Autoriaus archyvai: SdKfz.000

Vokiečių Panzerkampfwagen 35(t) – Tamiya 25112

Užregistruota Modifikuota prie | palik atsakymą
Vokiečių Panzerkampfwagen 35(t) - Tamiya 25112

Tamiya

Nuoroda 25112
TipasMaquette
Skalės1/35
Tema

Panzerkampfwagen 35(t)

This is a limited edition re-release of the 1/35 scale German Panzerkampfwagen 35t

Riveted construction and bogie-type suspension reproduced. Tracks feature one-piece straight sections for ease of assembly. Includes parts for MG37(t) machine guns, notek light, tools, and 12 early-type jerry cans. Commander figure may be assembled with a beret, side cap, or officer’s cap. 3 marking options included to depict tanks which saw action in Poland, France, and Russia. Tank parts are product of CMK.

Following Germany’s annexation of Czechoslovakia, the German army modified various Czech-made military hardware and pressed them into service. Among these was the LTvz.35 light tank built by Skoda, which was re-designated as the Pz.Kpfw.35(t). With an armament of one 37mm main gun and two 7.92mm machine guns and a 120hp liquid-cooled gasoline engine enabling a maximum speed of 34km/h, this light tank’s capabilities were on par with the German army’s Panzer III medium tanks. At the start of WWII, the 6th Panzer Division was equipped with about 200 of these tanks and they were used during the invasions of Poland and France, as well as the early stages of the invasion of Russia.

Šaltinis: Panzerkampfwagen 35(t) on Tamiya

Tęsti svarstymą →

Peržiūrėta : 1742

JAV lėktuvnešis "Yorktown" – Tamiya 31712

Užregistruota Modifikuota prie | palik atsakymą
JAV orlaivių vežėjas Yorktown - Tamiya 31712

Tamiya

Réf 31712
TipasMaquette
Skalės1/700
Sujetas

U.S. Aircraft Carrier Yorktown

1/700 scale plastic assembly kit of the Yorktown (CV-5) as she appeared during the Battle of Midway. Hanger doors may be depicted in open or closed position. Elevator at the stern may be depicted in up or down position. Comes with parts to depict F4F Wildcats, Douglas SBD-3 Dauntlesses, and Douglas TBD-1 Devastators.

2007 USS Yorktown was completed in September 1937 as the first ship of her namesake-class and the U.S. Navy’s sixth aircraft carrier. When the Pacific War broke out, she became the flagship of Task Force 17 under the command of Rear Admiral Frank J. Fletcher and conducted a number of operations around the Pacific. During the Battle of the Coral Sea in May 1942, she helped thwart the Japanese Navy’s advance on New Guinea despite suffering severe damage. Subsequently, at the Battle of Midway, the Yorktown and her sister ships USS Enterprise and USS Hornet defeated the Japanese Mobile Fleet, but the Yorktown herself suffered severe damage by torpedo and bomb hits from the aircraft of the Japanese carrier Hiryu. She was finally sunk by torpedoes from the Japanese submarine I-168. The Tamiya 1/700 scale model is a precise replica assembly kit of this iconic carrier during WWII.

Šaltinis: U.S. Aircraft Carrier Yorktown on Tamiya

Tęsti svarstymą →

Peržiūrėta : 1490

Japonų sunkusis kreiseris Chikuma – Tamiya 78027

Užregistruota Modifikuota prie | palik atsakymą
Japanese Heavy Cruiser Chikuma - Tamiya 78027

Tamiya

Réf 78027
TipasMaquette
Skalės1/350
Sujetas

Japanese Heavy Cruiser Chikuma

1/350 scale plastic assembly kit of the Chikuma before she was refitted with additional AA guns, radar, and air defense command center. Model may be assembled as a full hull model mounted on a display stand or a waterline model. The use of small screws enables secure attachment of the hull and deck. Highly detailed main gun turrets. Gun barrels articulate in 2 different angles. V-shaped ventilator ducts and funnels included. Mast components are made from ABS plastic for greater durability. Photo-etched parts such as aircraft trolleys, catapult rails, and mast braces included. Anchor chains and propeller shafts are made with metal parts. Floatplanes included and come with display stands. Kit includes a Reference Booklet which provides background information for the Chikuma as well as a full color Painting Guide.

Chikuma was the last heavy cruiser the Imperial Japanese Navy constructed during WWII and was completed in May 1939 as the second ship of the Tone-class. Her four twin 20.3cm guns were located at the bow to enable unhindered operation of up to 6 floatplanes at the stern. Her design also enabled a top speed of 35 knots and a long range. She was assigned to the Carrier Mobile Fleet with her sister ship Tone. During the Pearl Harbor Attack in December 1941, her floatplanes carried out pre-attack reconnaissance over the Pearl Harbor, which greatly contributed to the IJN’s success of the operation. She was also active during the Battle of Midway and the Solomon Islands campaign. During the Battle of the Leyte Gulf in October 1944, she was the flagship of Admiral Kurita’s fleet and contributed to the sinking of the USS Gambier Bay but she was in turn damaged by torpedoes and scuttled off the coast of Samar Island.

