作者档案： 斯德克夫兹.000

IJN帝国海军驱逐舰阿亚纳米 - 精细模具FW1

发布于 修改后打开 由 | 留言
精细模具FW1 - IJN帝国海军驱逐舰阿亚纳米号

精细模具

苏杰特

IJN帝国海军驱逐舰阿亚纳米号

规模1/350
裁判 FW1

品牌模型 精细模具 套件 IJN Destroyer AMAGIRI with PT-Boat PT-109 – Fine Molds FW2

Five countries victors of the First World War, including Japan, by the Washington Naval Treaty was signed in the year (1928) 1922, Japan has become that further aircraft carrier-battleship is subject to restrictions on ownership even the cruiser. Navy was forced to the need to review the concept of maritime defense until then, in order to enhance the light cruiser following auxiliary vessels not subject to limits of the treaty, and then embarked on expansion and enhancement of the first destroyer. Kan No. 1 is handed over to the year (1928) 1928, destroyer, also called type “special” since, but now the hull larger, than the destroyer of the traditional, should be noted that compared to their size There is a high performance sail heavily armed and were significantly improved, the appearance of this ship is said to be shocked the powers. It also has an accomplished in the Senka large vessels (one of which vessels sunk) vessels that damage to two U.S. destroyers in the Third Battle of Solomon.

继续阅读 →

视图 ： 889

IJN驱逐舰阿马吉里与PT船PT-109–精细模具FW2

发布于 修改后打开 由 | 留言
Ijn 驱逐舰阿马吉里与 Pt 船 Pt - 109 - 精细模具 Fw2

精细模具

苏杰特

IJN驱逐舰AMAGIRI与PT船PT-109

规模1/350
裁判 FW2

品牌模型 精细模具 套件 IJN Destroyer AMAGIRI with PT-Boat PT-109 – Fine Molds FW2

雾是一种天堂和驱逐舰USS No.15暴风雪类型（II型特定船类型5）。天空大雾支持了日本军队在所罗门群岛运送“老鼠”，包括瓜达尔卡纳尔岛。运输的发展战略是其中一种运输战略，到所罗门群岛新乔治亚岛的科龙班加拉群岛，“PT艇鱼雷约翰·F ·肯尼迪总统后来在舰船在海峡的支架上与“109”号发生冲突，PT-109被击沉。

继续阅读 →

意见 ： 1177

IJA型97轻型装甲车TE-KE–精细模具FM10

发布于 修改后打开 由 | 留言
IJA 型 97 轻型装甲车 TE-KE - 精细模具 FM10

精细模具

苏杰特

IJA 97型轻型装甲车TE-KE

规模1/35
裁判 调频10

品牌模型 精细模具 套件 IJA Type 97 light armored TE-KE – Fine Molds FM10

在战场上进行侦察，它已被开发用于搜索和接触是97式轻型装甲是[Teke]。所述车身已组合成紧凑轻便的，作为该类型且可世界一流的车辆，曾生产出机枪式和7.7mm型，两类坦克炮37mm。

继续阅读 →

视图： 1347

IJA 中型坦克类型 3 CHI-NU – 精细模具 FM11

发布于 修改后打开 由 | 留言
IJA 中型坦克类型 3 CHI-NU - 精细模具 FM11

精细模具

苏杰特

IJA 中型坦克类型 3 奇努

规模1/35
裁判 FM11

品牌模型 精细模具 套件 IJA Medium Tank Type 3 CHI-NU – Fine Molds FM11

在日本最后批量生产的陆军坦克团的公式三坦克这辆坦克是[黑海布雷姆。在坦克单元的核心尽可能开发，并代表中型坦克97型中型坦克，配备三个75毫米坦克炮II型。97型在攻击力上，变得比一套更强大，我们收集的坦克可以预期作为联军对M4谢尔曼。

继续阅读 →

意见 ： 1316

IJA 中型坦克类型 1 CHI-HE – 精细模具 FM12

发布于 修改后打开 由 | 留言
精细模具 FM12 - IJA 中型坦克类型 1 CHI-HE

精细模具

苏杰特

IJA 中型坦克类型 1 奇赫

规模1/35
裁判 FM12

品牌模型 精细模具 套件 IJA Medium Tank Type 1 CHI-HE – Fine Molds FM12

它被开发为日本陆军坦克的主要战斗坦克，其次是97型的[奇哈新炮塔]，在设置的坦克是[西藏]。在开发97型坦克的基础上，240马力从170马力加强到发动机，在正常97型也增加到50毫米厚的装甲高达25毫米。配备了47毫米坦克枪和设置。

继续阅读 →

视图： 1347

IJA类型95轻型坦克HA-GO–精细模具FM16

发布于 修改后打开 由 | 留言
精细模具 FM16 - IJA 类型 95 轻型坦克 HA-GO

精细模具

苏杰特

IJA 95式轻型坦克HA-GO

规模1/35
裁判 调频16

品牌模型 精细模具 套件 IJA Type 95 Light Tank HA-GO North Manchuria – Fine Molds FM18

记录的日系坦克产量最大，成为日本陆军坦克作战的部队中心，轻型坦克九十五式是[（c）问题]。在那里，军队正在推进到昭和早期的机械化部队，已被开发为“坦克”移动，强调机动性。配备坦克炮，风冷柴油发动机，功率为120马力。从1935年到战争结束，可靠性，耐用性一直活跃在每个战区。

