SdKfz.000 - Page 185 - NET-MAQUETTES

Fine Molds FW1 - IJN Imperial Navy destroyer Ayanami

Fine Molds
Sujet	IJN Imperial Navy destroyer Ayanami
Scale	1/350
Ref	FW1

A model of the brand Fine Molds the kit IJN Destroyer AMAGIRI with PT-Boat PT-109 – Fine Molds FW2

Five countries victors of the First World War, including Japan, by the Washington Naval Treaty was signed in the year (1928) 1922, Japan has become that further aircraft carrier-battleship is subject to restrictions on ownership even the cruiser. Navy was forced to the need to review the concept of maritime defense until then, in order to enhance the light cruiser following auxiliary vessels not subject to limits of the treaty, and then embarked on expansion and enhancement of the first destroyer. Kan No. 1 is handed over to the year (1928) 1928, destroyer, also called type “special” since, but now the hull larger, than the destroyer of the traditional, should be noted that compared to their size There is a high performance sail heavily armed and were significantly improved, the appearance of this ship is said to be shocked the powers. It also has an accomplished in the Senka large vessels (one of which vessels sunk) vessels that damage to two U.S. destroyers in the Third Battle of Solomon.

Continue reading →

Fine Molds
Sujet	IJN Destroyer AMAGIRI with PT-Boat PT-109
Scale	1/350
Ref	FW2

A model of the brand Fine Molds the kit IJN Destroyer AMAGIRI with PT-Boat PT-109 – Fine Molds FW2

Fog is a heaven and destroyer USS No. 15 snowstorm type (type II specific ship type No. 5). Sky fog had supported the Japanese troops committed to the Solomon Islands to transport “rat”, including the island of Guadalcanal. The developing strategy of transportation for which is one of the strategy such transport, to the island Koronban Gala Islands New Georgia in the Solomon Islands, “PT-boat torpedo John · F · Kennedy president of the United States later chairman boat in the Strait of bracket conflicts with the 109 “, PT-109 is sunk.

Continue reading →

IJA Type 97 light armored car TE-KE - Fine Molds FM10

Fine Molds
Sujet	IJA Type 97 light armored car TE-KE
Scale	1/35
Ref	FM10

A model of the brand Fine Molds the kit IJA Type 97 light armored TE-KE – Fine Molds FM10

Reconnaissance on the battlefield, it has been developed for search and contact is Type 97 light armor is [Teke]. Said body has been put together into a compact and lightweight, as a vehicle of this type and can be top class in the world, was produced machine gun type and 7.7mm, two types of tank gun type 37mm.

Continue reading →

Fine Molds
Sujet	IJA Medium Tank Type 3 CHI-NU
Scale	1/35
Ref	FM11

A model of the brand Fine Molds the kit IJA Medium Tank Type 3 CHI-NU – Fine Molds FM11

During the last mass-produced in Japan in the Army Tank Corps in the formula three tanks this tank is [black sea bream. Been developed as much as possible at the core of the tank unit and set on behalf of the Medium Tank Type 97 medium tank, equipped with three 75mm tank gun type II. Type 97 in attack power, became more powerful than the set, we collected the tank can be expected as the coalition forces against the M4 Sherman.

Continue reading →

Fine Molds FM12 - IJA Medium Tank Type 1 CHI-HE

Fine Molds
Sujet	IJA Medium Tank Type 1 CHI-HE
Scale	1/35
Ref	FM12

A model of the brand Fine Molds the kit IJA Medium Tank Type 1 CHI-HE – Fine Molds FM12

It was developed as a main battle tanks of the Japanese Army tank followed by the [Chiha new turret] of Type 97, the tank during the set is [Tibet]. The basis of the development of Type 97 tanks, 240 hp from 170 hp to strengthen it up to the engine, in normal Type 97 also increased to 50mm thick armor was up to 25mm. Was equipped with a 47mm tank gun and set.

Continue reading →

Fine Molds FM16 - IJA Type 95 Light Tank HA-GO

Fine Molds
Sujet	IJA Type 95 Light Tank HA-GO
Scale	1/35
Ref	FM16

A model of the brand Fine Molds the kit IJA Type 95 Light Tank HA-GO North Manchuria – Fine Molds FM18

Record the number of the largest production in the Japanese tank, was become the center of forces fighting the Japanese Army Tank, Light Tank ninety-five formula is [(c) issue]. There the army was advancing to the early Showa era of mechanized forces, has been developed as a “tank” Mobile with an emphasis on mobility. Equipped with a tank gun, air-cooled diesel engine with 120 horsepower. Reliability, durability has been active in every theater from 1935 until the end of the war high.

