed and was much easier and cheaper to produce.
Source: Valentine on Wikipedia
Views : 1217
Tamiya | |
|---|---|
| Réf | 35317 |
| Type | Maquette |
| Echelle | 1/35 |
| Sujet | 6X4 Truck Krupp Protze (Kfz.70) Personnel Carrier |
Une maquette chez Tamiya “6X4 Truck Krupp Protze (Kfz.70) Personnel Carrier“.
The L 2 H 43 and L 2 H 143 “Krupp-Protze” (unofficial designation) was a six-wheeled German truck and artillery tractor used by German forces in World War II. It was powered by a 55 hp or 60 hp (since 1936) Krupp M 304 4-cylinder petrol engine. Its main purpose was to tow artillery, especially the PaK 36. It was also used to transport infantry and other utility uses. This vehicle was extensively used on the Eastern Front, North African campaign and in France and Sicily. The “Krupp-Protze” was of relatively advanced design. It was mass-manufactured between 1933 and 1941. Its fuel consumption was relatively high (24 Litres / 100 km on road) in comparison to the comparable Opel Blitz 1.5 t truck (16.5 liters / 100 km, produced 1938 – 1942). Total production was about 7,000 units.
Source: wikipedia
Views : 2609
Voyager Model | |
|---|---|
| Ref | PE36140 |
| Type | Photo-cutting |
| Echelle | 1/35 |
| Sujet | WWII British 17pdr Anti-tank Gun Mk.I |
Pour Bronco 35024
A photoetch set from Voyager Model, the photoetch set "WWII British 17pdr Anti-tank Gun Mk.I (For Bronco 35024)".
Le canon Ordnance QF 17 pounder (ou 17-pdr) est un canon anti-char britannique de calibre 76,2 mm en usage au cours de la Seconde Guerre mondiale. C’était le meilleur canon anti-char des alliés : équipé d’obus perforants, il pouvait détruire le blindage de presque tous les chars allemands. Il fut utilisé sur son propre affût et équipa de nombreux chars de combats. Les britanniques l’utilisèrent aussi pour réarmer des véhicules étrangers, par exemple les chasseurs de chars Sherman Firefly, qui mirent leurs unités de tanks au niveau de celles des allemands. En tant que canon anti-char, il fut remplacé après la guerre par le 120 mm BAT sans recul. Sur les chars, il fut remplacé par l’Ordnance QF 20 pounder.
Views : 1130
Voyager Model | |
|---|---|
| Réf | PE354071 |
| Type | Photo-cutting |
| Echelle | 1/35 |
| Sujet | German Benz L4500A truck |
Pour Zvezda 02312
A photoetched set from Voyager Model the photoetched set "WWII German Benz L4500A truck (For zvezda 02312)".
From 1931, the models were designated by the prefix L (for lastwagen). During the war more than 64,000 utility trucks were produced and almost exclusively for the army. In 1938, the German government established restrictions and Daimler-Benz was allowed to produce only trucks with two axles of 3, 4.5, and 6 tons. At the end of the war, the firm manufactured a series of trucks called Opel Blitz.
Views : 2066
Voyager Model | |
|---|---|
| Ref | PE35377-PEA088-VBS0111 |
| Type | Photo-cutting |
| Echelle | 1/35 |
| Sujet | WWII German Tiger I MID Production |
For DRAGON 6660
A photoetched set from Voyager Model, the photoetching set "WWII German Tiger I MID Production".
The Tiger I (Tigre), char d’assaut allemand, est l’un des chars les plus connus de la Seconde Guerre mondiale, bien qu’il n’ait été que peu produit par rapport au T-34 soviétique ou au Sherman américain. Ce sont ses dimensions, ses lignes très carrées, sa résistance au combat, sa puissance ainsi que les équipages expérimentés l’ayant mené au feu qui ont marqué les esprits, notamment du fait de la propagande allemande.
Source: wikipedia
Views : 1785
Dragon Models | |
|---|---|
| Ref | 6526 |
| Type | Scale model |
| Scale | 1/35 |
| Topic | Pz.Kpfw.IV Ausf.H Mid-Production |
A kit from the brand DRAGON Models the “Pz.Kpfw.IV Ausf.H Mid-Production Sep-Nov ’43”.
Dragon’s newest 1/35 Panzer IV Smart Kit shows such an Ausf.H variant. Specifically it’s a subtype produced from September-November 1943. While it uses a good number of components from previous Panzer IV kits, there are also newly tooled parts to enable an accurate rendering of this Ausf.H Mid-Production tank. The air filter is located on the right-hand side of the hull, which required the kit designers to remake the hull plate, for example. Slide-molded parts are widely resorted to, plus there are also metal parts such as the side skirts to give a true-to-scale thickness. This is another welcome arrival, allowing modelers to easily replicate a specific Panzer IV subject dating from the late 1943 timeframe.
Source: Pz.Kpfw.IV on DML
Views : 1422
Cyber Hobby | |
|---|---|
| Ref | 6661 |
| Type | Scale model |
| Scale | 1/35 |
| Topic | Jagdpanzer 38 Mid Production |
A kit from the brand Cyber-Hobby the kit “Jagdpanzer 38 Mid Production”.
These Jagdpanzer 38(t) Hetzers supported Panther G tanks in this story, and this tank destroyer is now represented as a 1/35 scale plastic model kit. The form of the Hetzer is accurately represented, as are all the details. The various Black Knight insignia found on this tank destroyer are accurately reproduced with suitable decals, including the correct vehicle identification numbers. Two Black Knight figures are also included as bonus accessories.
Source: Jagdpanzer 38 on CYBER-HOBBY
Views : 702
Black Dog | |
|---|---|
| Ref | 35046 |
| Type | Accessoires |
| Echelle | 1/35 |
| Sujet | US M10 accessories set |
A set of improves at Black Dog the resin accessory set "US M10 accessories set 35046".
The Tank Hunter M10 Wolverine (le nom officiel américain du M10 était « affût automoteur ») est un véhicule blindé américain construit à partir de 1942 utilisé pendant la Seconde Guerre mondiale. Pour suppléer à la faiblesse antichar des Sherman, les Américains dotèrent leurs unités d’un véhicule spécialisé dans la lutte antichar, à l’instar des chasseurs de chars allemands. Le M10 Wolverine était mécaniquement très proche du Sherman et son train de roulement était commun. Sa superstructure et sa tourelle étaient par contre originales. Le canon de 76,2 mm valait largement celui du Panzer IV, mais se révèla trop faible contre le blindage des chars allemands plus lourds. Livré aux Britanniques et adaptés par eux, le M10 prit le nom d’Achilles. Le véhicule est parfois surnommé Wolverine ou Slugge
Source: US M10 sur Wikipedia
Views : 889
Trumpeter | |
|---|---|
| Ref | 05532 |
| Type | Maquette |
| Echelle | 1/35 |
| Sujet | Sd.Kfz.6/2 |
A model from Trumpeter the "Sd.Kfz.6/2 3.7cm – TRUMPETER 05532".
The SdKfz 6 (Sonderkraftfahrzeug 6) was a halftrack used during World War II by Germany. It was designed to be used as the main tractor machine of the 105 mm FH artillery gun. However, its construction price proved to be far too high and it was abandoned for other types of half-tracks. However, the existing vehicles were kept in the German army.
Source: SdKfz 6 on Wikipedia
Views: 1346