SdKfz.000 - Page 185 - NET-MAQUETTES

IJA KUGISHO D4Y2-S JUDY - Fine Molds FB5

Fine Molds
Sujet	IJA KUGISHO D4Y2-S JUDY
Scale	1/48
Ref	FB5

A model of the brand Fine Molds the kit IJA KUGISHO D4Y2-S JUDY – Fine Molds FB5

Comet bomber aboard a warship has been developed as the successor of explosion ninety-nine ship has been diverted to the night fighter and leverage the high-speed performance, mobility and a sturdy airframe structure unique to the ship explosion. Mounted on the rear windshield obliquely upward in a 20mm machine gun and the main purpose of the interception of bombers at night. It is said to have been modified type 100 machine is more than twelve months Seishiki in 1944, it was struggling until the end of the war to intercept B-29.

Continue reading →

Fine Molds
Sujet	IJA Type 1 Fighter II NAKAJIMA Ki-41-II Early Version OSCAR
Scale	1/48
Ref	FB2

A model of the brand Fine Molds the kit IJA Type 1 Fighter II NAKAJIMA Ki-41-II Early Version OSCAR – Fine Molds FB2

Joint Strike Fighter as they fought the army to motility and light weapons, the peregrine falcon fighter is highly practical set. Two types is the type aimed at strengthening and shortened wingspan and engine output, and improved speed performance, equipped with two gates to hold the nose cannon 103.12 .7 mm, the maximum speed at 115 horsepower engine (c) of 1130 will demonstrate the 515km / h. Were all active in the theater as the main medium-term since World War II.

Continue reading →

Fine Molds FB1 - IJA KUGISHO D4Y1/D4Y2 JUDY

Fine Molds
Sujet	IJA KUGISHO D4Y1/D4Y2 JUDY
Scale	1/48
Ref	FB1

A model of the brand Fine Molds the kit IJA KUGISHO D4Y1/D4Y2 JUDY – Fine Molds FB1

Bomber aboard a warship of the Imperial Japanese Navy has been developed aiming at faster than a fighter bomber is a comet. High-speed performance with a Atsuta engine that Daimler-Benz DB601 engine to domestic production, surpassing the war to pursue the sophisticated aerodynamic zero. Troops are deployed from 1943, also being plagued by engine problems caused by too elaborate, it was active until the end of the war as the Navy’s capital ship explosion taking advantage of its high performance.

Continue reading →

Fine Molds FW1 - IJN Imperial Navy destroyer Ayanami

Fine Molds
Sujet	IJN Imperial Navy destroyer Ayanami
Scale	1/350
Ref	FW1

A model of the brand Fine Molds the kit IJN Destroyer AMAGIRI with PT-Boat PT-109 – Fine Molds FW2

Five countries victors of the First World War, including Japan, by the Washington Naval Treaty was signed in the year (1928) 1922, Japan has become that further aircraft carrier-battleship is subject to restrictions on ownership even the cruiser. Navy was forced to the need to review the concept of maritime defense until then, in order to enhance the light cruiser following auxiliary vessels not subject to limits of the treaty, and then embarked on expansion and enhancement of the first destroyer. Kan No. 1 is handed over to the year (1928) 1928, destroyer, also called type “special” since, but now the hull larger, than the destroyer of the traditional, should be noted that compared to their size There is a high performance sail heavily armed and were significantly improved, the appearance of this ship is said to be shocked the powers. It also has an accomplished in the Senka large vessels (one of which vessels sunk) vessels that damage to two U.S. destroyers in the Third Battle of Solomon.

Continue reading →

Fine Molds
Sujet	IJN Destroyer AMAGIRI with PT-Boat PT-109
Scale	1/350
Ref	FW2

A model of the brand Fine Molds the kit IJN Destroyer AMAGIRI with PT-Boat PT-109 – Fine Molds FW2

Fog is a heaven and destroyer USS No. 15 snowstorm type (type II specific ship type No. 5). Sky fog had supported the Japanese troops committed to the Solomon Islands to transport “rat”, including the island of Guadalcanal. The developing strategy of transportation for which is one of the strategy such transport, to the island Koronban Gala Islands New Georgia in the Solomon Islands, “PT-boat torpedo John · F · Kennedy president of the United States later chairman boat in the Strait of bracket conflicts with the 109 “, PT-109 is sunk.

