Curtiss P-40 Warhawk

Curtiss P-40 Warhawk

RiikUSA
RolliHävitus- ja maapealse rünnaku õhusõidukid
Esimene lend14. oktoober 1938
Ehitatud13738

2007 Curtiss P-40 Warhawk oli Ameerika ühemootoriline, ühekohaline, metallist hävitus- ja maapealne ründelennuk, mis lendas esmakordselt 1938. aastal. P-40 disain oli eelmise Curtiss P-36 Hawki modifikatsioon, mis vähendas arendusaega ja võimaldas kiiret tootmis- ja operatiivteenistusse sisenemist. Warhawki kasutasid 28 riigi õhujõud, sealhulgas enamiku liitlasriikide õhujõud Teise maailmasõja ajal, ja jäid rindeteenistusse kuni sõja lõpuni. See oli P-51 ja P-47 järel kolmas enim toodetud Ameerika hävitaja; 1944. aasta novembriks, kui P-40 tootmine lõpetati, oli ehitatud 13 738, kõik Curtiss-Wright Corporationi peamistes tootmisrajatistes Buffalos, New Yorgis.

Allikas: Curtiss P-40 Warhawk Vikipeedias

Jätka lugemist

Views : 15637

F-22 Raptor USAF - Hasegawa 7245

Hasegawa

Ref 7245
TüüpÜheistmelised hävituslennukid
Skaala1/35
Teema

F-22 Raptor USAF

Brändi uudised 2012 Hasegawa komplekt : «Nakajima KI42-I Hayabusa 64th Limited Edition – Hasegawa 07303».

Hasegawa on täpselt jäljendanud Lockheed Martin/Boeing F-22 Raptorit, viienda põlvkonna kaasaegset üheistmelist hävituslennukit, mis kasutab varjatud tehnoloogiat. Esimest korda USA õhujõudude inventuuris 2005. F-22 on eelkõige õhuüleoleku võitleja , kuigi tal on ka võime viia läbi maapealseid rünnakuid, elektroonilist sõjapidamist ja anda märku luureoperatsioonidest. Iga Hasegawa toodetud plastmudeli komplekt on väga oodatud ja 1/48 F-22 Raptor ei ole erand. Lockheed-Martini ametlikult litsentseeritud, see jäädvustab täissuuruses reaktiivhävitaja hirmutava profiili, millel on palju skaala üksikasju, mille poolest Hasegawa on tuntud.

Allikas: F-22 Raptor USAF HasegawaUsa'l

Jätka lugemist

Vaatamisi : 1270

Sd.Kfz.261 Kleine Panzerfunkwagen - DML 7447

Dragon Model

Ref 7447
TüüpMudelikomplekt
Skaala1/35
Teema

Sd.Kfz.261 Kleine Panzerfunkwagen

Brändi uus mudel Draakoni mudel komplekt : Sd.Kfz.261 Kleine Panzerfunkwagen – DML 7447

Funktsioonid : -Intricate Sd.Kfz.261 newly produced -Preformed frame and mast antennas -Tow hook molded on both front and rear of the vehicle -Finely molded one-piece hull w/fine detail -Intricate external stowage included -Chassis presented in full detail -Delicate wheels w/authentic tire tread pattern -Hull-top cover assembled from separate parts -Spare wheels included -Finely molded jerry can included

Dragon has been constantly expanding its popular 1/72 scale range of model Leichter Panzerspahwagen light reconnaissance vehicles. An Sd.Kfz.260 was released a short time ago, and now Dragon is offering yet another interesting variant. This time it is an Sd.Kfz.261. The Sd.Kfz.260 and 261 were similar in that they were both designed for signals units, with a total of 493 produced from November 1940 through till April 1943. They were designed specifically as armored (but unarmed) radio communication vehicles. The Sd.Kfz.261 was fitted with a FuG.12 long-range radio set connected to a frame antenna and also a telescopic antenna. In due course the Sd.Kfz.260/261 family was replaced by halftrack radio vehicles. Dragon’s 1/72 scale model makes use of the newly tooled Sd.Kfz.260. It has brand new parts such as the frame antenna and the exquisitely produced telescopic antenna mounted on the left side of the hull. These radio components provide the Sd.Kfz.261 with a unique silhouette and cause it to really stand out from other members of the Leichter Panzerspahwagen family. The hull-top opening is made of plastic, this material being much easier to work with than photo-etched parts. After painting in appropriate colors, modelers can apply Cartograf high-quality decals to finish off their distinctive-looking Sd.Kfz.261!

Allikas: DML 7447 on Dragon Models

Vaadatud: 924

BMD-1 - Ace Models 72114

Ace mudelid

Ref 72114
TüüpMudelikomplekt
Skaala1/72
Teema

BMD-1 – Ace Models 72114

Brändi mudel Ace mudelid komplekt: BMD-1 – Ace Models 72114.

BMD-1. -Boevaya Mashina Desanta ( Airborne Combat Vehicle) – was designed as an airborne counterpart of the army’s best armored infantry vehicle, the BMP-1. Both vehicles shared the same armament system: a single-man turret with a 73mm Grom low-pressure gun and a launcher for 9M14M Maliutka anti-tank missile. Because the BMD was designed for airborne drop, it’s size and weight had to be considerably trimmed – combat loaded weight under 7 tons (over 13 for BMP).

