IBG Models | |
|---|---|
| Réf | 35012 |
| Type | Maquette |
| Echelle | 1/35 |
| Sujet | Bussing-Nag 4500 S |
A mock-up of the brand IBG Models The kit: Bussing-Nag 4500 S - IBG 35012
The Bussing-Nag 4500 S was a German truck that was manufactured from 1942 to 1945. This truck is the successor to the type 500S, which, if it doesn't look like it externally, still takes up much of its technology.
Source: Bussing-Nag 4500S on IBG Models
Views : 1739
IBG Models | |
|---|---|
| Réf | 35011 |
| Type | Maquette |
| Echelle | 1/35 |
| Sujet | Bussing Nag 500A |
A mock-up of the brand IBG Models The kit: Bussing-Nag 500A – IBG 35011
The Bessing-NAG 500 was a German truck that was manufactured from 1938 to 1942. The version of the B-Ssing-NAG 500 A was developed from the beginning of 1939 and was produced in small quantities between 1940 and 1942. In contrast to the type 500S, which had 7 ventilation flaps, the type B-ssing-NAG 500A had first 4 and then 5 in the side plates of the engine hood.
Source: Bussing-Nag 500A on IBG Models
Views : 1665
IBG Models | |
|---|---|
| Réf | 35010 |
| Type | Maquette |
| Echelle | 1/35 |
| Sujet | Bussing-Nag 500S |
A mock-up of the brand IBG Models The kit: Bussing-Nag 500S - IBG 35010
The Bessing-NAG 500 was a German truck that was manufactured from 1938 to 1941. Starting in 1940, it was designated as the type 500 S. Powered by a 6-cylinder diesel engine delivering 105 hp, this truck had a payload of 4.75 tons. The first vehicles in this series manufactured for the Wehrmacht had the standard open driver's cab.
Source: Bussing-Nag 500S on IBG Models
Views : 1632
IBG Models | |
|---|---|
| Réf | 35007 |
| Type | Maquette |
| Echelle | 1/35 |
| Sujet | Einheitsdiesel with small field kitchen Hf.14 |
Une maquette de la marque IBG Models le kit : Einheitsdiesel with small field kitchen Hf.14 – IBG 35007
Le Einheitsdiesel Hf.14 est une version du camion allemand 6×6 Einheitsdiesel transformé en cantine mobile.
Views : 1621
IBG Models | |
|---|---|
| Réf | 35004 |
| Type | Maquette |
| Echelle | 1/35 |
| Sujet | Einheitsdiesel Kfz.61 |
A mock-up of the brand IBG Models The kit: Einheitsdiesel Kfz.61 – IBG 35004
The Einheitsdiesel Kfz.61 est une version du camion allemand 6×6 Einheitsdiesel transformé en standard téléphonique.
Views : 2114
IBG Models | |
|---|---|
| Réf | 35003 |
| Type | Maquette |
| Echelle | 1/35 |
| Sujet | Einheitsdiesel Pritschenwagen |
A mock-up of the brand IBG Models The kit: Einheitsdiesel Pritschenwagen – IBG 35003
The Einheitsdiesel Pritschenwagen is the discovery cabin cargo version of the German 6×6 Einheitsdiesel. More than 17,000 copies of this truck used by the Wehrmacht were produced between 1937 and 1940.
Source: IBG 35003 on IBG Models
Views : 1615
IBG Models | |
|---|---|
| Ref | 35002 |
| Type | Maquette |
| Sale | 1/35 |
| Topic | BMW R12 with sidecar military version |
A kit from the brand IBG Models the kit : BMW R12 with sidecar military version – IBG 35002
Classic late 1930s-WWII BMW-built motorcycle R-12 with passenger sidecar, militarized variant. Kit has fully detailed frame and engine, sidecar with interior detail, saddlebags, injection-molded spoked wheels with separate 3-piece tires (2 sidewalls and central tread), and optional parts for 2 configurations (unarmed or with MG 34 equipped gondola).
Source: IBG 35002 on IBG Models
Views : 3105
Dragon Model | |
|---|---|
| Ref | 6691 |
| Type | Model kit |
| Scale | 1/35 |
| Topic | RSO/01 Type 470 |
A kit from the brand Dragon Model the set : RSO/01 Type 470 – DML 6691.
Dragon has already introduced later variants of the RSO to the modeling fraternity in 1/35 scale, but now comes the most common version of this German prime mover. The acronym RSO stands for Raupenschlepper Ost, which translates as “Caterpillar Tractor East”. The terrible muddy and icy conditions experienced on the Eastern Front convinced Germany of the need for a highly mobile, tracked vehicle. Steyr proposed the RSO and it immediately became a popular vehicle thanks to its mobility and reliability. In all, about 23,000 RSO vehicles were produced by a range of manufacturers. The original version had a pressed-steel cab and a typical truck-style cargo bed at the rear. It was powered by a Steyr 85hp V8 engine that offered a top speed of 30km/h Dragon’s new 1/35 scale model depicts the standard RSO/01, this type with rounded steel cab being the best known of all the versions used by Germany. Indeed, the complex shape of the cab was created by a Japanese model-maker, and it is easily the most accurate cab available on the market today. The cab is a sophisticated piece of molding in terms of detail and measurements, with all the curves accurately reproduced in miniature. Many modelers have been waiting a long time for Dragon to produce this iconic version of the RSO, and they won’t be disappointed with this new kit. For those wishing to create a dynamic Eastern Front diorama scene, this RSO tractor will prove irresistible!Source: DML 6691 on Dragon Models
Views : 2065
Half-Track M2 | |
|---|---|
| Country | USA |
| Type | Half Track |
| Description | Photo album of 108 photos walk-around of a M2 HalfTrack |
Gallery Photo of a Half-Track M2, The M2 Half Track was an armored vehicle produced by the United States during World War II
Views : 5805
Hasegawa | |
|---|---|
| Ref | 01996 |
| Type | Scale model |
| Scale | 1/72 |
| Topic | Aichi E13A1 Zero Model 11 |
A kit from the brand Hasegawa the kit : «Aichi E13A1 Zero Model 11 Midway Limited Edition – Hasegawa 01996».
The Imperial Japanese Navy used the Aichi E13A floatplane for long-range recon from 1941-1945. Aichi E13A1s squared off against U.S. Naval ships and planes in the Battle of Midway. After the dust settled, three E13A1s from the cruiser Chikuma were lost – along with two from the Tone. This limited edition kit features a catapult.
Source: Aichi E13A1 Zero on HasegawaUsa
Views : 2407