Arquivos do Autor: SdKfz.000

Carro blindado leve IJA Type94 TK – Moldes finos FM17

Postado em Modificado em Por | Deixar uma resposta
Carro blindado leve IJA Type94 TK - Moldes finos FM17

Moldes finos

Tópico

IJA Type94 Carro Blindado Leve TK

Escala1/35
Ref FM17

Um modelo da marca Moldes finos o kit IJA Tank Destroyer Type 3 HONI III – Fine Molds FM20

Been developed for the purpose of transporting supplies and infantry support in the front, it was the core of the early days of the Army cavalry, light armored vehicles ninety-four formula is [TK]. Two-seater body are grouped into very compact, a machine gun armed挺6.5mm. From 1937 until the end of the war, transportation, contact, such as reconnaissance was active. ■ type and type repair late : Light armor formula ninety-four has been developed with the aim of supporting infantry transport and goods in the front lines, starting with the incident Shina size with an extremely compact two – seater, important until the conclusion of the War has been appointed as an armored force. Late in production has increased the stability of the traveling-by shooting when things changed to a large rear wheel guidance, to be grounded.

Continue lendo →

Visualizações : 768

Destroier de Tanque IJA Tipo 3 HONI III – Moldes Finos FM20

Postado em Modificado em Por | Deixar uma resposta
Destruidor de Tanques IJA Tipo 3 HONI III - Moldes Finos FM20

Moldes finos

Sujet

IJA Tank Destroyer Type 3 HONI III

Escala1/35
Ref FM20

Um modelo da marca Moldes finos o kit IJA Tank Destroyer Type 3 HONI III – Fine Molds FM20

Tank three formula [Honi Ⅲ] is the administrative headquarters was planned by the Army as a weapon (armor) car Hosen (= 75 ms half 7 cm) in 1943 seven half centimeter. In addition to the personality of the car Hosen and basic self-propelled artillery half centimeter seven set was deployed combat already [Honi I], and the primary mission of the control kill box of conventional, the ability to combat anti-tank may be able to compete on enemy tanks powerful developed to prepare. Using the chassis of the Type 97 medium tank, had a room full protective battle armor there is sufficient while fixed. Gun has been expected as a tank equipped with a seven centimeter formula three semi-tank gun with a basis of field artillery ninety formula, can be defeated at the 600m distance from the front of the U.S. Army M4 tanks.

Continue lendo →

Visualizações : 1069

Destroier de Tanque IJA Tipo 2 HO-I – Moldes Finos FM24

Postado em Modificado em Por | Deixar uma resposta
Fine Molds FM24 - IJA Tank Destroyer Type 2 HO-I

Moldes finos

Sujet

IJA Tank Destroyer Type 2 HO-I

Escala1/35
Ref FM24

Um modelo da marca Moldes finos o kit IJA Tank Destroyer Type 2 HO-I – Fine Molds FM24

One of the combat vehicle of the Japanese Army during World War II, the military has been adopted as a vehicle to be able to fight enemy tanks using the “bullets” for anti-tank forming explosive bullet. Its structure is the chassis of the tank in, equipped with a tank gun (7.5cm) of remodeling Sanpo ninety-nine half centimeter Equation 7. Both about 30 troops have been deployed to Japan to enter mass production in the mainland since 1944.

Continue lendo →

Visualizações : 1008

IJA Main Battle Tank Tipo 97 CHI-HA – Moldes Finos FM25

Postado em Modificado em Por | Deixar uma resposta
Tanque de Batalha Principal IJA Tipo 97 CHI-HA - Moldes Finos FM25

Moldes finos

Sujet

Tanque de Batalha Principal IJA Tipo 97 CHI-HA

Escala1/35
Ref FM25

Um modelo da marca Moldes finos o kit IJA Main Battle Tank Type 97 CHI-HA – Fine Molds FM25

Until the end of the war from the start of production in 1938, became the core tank in the tank unit of Japan is “Chiha” Type 97 medium tank. 57 mm tank gun with a suitable support such as infantry, was equipped with an air-cooled diesel engine operation easy even in cold climates. Been changed in the armor so as to cover part of the engine exhaust heat from the late side of the rear chassis production, production has been a considerable number.

Continue lendo →

Views : 1935

IJA Main Battle Tank Type 97 SHINHOTO CHI-HA Early Hull – Moldes Finos FM26

Postado em Modificado em Por | Deixar uma resposta
IJA Main Battle Tank Type 97 SHINHOTO CHI-HA Early Hull - Moldes Finos FM26

Moldes finos

Sujet

IJA Main Battle Tank Type 97 SHINHOTO CHI-HA Early Hull

Escala1/35
Ref FM26

Um modelo da marca Moldes finos o kit IJA Main Battle Tank Type 97 SHINHOTO CHI-HA Early Hull – Fine Molds FM26

It was active in the core and tank forces in the Japanese Type 97 tank is [Chiha]. Initially the car this had been primarily intended to support infantry, from the 1942 production to prepare for turret a large antitank gun 47mm with improved capacity tank of [Chiha turret new] will be initiated. Was shifted to one side of the car to change the shape of the second half of the body which contains the engine, engine cooling efficiency and improved elasticity of Thailand, transitional vehicle chassis includes a new turret also conventional was seen.