Continue reading →

IJA Type 97 light armored car TE-KE - Fine Molds FM10

Fine Molds
Sujet	IJA Type 97 light armored car TE-KE
Scale	1/35
Ref	FM10

A model of the brand Fine Molds the kit IJA Type 97 light armored TE-KE – Fine Molds FM10

Reconnaissance on the battlefield, it has been developed for search and contact is Type 97 light armor is [Teke]. Said body has been put together into a compact and lightweight, as a vehicle of this type and can be top class in the world, was produced machine gun type and 7.7mm, two types of tank gun type 37mm.

Continue reading →

Fine Molds
Sujet	IJA Medium Tank Type 3 CHI-NU
Scale	1/35
Ref	FM11

A model of the brand Fine Molds the kit IJA Medium Tank Type 3 CHI-NU – Fine Molds FM11

During the last mass-produced in Japan in the Army Tank Corps in the formula three tanks this tank is [black sea bream. Been developed as much as possible at the core of the tank unit and set on behalf of the Medium Tank Type 97 medium tank, equipped with three 75mm tank gun type II. Type 97 in attack power, became more powerful than the set, we collected the tank can be expected as the coalition forces against the M4 Sherman.

Continue reading →

Fine Molds FM12 - IJA Medium Tank Type 1 CHI-HE

Fine Molds
Sujet	IJA Medium Tank Type 1 CHI-HE
Scale	1/35
Ref	FM12

A model of the brand Fine Molds the kit IJA Medium Tank Type 1 CHI-HE – Fine Molds FM12

It was developed as a main battle tanks of the Japanese Army tank followed by the [Chiha new turret] of Type 97, the tank during the set is [Tibet]. The basis of the development of Type 97 tanks, 240 hp from 170 hp to strengthen it up to the engine, in normal Type 97 also increased to 50mm thick armor was up to 25mm. Was equipped with a 47mm tank gun and set.

Continue reading →

Fine Molds FM16 - IJA Type 95 Light Tank HA-GO

Fine Molds
Sujet	IJA Type 95 Light Tank HA-GO
Scale	1/35
Ref	FM16

A model of the brand Fine Molds the kit IJA Type 95 Light Tank HA-GO North Manchuria – Fine Molds FM18

Record the number of the largest production in the Japanese tank, was become the center of forces fighting the Japanese Army Tank, Light Tank ninety-five formula is [(c) issue]. There the army was advancing to the early Showa era of mechanized forces, has been developed as a “tank” Mobile with an emphasis on mobility. Equipped with a tank gun, air-cooled diesel engine with 120 horsepower. Reliability, durability has been active in every theater from 1935 until the end of the war high.

Continue reading →

IJA Type94 Light Armored Car TK Late - Fine Molds FM19

Fine Molds
Topic	IJA Type94 Light Armored Car TK Late
Scale	1/35
Ref	FM19

A model of the brand Fine Molds the kit IJA Tank Destroyer Type 3 HONI III – Fine Molds FM20

Been developed for the purpose of transporting supplies and infantry support in the front, it was the core of the early days of the Army cavalry, light armored vehicles ninety-four formula is TK. Two-seater body are grouped into very compact, a machine gun armed挺6.5mm. From 1937 until the end of the war, transportation, contact, such as reconnaissance was active. ■ type and type repair late : Light armor formula ninety-four has been developed with the aim of supporting infantry transport and goods in the front lines, starting with the incident Shina size with an extremely compact two – seater, important until the conclusion of the War has been appointed as an armored force. Late in production has increased the stability of the traveling-by shooting when things changed to a large rear wheel guidance, to be grounded.

Continue reading →