继续阅读 →

浏览数： 1406

IJA类型94轻型装甲车TK晚-精细模具FM19

发布于 修改后打开 由 | 留言
IJA 类型 94 轻型装甲车 TK 晚 - 精细模具 FM19

精细模具

主题

IJA类型94轻型装甲车TK晚

规模1/35
裁判 FM19

品牌模型 精细模具 套件 IJA Tank Destroyer Type 3 HONI III – Fine Molds FM20

Been developed for the purpose of transporting supplies and infantry support in the front, it was the core of the early days of the Army cavalry, light armored vehicles ninety-four formula is TK. Two-seater body are grouped into very compact, a machine gun armed挺6.5mm. From 1937 until the end of the war, transportation, contact, such as reconnaissance was active. ■ type and type repair late : Light armor formula ninety-four has been developed with the aim of supporting infantry transport and goods in the front lines, starting with the incident Shina size with an extremely compact two – seater, important until the conclusion of the War has been appointed as an armored force. Late in production has increased the stability of the traveling-by shooting when things changed to a large rear wheel guidance, to be grounded.

继续阅读 →

视图 ： 883

IJA类型95轻型坦克HA-GO北满洲-精细模具FM18

发布于 修改后打开 由 | 留言
IJA 类型 95 轻型坦克 HA-GO 北满洲 - 精细模具 FM18

精细模具

主题

IJA 类型 95 轻型坦克 HA-GO 北满洲

规模1/35
裁判FM18
品牌模型 精细模具 套件IJA类型95轻型坦克HA-GO北满洲-精细模具FM18

Record the number of the largest production in the Japanese tank, was become the center of forces fighting the Japanese Army Tank, Light Tank ninety-five formula is [(c) issue]. There the army was advancing to the early Showa era of mechanized forces, has been developed as a “tank” Mobile with an emphasis on mobility. Equipped with a tank gun, air-cooled diesel engine with 120 horsepower. Reliability, durability has been active in every theater from 1935 until the end of the war high. ■ What type (Yes, I Do or e) is North Manchuria North Manchuria type, which is one of the remodeling type of light tank ninety-five formula [(c) issue] will be traveling across the field kaoliang in sorghum (approximately northeastern China ※) Manchuria When, for the wheel is stuck in the ridge of the field rotation, the type equipped with wheels auxiliary compact between the cross-wheels at the bottom, each unit was deployed to Manchuria mainly of use, submitted to the case Nomonhan The fire and sprinkled with Soviet troops are.

继续阅读 →

意见 ： 1072

IJA类型94轻型装甲车TK–精细模具FM17

发布于 修改后打开 由 | 留言
IJA 类型 94 轻型装甲车 TK - 精细模具 FM17

精细模具

主题

IJA 类型 94 轻型装甲车 TK

规模1/35
裁判 FM17

品牌模型 精细模具 套件 IJA Tank Destroyer Type 3 HONI III – Fine Molds FM20

Been developed for the purpose of transporting supplies and infantry support in the front, it was the core of the early days of the Army cavalry, light armored vehicles ninety-four formula is [TK]. Two-seater body are grouped into very compact, a machine gun armed挺6.5mm. From 1937 until the end of the war, transportation, contact, such as reconnaissance was active. ■ type and type repair late : Light armor formula ninety-four has been developed with the aim of supporting infantry transport and goods in the front lines, starting with the incident Shina size with an extremely compact two – seater, important until the conclusion of the War has been appointed as an armored force. Late in production has increased the stability of the traveling-by shooting when things changed to a large rear wheel guidance, to be grounded.

继续阅读 →

视图 ： 969

IJA坦克驱逐舰类型3霍尼I–精细模具FM20

发布于 修改后打开 由 | 留言
IJA 坦克驱逐舰类型 3 HONI III - 精细模具 FM20

精细模具

苏杰特

IJA坦克驱逐舰3型霍尼I

规模1/35
裁判 FM20

品牌模型 精细模具 套件 IJA Tank Destroyer Type 3 HONI III – Fine Molds FM20

坦克三配方[Honi III.]是行政总部计划由陆军作为武器（装甲）汽车霍森（+75毫秒半7厘米）在1943年7半厘米。除了车霍森的个性和基本的自行火炮半厘米七套已经部署战斗[Honi I]，和常规控制杀箱的主要任务，战斗反坦克的能力也许能够竞争对敌人坦克强大的发展准备。使用97型中型坦克的底盘，有一个房间全保护战斗装甲有足够的，而固定。枪已被期望为坦克装备了七厘米公式三半坦克枪与野战火炮90公式的基础，可以击败在600米距离从美国陆军M4坦克的前面。

继续阅读 →

意见：1266