Continue reading →

IJA Type94 Light Armored Car TK Late - Fine Molds FM19

Fine Molds
Topic	IJA Type94 Light Armored Car TK Late
Scale	1/35
Ref	FM19

A model of the brand Fine Molds the kit IJA Tank Destroyer Type 3 HONI III – Fine Molds FM20

Been developed for the purpose of transporting supplies and infantry support in the front, it was the core of the early days of the Army cavalry, light armored vehicles ninety-four formula is TK. Two-seater body are grouped into very compact, a machine gun armed挺6.5mm. From 1937 until the end of the war, transportation, contact, such as reconnaissance was active. ■ type and type repair late : Light armor formula ninety-four has been developed with the aim of supporting infantry transport and goods in the front lines, starting with the incident Shina size with an extremely compact two – seater, important until the conclusion of the War has been appointed as an armored force. Late in production has increased the stability of the traveling-by shooting when things changed to a large rear wheel guidance, to be grounded.

Continue reading →

IJA Type 95 Light Tank HA-GO North Manchuria - Fine Molds FM18

Fine Molds
Topic	IJA Type 95 Light Tank HA-GO North Manchuria
Scale	1/35
Ref	FM18

A model of the brand Fine Molds the kit IJA Type 95 Light Tank HA-GO North Manchuria – Fine Molds FM18
Record the number of the largest production in the Japanese tank, was become the center of forces fighting the Japanese Army Tank, Light Tank ninety-five formula is [(c) issue]. There the army was advancing to the early Showa era of mechanized forces, has been developed as a “tank” Mobile with an emphasis on mobility. Equipped with a tank gun, air-cooled diesel engine with 120 horsepower. Reliability, durability has been active in every theater from 1935 until the end of the war high. ■ What type (Yes, I Do or e) is North Manchuria North Manchuria type, which is one of the remodeling type of light tank ninety-five formula [(c) issue] will be traveling across the field kaoliang in sorghum (approximately northeastern China ※) Manchuria When, for the wheel is stuck in the ridge of the field rotation, the type equipped with wheels auxiliary compact between the cross-wheels at the bottom, each unit was deployed to Manchuria mainly of use, submitted to the case Nomonhan The fire and sprinkled with Soviet troops are.

Continue reading →

IJA Type94 Light Armored Car TK - Fine Molds FM17

Fine Molds
Topic	IJA Type94 Light Armored Car TK
Scale	1/35
Ref	FM17

A model of the brand Fine Molds the kit IJA Tank Destroyer Type 3 HONI III – Fine Molds FM20

Been developed for the purpose of transporting supplies and infantry support in the front, it was the core of the early days of the Army cavalry, light armored vehicles ninety-four formula is [TK]. Two-seater body are grouped into very compact, a machine gun armed挺6.5mm. From 1937 until the end of the war, transportation, contact, such as reconnaissance was active. ■ type and type repair late : Light armor formula ninety-four has been developed with the aim of supporting infantry transport and goods in the front lines, starting with the incident Shina size with an extremely compact two – seater, important until the conclusion of the War has been appointed as an armored force. Late in production has increased the stability of the traveling-by shooting when things changed to a large rear wheel guidance, to be grounded.

Continue reading →

Fine Molds
Sujet	IJA Tank Destroyer Type 3 HONI III
Scale	1/35
Ref	FM20

A model of the brand Fine Molds the kit IJA Tank Destroyer Type 3 HONI III – Fine Molds FM20

Tank three formula [Honi Ⅲ] is the administrative headquarters was planned by the Army as a weapon (armor) car Hosen (= 75 ms half 7 cm) in 1943 seven half centimeter. In addition to the personality of the car Hosen and basic self-propelled artillery half centimeter seven set was deployed combat already [Honi I], and the primary mission of the control kill box of conventional, the ability to combat anti-tank may be able to compete on enemy tanks powerful developed to prepare. Using the chassis of the Type 97 medium tank, had a room full protective battle armor there is sufficient while fixed. Gun has been expected as a tank equipped with a seven centimeter formula three semi-tank gun with a basis of field artillery ninety formula, can be defeated at the 600m distance from the front of the U.S. Army M4 tanks.

Continue reading →