Continue lendo →

Visualizações : 1425

Tanque de Batalha Principal IJA Tipo 97 CHI-HA – Moldes Finos FM27

Postado em Modificado em Por | Deixar uma resposta
Tanque de Batalha Principal IJA Tipo 97 CHI-HA - Moldes Finos FM27

Moldes finos

Sujet

Tanque de Batalha Principal IJA Tipo 97 CHI-HA

Escala1/35
Ref FM27

Um modelo da marca Moldes finos o kit IJA Main Battle Tank Type 97 CHI-HA – Fine Molds FM27

Estava ativo no núcleo e nas forças de tanques no tanque japonês Tipo 97 é Chiha. Inicialmente o carro que tinha sido destinado principalmente a apoiar a infantaria, a partir do 1942 produção para preparar para a torre um grande canhão antitanque 47mm com tanque de capacidade melhorada da torre Chiha novo será iniciado. Foi deslocado para um lado do carro para mudar a forma da segunda metade do corpo que contém o motor, eficiência de refrigeração do motor e elasticidade melhorada da Tailândia, o chassi do veículo de transição inclui uma nova torre também convencional foi visto.

Continue lendo →

Visualizações : 3307

Tanque Médio IJA Tipo 5 CHI-RI – Moldes Finos FM28

Postado em Modificado em Por | Deixar uma resposta
Tanque Médio IJA Tipo 5 CHI-RI - Moldes Finos FM28

Moldes finos

Sujet

IJA Medium Tank Type 5 CHI-RI

Escala1/35
Ref FM28

Um modelo da marca Moldes finos o kit IJA Medium Tank Type 5 CHI-RI – Fine Molds FM28

In the Imperial Army, became the last tank in the order of five tanks in the formula developed is [Chile]. And the length of the barrel 75mm cannon main gun with automatic loading system, was installed in the vehicle body front 37mm cannon as secondary weapon. Will be scaled up significantly compared with the tanks of the Imperial Army until it is thick front armor 75mm, 35t weight and has been developed to become a tank of the latest and strongest pure Japanese style. There is a document description is made only a single prototype vehicle in March 1945, tests were carried out with the fire-traveling. At the war’s end the occupation forces have been requisitioned to remove the gun in the state.

Continue lendo →

Views : 1534

3 IJA Tanque Médio Tipo CHI-NU Versão de Cano Longo – Fine Molds FM29

Postado em Modificado em Por | Deixar uma resposta
IJA Tanque Médio Tipo 3 CHI-NU versão de cano longo - Moldes finos FM29

Moldes finos

Sujet

Tanque Médio IJA Tipo 3 CHI-NU versão de cano longo

Escala1/35
Ref FM29

Um modelo da marca Moldes finos o kit IJA Medium Tank Type 3 CHI-NU Long-Barreled version – Fine Molds FM29

Na fórmula três foram produzidos a partir do final de 1944 tanque [dourada do mar negro], mas foi equipado com uma arma de tanque foi desviado para campo arma a arma, e condições favoráveis não é verdade para os tanques M4 Sherman esteio das Forças Aliadas. O plano está programado para equipado com um canhão tanque (= 75mm metade 7 cm) meio centímetro sete fórmula cinco poderoso, a renovação da carruagem do canhão foi estudada para lutar com vantagem no Hosen à distância mais por isso.

Continue lendo →

Visualizações : 1315

IJA Tipo 94 6-Wheeled Truck Hard Top – Moldes finos FM30

Postado em Modificado em Por | Deixar uma resposta
IJA Tipo 94 Caminhão de 6 Rodas com Capota Rígida - Moldes Finos FM30

Moldes finos

Sujet

IJA Type 94 6-Wheeled Truck Hard Top

Escala1/35
Ref FM30

Um modelo da marca Moldes finos o kit IJA Type 94 6-Wheeled Truck Hard Top – Fine Molds FM30

Development of this car in 1933, driving school that the Army was asked to begin manufacturing / design six-wheel truck only a military co-operation of both companies Industry Co., Ltd., electricity (gas) Tokyogasu Automotive Industry Co., Ltd. and. Long been used as a car until the end of the war after the outbreak of various special applications are also Shina Jihen, goods-transport vehicle as front-line troops. The standardization of parts and in order to use the Ministry of Commerce and Industry at the time was determined by the “standard form automobile,” and domestic automobile at the time said to be poor performance is a clear distinction, the trust of the troops in a robust and high performance was obtained.

Continue lendo →

Visualizações : 1190

Tampo de lona de caminhão de 6 rodas IJA tipo 94 - Fine Molds FM31

Postado em Modificado em Por | Deixar uma resposta
Fine Molds FM31 - Tampo de Lona para Caminhão de 6 Rodas IJA Tipo 94

Moldes finos

Sujet

IJA Type 94 6-Wheeled Truck Canvas Top

Escala1/35
Ref FM31

Um modelo da marca Moldes finos o kit IJA Type 94 6-Wheeled Truck Canvas Top – Fine Molds FM31

Development of this car in 1933, driving school that the Army was asked to begin manufacturing / design six-wheel truck only a military co-operation of both companies Industry Co., Ltd., electricity (gas) Tokyogasu Automotive Industry Co., Ltd. and. Long been used as a car until the end of the war after the outbreak of various special applications are also Shina Jihen, goods-transport vehicle as front-line troops. The standardization of parts and in order to use the Ministry of Commerce and Industry at the time was determined by the “standard form automobile,” and domestic automobile at the time said to be poor performance is a clear distinction, the trust of the troops in a robust and high performance was obtained.

Continue lendo →

Visualizações : 1064