Mortier 220 mm Mle 1916 Schneider

220 mm TR mle 1915/1916

PaysFrance
TypeObusier
En service1916-1945
FabricantSchneider et Cie

Le Mortier de 220 mm Tir Rapide modèle 1915/1916 Schneider ou 220 mm TR mle 1915/1916 était un obusier français conçu et produit pendant la Première Guerre mondiale. Un certain nombre d’entre eux étaient encore disponibles pendant la Seconde Guerre mondiale et ont servi en Belgique, en France et en Allemagne.

Source: 220 mm TR mle 1915/1916 sur Wikipédia

Mortar 220 mm Mle 1916 Schneider Walk Around
PhotographesInconnu
LocalisationInconnu
Photos44
Attendez, je cherche des photos de 220 mm TR mle 1915/1916 pour vous...

Obusier Minairons Miniatures Schneider 155mm - Amazon

Voir aussi :

Seconde Guerre mondiale : l’histoire visuelle définitive de la Blitzkrieg à la bombe atomique (DK Definitive Visual Histories) - Amazon Carte par carte de la Seconde Guerre mondiale (carte par carte de l’histoire du Danemark) - Amazon


General Characteristics (World War I Era)

The Mortier de 220 mm Mle 1916 TR (Tir Rapide – Quick Firing) Schneider was a heavy French mortar/howitzer designed during World War I to provide the trench warfare power needed to destroy strong enemy fortifications. It was an improved version of the earlier Mle 1915, notably featuring stronger wheels with rubber tires for slightly better, though still limited, mobility.

Property Value (Mle 1916 Variant)
Rôle Heavy Siege/Field Mortar (High-Angle Fire)
Designer/Manufacturer Schneider et Cie
Entered Service 1916 (Mle 1915/1916)
Calibre 220 mm (8.66 in)
Barrel Length L/10.6 (approx. 2.33 m)
Weight (Firing Position) ~7,800 kg (~17,200 lb)
Transport Designed to break down into 2 loads for towing

Design and Mechanism

  • Recoil System: Utilized a hydro-pneumatic recoil system in a cradle (sled) that slid back along rails on the carriage.
  • High-Angle Fire: Capable of high elevation (up to +65 degrees), which was critical for dropping heavy shells onto entrenched positions and fortifications.
  • Loading: The gun had to be lowered to a low elevation for loading. To assist the crew with the heavy 100 kg shells, folding rails were often used to slide the projectile into the breech.
  • Breech: Used an interrupted screw breech block with a de Bange obturator seal to allow the use of separate loading bagged propellant charges.
  • Emplacement Time: Required significant site preparation, including digging a pit under the breech for high-angle fire and a minimum of 2 hours to get the gun into battery.

Performance and Usage

  • Projectile Weight: 100.5 kg (221 lb) HE shell.
  • Muzzle Velocity: Up to 415 m/s (1,360 ft/s) depending on the propellant charge.
  • Maximum Range: Approximately 10,800 m (10.8 km, 6.7 miles).
  • Rate of Fire: Relatively slow, around 2 rounds per minute (6 rounds per 5 minutes).
  • Mobility Issue: Despite the « TR » (Quick Firing) designation, the guns heavy weight and limitations on its carriage meant its towing speed was very slow, a major deficiency once the Western Front became mobile near the end of WWI.
  • Later Service: Many of these mortars were still in French service at the start of World War II, and a large number were captured by Germany and pressed into service as the 22 cm Mörser 531(f).

Views : 504

Ecrire un commentaire

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong> 

requis

Ce site utilise Akismet pour réduire les indésirables. En savoir plus sur comment les données de vos commentaires sont utilisées.