Šaltinis: Japanese Heavy Cruiser Chikuma on Tamiya

Tęsti svarstymą →

Views : 2472

Avro Lankasteris B Mk.I – B Mk.III – Tamiya 61111

Užregistruota Modifikuota prie | palik atsakymą
Avro Lankasteris B Mk.I - B Mk.III - Tamiya 61111

Tamiya

Réf 61111
TipasMaquette
Skalės1/48
Sujetas

Avro Lancaster B Mk.III Specialusis "Dambuster" / B Mk.I Specialusis "Grand Slam bombonešis"

Rinkinį sudaro dalys, vaizduojančios Lancaster as either a Mk.I Grand Slam or a Mk.III Dambuster variant. Based on the latest research information, details such as early-type propellers and late-type front canopy have been faithfully depicted. Parts for two Merlin engines are included. Engine nacelles can be depicted in either open or closed state. The gun turrets are all movable. Pre-painted as well as unpainted canopy parts are included. Comes with 3 marking options and 5 crew figures.

2007 Avro Lankasteris buvo vienas iš pagrindinių RAF sunkiųjų bombonešių Antrojo pasaulinio karo metu. Tarp daugelio variantų Mk.III "Dambuster" ir Mk.I "Grand Slam Bomber" buvo geriausiai žinomi ir garsiausi. "Dambuster" buvo modifikuotas, kad atakuotų užtvankas Vokietijoje. Jame buvo įrengtos specialios šokinėjančios bombos, kurios praskrisdavo per vandenį į užtvankos sieną ir sprogdavo po vandens paviršiumi, kad padarytų struktūrinius pažeidimus. "Grand Slam Bomber" buvo sukurtas nešti 10 tonų "Grand Slam" žemės drebėjimo bombą, o jo bombų skyriaus durys ir nugaros kulkosvaidžiai buvo pašalinti, kad būtų sumažintas svoris. Šie "Lancaster's" naudojo "Grand Slam" tokiems svarbiems taikiniams kaip "U-boat" bazės ir raketų gamybos vietos. "Tamiya" modelis ištikimai užfiksuoja visas šio istorinio ir garsaus Antrojo pasaulinio karo orlaivio detales 1/48 mastelio

Šaltinis: Avro Lancaster B Mk.I – B Mk.III on Tamiya

Tęsti svarstymą →

Views : 1592

Ilyushin IL-2 Shturmovik – Tamiya 61113

Užregistruota Modifikuota prie | palik atsakymą
Ilyushin IL-2 Shturmovik - Tamiya 61113

Tamiya

Réf 61113
TipasMaquette
Skalės1/48
Sujetas

Ilyushin IL-2 Shturmovik

Model depicts a late variant of the Ilyushin IL-2 Shturmovik (two-seat cockpit and swept outer wings) 3 kinds of canopies included and each may be depicted in either open or closed position. Highly-detailed cockpit accurately depicts the fuel tank positioned between pilot and gunner. Radiator and oil cooler reproduced accurately. Includes 2 kinds of covers for 23mm cannons. Parts for 100kg and 250kg bombs included. 3 kinds of rocket launcher parts included, Comes with 3 decal marking options.

2007 Ilyushin Il-2 was one of the most significant ground-attack aircraft of WWII. It incorporated a sturdy monocoque construction and excellent armor protection to make it perfect for ground attack operations. It was initially conceived as a two-seat design but due to weight issues it was re-designed as a lighter single-seat aircraft in 1940. As production began in 1941, the aircraft was designated as the Il-2. Heavy losses of the single-seat aircraft during combat forced the addition of a rear gunner position in 1943. Later variants featured improvements such as swept outer wings for better handling. The Il-2 contributed greatly to the eventual Russian victory over Nazi Germany. Joseph Stalin himself famously noted that the aircraft was as vital to the Russian Army as air and bread.

Šaltinis: Ilyushin IL-2 Shturmovik on Tamiya

Tęsti svarstymą →

Views : 1562

Sd.Kfz. 4/1 Panzerwerfer 42 vėlai – Roden 714

Užregistruota Modifikuota prie | palik atsakymą
Sd.Kfz. 4/1 Panzerwerfer 42 vėlai - Roden 714

Rodenas

Nuoroda 714
TipasMaquette
Skalės1/72
Tema

Sd.Kfz. 4/1 Panzerwerfer 42 (late)

Une nouveauté 2012 de la marque Roden la maquette : «Sd.Kfz. 4/1 Panzerwerfer 42 late – Roden 714».

