Forfatterarkiver: SdKfz.000

SH-3G Sea King, USN Utility Transporter – Cyber-Hobby 5113

Skrevet den, Endret på Av | legg igjen et svar
SH-3G Sea King, USN Utility Transporter - Cyber-Hobby 5113

Cyber-Hobby

Ref5113
TypeModellsett
Skala1/72
Emnet

SH-3G Sea King, USN Utility Transporter

En modell av merkevaren Cyber-Hobby settet : SH-3G Sea King, USN Utility Transporter – Cyber-Hobby 5113.

Kilde: Cybber hobby

SH-3G Sea King USN Transporter rendered with stunning detail Newly reproduced sonobuoy cover Fitted door for sonobouy on belly of Sea King fuselage Wind wipers molded on cockpit Cockpit glazing made from crystal-clear parts 5-blades tail rotor realistically produced Detailed landing gear and buoyancy sponsons Authentic rotor w/intricate detail Slightly curved rotor blades reproduced One-piece fuselage reproduced w/intricate details Strengthened landing gear realistically portrayed Realistic steps included Realistic pilots’ seats included

The subject of Dragon’s latest 1/72 scale plastic kit is a delightful model of the American-designed Sikorsky SH-3G Sea King helicopter. Originally, the twin-engine SH-3 Sea King was used primarily in the role of anti-submarine warfare (ASW) by the US Navy (USN). It was also the first amphibious helicopter in the world and it entered USN service in 1961. Various modifications occurred in its lifespan, with a total of 105 SH-3A and SH-3D craft being converted into the versatile SH-3G. The latter was a cargo, utility and transport helicopter used by the USN. In the 1990s the SH-3 Sea King was replaced by the SH-60 Seahawk in the USN. This 1/72 scale Dragon plastic model is well designed and cleverly engineered to induce maximum modeling enjoyment. The fuselage is correctly proportioned and it’s furnished with a full level of detail both inside and outside. It has a new part to plug the gap where the sonar was originally located. The foldable rotor blades are made to true scale thickness too. With appropriate Cartograf decal markings for several USN squadrons available, this SH-3G is ready to lift off in service of the navy!

Fortsett å lese →

Visninger : 949

Sd.Kfz.3 Maultier Ambulanse - DML 6766

Skrevet den, Endret på Av | legg igjen et svar
Sd.Kfz.3 Maultier ambulanse - DML 6766

Dragon Model

Ref 6766
Type1/35 Andre verdenskrig Militær
Skala1/35
Emnet

Sd.Kfz.3 Maultier Ambulance

En modell av merkevaren Dragon Modell settet : Sd.Kfz.3 Maultier Ambulance – DML 6766

Brand new Maultier Ambulance rendered w/fine detail / Spare wheel mounted on cab roof-rack Side doors and rear doors can be assembled open/closed / Footstep for side door can be assembled up/down Rear access steps can be assembled stowed up/positioned down / Ventilator can be optionally assembled Two types of blinds provided / Stretcher racks provided Stretchers can be fabricated in various configurations / Realistic storage cabinet in interior Detailed seats included / Toolbox included Stretcher produced w/crisp detail / Realistic engine hood formed from multiple parts w/louver detail Detailed radiator cover w/filler cap / Accurately shaped front fenders Side-molded engine hood frame / Two options for door handles can be assembled Detailed dashboard and cab interior / Intricate driver’s seat w/realistic cloth pattern Fully detailed chassis / Delicate engine represented Intricate fuel tank mounted on chassis / Sprockets and idler wheels rendered w/accurate detail Realistic road wheels assembled from separate parts / Realistic engine hood covers can be assembled open/closed Cab doors can be assembled open/closed / Includes clear lenses for headlamps and spotlights Delicate wheels w/authentic tire tread pattern / Finely detailed vehicle tools Highly detailed Magic Tracks reproduced / Newly produced optional idler wheels

The 7.1-tonne Maultier, introduced from 1942 onwards, was largely successful although it wasn’t quite as mobile as purpose-built halftracks. One interesting variant was a Maultier Ambulance that could be used for battlefield evacuation. Dragon is proud to be the first manufacturer to offer a plastic kit of this unique vehicle!

Kilde: Dragon

Fortsett å lese →

Visninger : 1077

12,8cm Kanone (К 81/2) - Ace Modeller 72521

Skrevet den, Endret på Av | legg igjen et svar
12,8cm Kanone (К 81/2) - Ace Modeller 72521

Ace Modeller

Ref 72521
TypeModell
Skala1/72
Emnet

12,8cm Kanone (К 81/2)

En modell av merkevaren Ace Modeller settet: 12,8cm Kanone (К 81/2) – Ace Models 72521.