Jätka lugemist

Vaadatud : 920

Hobuvanker (tüüp 36) koos Zwillingslafette 36-ga - Ace'i mudelid 72510

Ace mudelid

Ref 72510
TüüpMudelikomplekt
Skaala1/72
Teema

Horse drawn wagon (Type 36) with Zwillingslafette 36

Brändi mudel Ace mudelid komplekt: Horse drawn wagon (Type 36) with Zwillingslafette 36 – Ace Models 72510.

If. 5 horse drawn wagon (Type 36) with Zwillingslafette 36. During Civil War in Spain Germans found that aircraft support became very important in a modern war and, from the other side, every infantry formation needs active defenses from enemy aviation. The Zwillingslafette 36 was in the early war time mostly wagon mounted and used as an air defense weapon for infantry units on the march. The wagon used was the so called Einachshänger – the If. 5 MG wagon. It was a small trailer used for that specific purpose. It could be either horse drawn or drawn by a small truck. The wagon could be braced by jacks when used in a static air defense role or mounted on the bed of small trucks or on cars.

Jätka lugemist

Vaadatud : 1244

S-400 Triumf SAM

S-400 Triumf SAM

RiikVenemaa
Tüüp

Missile anti-aircraft

Kirjeldus

Album 17 fotod S-400 Triumf SAM

2007 S-400 Triumf is a new generation anti-aircraft weapon system developed by Russia’s Almaz Central Design Bureau as an upgrade of the S-300 family. It is currently in limited service with the Russian Armed Forces. The S-400’s NATO reporting name is SA-21 Growler, and the system was previously known as S-300PMU-3. Its range is at least twice that of the MIM-104 Patriot. The S-400 uses 3 different missiles to cover its entire performance envelope. These are the extremely long range 40N6, long range 48N6 and medium range 9M96 missile. Each one has different capabilities.

Allikas: S400 on Wiki

Jätka lugemist

Views : 2430

Vene BTR-60PB UPGRADED - Trompet 01545

Trumpeter

Ref 01545
TüüpMudelikomplekt
Skaala1/35
Teema

Russian BTR-60PB UPGRADED

Brändi mudel Trumpeter komplekt: Russian BTR-60PB UPGRADED – Trumpeter 01545.

Features : The kit consists of over 570 parts -the kit w/refined detail -multi-slide moulded lower hull , upper hull -main tires are hollow rubber with very good tread pattern -Photo-etched fret included

The BTR-60 is the first vehicle in a series of Soviet eight-wheeled armoured personnel carriers. It was developed in the late 1950s as a replacement for the BTR-152 and was seen first time in public in 1961. An order to enter the BTR-60P into Soviet Army service was issued on 13 December 1959. However production started in 1960. First BTR-60Ps were delivered in 1960. It first entered service with the Soviet Army and later the Soviet naval infantry. In early 1960s it replaced the BTR-152 in the role of the basic APC. BTR-60P was first seen by the West in 1961. BTR-60PA entered service with the Soviet Army in 1963 , BTR-60PB did in 1966. As the newer models of BTR-60 appeared the older ones were gradually withdrawn from front-line service. A number of old BTR-60Ps were converted into repair vehicles.

Allikas: Russian BTR-60PB by Trumpeter

Jätka lugemist

Vaadatud : 1026

Leichte (Funk) Pz.Kpfw.I Ausf.A - DML 6591

Dragon Model

Ref6591
Teema1/35 Sõjavägi
Skaala1/35
Teema

Valgus (raadio) Pz.Kpfw.I Ausf.A

Brändi mudel Draakoni mudel komplekt : Leichte (Funk) Pz.Kpfw.I Ausf.A - DML 6591

Funktsioonid: -Newly tooled Leichte (Funk) Pz.IA w/authentic details -Newly tooled antenna guard and mount -Newly tooled upper superstructure made by 3-directional slide mold -New fighting compartment w/interior details -Upper superstructure hatch can be assembled open/closed -Authentic-looking photo-etched rain guard -Visors can be shown open/closed -Rod antenna can be modeled at desired angle -Air intake cover can be optional assembled on hull rear -Engine deck represents Pz.Kpfw.I Ausf.A -Interior details including gas mask canisters, radio set, battery boxes and seats -Authentic radio equipment bundled w/photo-etched headset -Upper hull in great details -Multi-directional slide-molded rear engine deck modeled in extreme details -Engine deck hatches can be assembled open/closed -Glacis plate represents Leichte (Funk) Pz.IA -Photo-etched exhaust cover -Accurate rear-panel configuration -Detailed tread pattern molded on top of the side fenders -Lower hull formed from multiple parts for greater details -Suspension assembles recreated in fine details -Driver’s vision port covers can be assembled open/closed -Idler wheel assembles recreated in fine detail -Road wheels w/photo-etched rings -Sprocket and idler reproduced in great detail -Intricate OVM arrangement -Horn and ventilator duct included in fine detail -Magic Tracks are accurately reproduced

Allikas: Pz.Kpfw.I Ausf.A draakonimudelitel

Jätka lugemist

Vaatamisi: 1117