The Panzerwerfer 42 auf Maultier weighed 7.1 tonnes, was six meters long, two meters wide, and nearly three meters high. It was capable of reaching speeds of up to 40 km/h. One of these half tracked vehicles generally carried a Nebelwerfer 42 launching system, which was specially designed to be mounted on the Opel-engine powered Panzerwerfer.

Šaltinis: Sd.Kfz. 4/1 Panzerwerfer 42 on Roden

Tęsti svarstymą →

Peržiūrėta: 1131

Opel Blitz Omnibus W39 – Vėlyvojo Antrojo pasaulinio karo tarnyba – Roden 726

Užregistruota Modifikuota prie | palik atsakymą
"Opel Blitz Omnibus W39" - Antrojo pasaulinio karo pabaigos paslauga - "Roden 726"

Rodenas

Nuoroda 726
TipasMastelio modelis
Skalės1/72
Tema

"Opel Blitz Omnibus W39" (vėlyvojo Antrojo pasaulinio karo paslauga)

Rinkinys iš prekės ženklo Roden rinkinys: «Opel Blitz Omnibus W39 - vėlyvojo Antrojo pasaulinio karo paslauga - Roden 726».

Opel Blitz 3.6-47 tipo W39 Ludewig – Antrojo pasaulinio karo laikotarpio vokiškas personalinis autobusas, suprojektuotas ant gerai žinomo "Opel Blitz" trijų tonų sunkvežimio važiuoklės. Serijinė gamyba truko nuo 1939 iki 1943 m., Ludewig gamykloje Vokietijos mieste Esene. Per šį laiką buvo pagaminta beveik trys tūkstančiai tokio tipo vienetų, kurie buvo naudojami kiekviename karo fronte, kaip pareigūnų ir greitosios pagalbos transportas, taip pat personalo transportas, telefono mainai, radijo stotis ir kt.

Šaltinis: Opel Blitz Omnibus W39 ant Rodeno

Tęsti svarstymą →

Views : 2105

Beechcraft SD17S – Roden 448

Užregistruota Modifikuota prie | palik atsakymą
Roden 448 - Bukas

Rodenas

Réf 448
TipasMaquette
Skalės1/72
Sujetas

Beechcraft SD17S

A kit from the brand Roden kit : «Beechcraft SD17S – Roden 448».

Beechcraft SD17 Staggerwing: American single-engine floatplane converted from the basic model with a standard wheeled undercarriage. The main feature of such a machine was its ability to take off and land on small lakes and reservoirs. The first SD17 appeared in 1934, and afterwards a good number of Staggerwings were converted to floatplanes. With the beginning of WWII, along with other civil machines, they were requisitioned by the government for military needs, and they were used in lakeland areas and also in Alaska, mainly as patrol airplanes. Apart from the USA, Staggerwing floatplanes were used in Canada and Australia. The last machines of this type continued to carry out commercial flights up until the early 1970s.

Šaltinis: Beechcraft SD17S įjungtas Rodenas

Tęsti svarstymą →

Peržiūrėta: 1078

Bussing-Nag 4500 A vėlai – IBG 35013

Užregistruota Modifikuota prie | palik atsakymą
Autobusai-Nag 4500 Vėlai - IBG 35013

IBG modeliai

Réf35013
TipasMaquette
Skalės1/35
Sujetas

Bussing-Nag 4500 A late
Une maquette de la marque IBG modeliai Rinkinys: Bussing-Nag 4500 A late – IBG 35 2007 Bussing-Nag 4500 A était un camion allemand qui a été fabriqué de 1942 à 1945. Ce camion est le successeur du Büssing-NAG type 500A qui en diffère par la conception des moyeux de roues de l’essieu arrière ainsi que diverses simplifications de fabrication.

Šaltinis: Bussing-Nag 4500A on IBG Models

Tęsti svarstymą →

Peržiūrėta: 1506

Autobusai-Nag 4500 S – IBG 35012

Užregistruota Modifikuota prie | palik atsakymą
Autobusai-Nag 4500 S - IBG 35012

IBG modeliai

Réf35012
TipasMaquette
Skalės1/35
Sujetas

Bussing-Nag 4500 S

Une maquette de la marque IBG modeliai Rinkinys: Autobusai-Nag 4500 S – IBG 35012

2007 Bussing-Nag 4500 S était un camion allemand qui a été fabriqué de 1942 à 1945. Ce camion est le successeur du Büssing-NAG type 500S qui s’il n’y ressemble pas extérieurement n’en reprend pas moins une grande partie de sa technologie.

Šaltinis: Bussing-Nag 4500S on IBG Models

Tęsti svarstymą →

Views : 1445