12.8 cm Kanone 81(K-81/2) was a German heavy anti-tank gun designed to fight against heavy Soviet tanks like IS-2. The German army had encountered the Russian 122 mm guns and had issued a requirement for a similar weapon. Approximately 50 barrels and breeches were used on existing carriages. The weapon that used the ex-French GPF-T carriage was known as the K 81/1 while the K 81/2 used the ex-Russian A-19/ML-20 carriages with shield and balancing gear removed. the cradle and recoil system were discarded and the 128mm gun was mounted in a ring cradle similar to that used on the 81/1. Another version K 81/2 was also built, in which original Russian equilibrators were retained.

Kilde: ACE-modeller

Fortsett å lese →

Views : 1929

M-48 Patton M48A2C – ITALERI 7068

Skrevet den, Endret på Av | legg igjen et svar
M-48 Patton M48A2C - ITALERI 7068

Italeri

Ref 7068
TypeModellsett
Skala1/72
Emnet

M-48 Patton M48A2C

Den mellomstore tanken M-48 Patton ble født under den kalde krigen for å erstatte den forrige, og utbredt, M-47. De første enhetene ble levert til United States Army i begynnelsen av 50-tallet. Sammenlignet med forgjengeren brukte M-48 et nytt skrog og et nytt tårn, laget både ved fusjon og mer beskyttende, og et nytt fjæringssystem. De tidlige versjonene vedtok den samme 90 mm. pistolen til M-47. M-48 Patton ble produsert i løpet av sin historie i et imponerende antall og spilte en aktiv rolle i flere krigsteater. Mye, brukt siden 1965, under Vietnamkrigen, og spesielt av Marinekorpset, ble "Patton" også brukt av israelerne, sammen med den tyngre Centurion, under seksdagerskrigen i 1967. Versjonen A2 ble karakterisert, spesielt av motor, transmisjoner og tårnforbedringer.

Kilde: Italeri

Fortsett å lese →

Views : 2535

HU-16A Albatrosas – Trompetist 02821

Skrevet den, Endret på Av | legg igjen et svar
HU-16A Albatrosas - Trumpeter 02821

Trumpeter

Ref 02821
TypeModellsett
Skala1/48
Emnet

HU-16A Albatross

En modell av merkevaren Trumpeter settet: HU-16A Albatross – Trumpeter 02821.

Features : Detailed fuselage w/accurate design – Canopy made from clear parts – Optional position flaps – Finely detailed engine , cockpit,gear cabin, – photo etched parts included – optional metal undercarriage or plastic undercarriage – rubber tires

Den HU-16 Albatross was made by the Grumman Co. of the US, it equipped with two R-1820-76D reciprocating engines of each with 1425 horse powers.The maximum speed of the Albatross is 200 mph, maximum range is 2660 miles and service ceiling is 21000 feet. It can carry 10 passengers or many kinds of rescue equipments. The first flight of the HU-16 was on October 24, 1947.

Source: Trumpeter

Fortsett å lese →

Views : 1380

Italiensk Heavy Tank P40 – Tamiya 89792

Skrevet den, Endret på Av | legg igjen et svar
Italiensk Heavy Tank P40 - Tamiya 89792

Tamiya

Ref 89792
EmnetSkala modell
Skala1/35
Emnet

Italian Heavy Tank P40

En modell av merkevaren Tamiya settet: Italian Heavy Tank P40 – Tamiya 89792 .

During WWII, the only heavy tank produced by Italy was the P40. The P stands for Pesante, or heavy in Italian, and the number 40 for the year of adoption, 1940. The tank featured bogey-style wheels on a lead spring suspension. The riveted hull construction was the same as the earlier Carro Armato M13/40 (Item 32596). The tank was equipped with a 75mm gun and an 8mm Breda machine gun and was powered by a 330hp V12 diesel engine. The P40 adopted sloped armor after encountering the Soviet T-34s in battle. Roughly 1,200 tanks were order, but only a few were completed before the Italian Armistice in 1943. Approximately 100 tanks were use from then to the end of the war in Northern Italy and Yugoslavia.

