Paolo Fanin

Heavy Tank M6

RolliRaske paak
ToodetudTeise maailmasõja periood
Ehitatud40 (prototüübid)

2007 Raske tank M6 oli Teise maailmasõja ajal konstrueeritud Ameerika ühendriikide rasketank. Tank toodeti väikestes kogustes ja ei näinud kunagi võitlust.

Allikas: Rasketanki M6 Vikipeedias

M6 Heavy Tank Walk Around
FotograafidPaolo Fanin
Oota, otsides rasket tanki M6 teie jaoks ...

Seotud komplektid:

Leia komplektid eBayst:

Otsi eBayst
Otsige, mida vajate, soovitame seda, kuid teie otsustate

The Heavy Tank M6 was an American heavy tank designed during World War II. The tank was produced in small numbers and never saw combat. The tank was originally conceived as a multi-turreted vehicle with a 75 mm main gun and several secondary weapons, but this design was abandoned in favor of a single-turret model with a 3-inch gun and a coaxial 37 mm gun. The tank had a cast or welded hull, depending on the variant, and a vertical volute spring suspension with four bogies per side.
The tank weighed over 50 tons and was powered by a Wright G-200 radial gasoline engine coupled with a torque converter or an electric transmission. The tank had thick armor ranging from 25 to 83 mm, but it was also slow and cumbersome. The tank faced many technical problems during development and testing, and was rejected by the US Army Armored Force as unsuitable for modern warfare. Only 40 tanks were built, most of which were used for training purposes or scrapped after the war.

Vaatamisi: 761

Kommentaarid on suletud.