-Limited edition 1/35 scale plastic assembly kit of the Italian Heavy Tank P40. -Made by Italeri. -Length: 165mm. -Riveted hull, sloped armor, and leaf spring suspension have all been realistically reproduced. -Assembly type tracks included. -Photo-etched parts include exhaust covers, jerry can racks, and fender stays. -Markings included to depict Fiat Ansaldo’s prototype tank as well as German vehicles. (3 types of markings total). -40 page photo reference book included. -Item 89796 1/35 Metal Gun Barrel for Italian Heavy Tank P40 (Available Seperately.

Kilde: Tamiya

Fortsett å lese →

Views : 3330

AEC Mk.II pansret bil - MiniArt 35155

Skrevet den, Endret på Av | legg igjen et svar
AEC Mk.II pansret bil - MiniArt 35155

MiniArt

Ref35155
TypePansret bil
Skala1/35
Emnet

AEC Mk.II Armoured Car
En modell av merkevaren MiniArt settet: AEC Mk.II pansret bil - MiniArt 35155. AEC Armoured Car is a series of heavy armoured cars built by the Associated Equipment Company (AEC) during the Second World War. The first example was demonstrated in early 1941, and an order was placed in June of that year. The first version carried a Valentine Mk II turret with 2 pounder gun. Vehicles of later variant designs carried heavier armament. Mk II version has heavier turret with a 6 pounder gun, redesigned front hull, 158 hp diesel engine. The weight of Mk II is 12.0 t. Mk II and Mk III armored cars ble brukt på det kontinentale Europa. Produksjonen av alle AEC-pansrede bilmerker opphørte etter at 629 var produsert. Mk II / Mk III deltok i kampene i Europa med britiske og britiske indiske hærenheter. I 1944 ble et parti AEC-pansrede biler sendt inn i Jugoslavia for bruk av partisaner, overførte biler ble brukt i mer enn 10 år.

Detaljer om modellen: ·Highly detailed model ·487 plastic parts ·44 PE parts ·Decals are included ·Full-color instruction ·All New Tooling. Up-to-date technology using sliding moulds. ·Fully detailed interior ·Highly detailed engine compartment ·Engine is accurately represented ·Fighting compartment is truly reproduced ·Crews vision periscopes with clear plastic parts ·Driving compartment interior is fully detailed and correctly done ·All doors and hatches can be assembled open or closed ·Slide-molded tire made by 1 detail in plastic

Kilde:Miniart

Fortsett å lese →

Visninger : 1237

BM-31 12 Katyusha rakettkaster – WalkAround

Skrevet den, Endret på Av | legg igjen et svar
BM-31 12 Katyusha rakettkaster - WalkAround

BM-31 12

LandURSS
TypeKatyusha rakettkaster
Emnet

Album av 200 bilder av en BM-31 12 Katyusha

Fotogalleri av en BM-31 12 Katyusha rakettkaster, Katyusha multiple rocket launchers are a type of rocket artillery first built and fielded by the Soviet Union in World War II. Multiple rocket launchers such as these deliver a devastating amount of explosives to a target area more quickly than conventional artillery, but with lower accuracy and requiring a longer time to reload. They are fragile compared to artillery guns, but are inexpensive and easy to produce. Katyushas of World War II, the first self-propelled artillery mass-produced by the Soviet Union, were usually mounted on trucks. This mobility gave the Katyusha (and other self-propelled artillery) another advantage: being able to deliver a large blow all at once, and then move before being located and attacked with counter-battery fire. Katyusha weapons of World War II included the BM-13 utskyter, lett BM-8 og tung BM-31. I dag brukes kallenavnet også på nyere lastebilmonterte sovjetiske rakettkastere – spesielt den vanlige BM-21 – og derivater.

Kilde: Wikipedia

Fortsett å lese →

Views : 9679

Sd.Kfz. 9 Famo vol3 – WalkAround

Skrevet den, Endret på Av | legg igjen et svar
SdKfz 9 Famo

Sd.Kfz. 9 Famo

LandTyskland
TypeTungt halvspor
Produsert 1939–45
Bygget2500+

Den Sd.Kfz. 9 also known as “Famo” was a German half-track that saw widespread use in World War II, and the heaviest half-track vehicle of any type built in quantity in Nazi Germany during the war years. Its main roles were as a prime mover for very heavy towed guns such as the 24 cm Kanone 3 and as a tank recovery vehicle. Approximately 2,500 were produced between 1938 and 1945.

Kilde: Famo on Wikipedia

Fortsett å lese →

Visninger : 5215