SdKfz.000 - Lehekülg 186

Peenvormid FM24 - IJA tankihävitaja tüüp 2 HO-I

Peened vormid
Sujet	IJA Tank Destroyer Type 2 HO-I
Skaala	1/35
Ref	FM24

Brändi mudel Peened vormid komplekt IJA Tank Destroyer Type 2 HO-I – Fine Molds FM24

One of the combat vehicle of the Japanese Army during World War II, the military has been adopted as a vehicle to be able to fight enemy tanks using the “bullets” for anti-tank forming explosive bullet. Its structure is the chassis of the tank in, equipped with a tank gun (7.5cm) of remodeling Sanpo ninety-nine half centimeter Equation 7. Both about 30 troops have been deployed to Japan to enter mass production in the mainland since 1944.

Jätka lugemist →

Vaadatud : 1165

IJA peamine lahingutanki tüüp 97 CHI-HA - peened vormid FM25

Peened vormid
Sujet	IJA peamine lahingutanki tüüp 97 CHI-HA
Skaala	1/35
Ref	FM25

Brändi mudel Peened vormid komplekt IJA Main Battle Tank Type 97 CHI-HA – Fine Molds FM25

Until the end of the war from the start of production in 1938, became the core tank in the tank unit of Japan is “Chiha” Type 97 medium tank. 57 mm tank gun with a suitable support such as infantry, was equipped with an air-cooled diesel engine operation easy even in cold climates. Been changed in the armor so as to cover part of the engine exhaust heat from the late side of the rear chassis production, production has been a considerable number.

Jätka lugemist →

Vaadatud : 2150

IJA peamine lahingutanki tüüp 97 SHINHOTO CHI-HA varajane kere - peened vormid FM26

Peened vormid
Sujet	IJA Main Battle Tank Type 97 SHINHOTO CHI-HA Early Hull
Skaala	1/35
Ref	FM26

Brändi mudel Peened vormid komplekt IJA Main Battle Tank Type 97 SHINHOTO CHI-HA Early Hull – Fine Molds FM26

It was active in the core and tank forces in the Japanese Type 97 tank is [Chiha]. Initially the car this had been primarily intended to support infantry, from the 1942 production to prepare for turret a large antitank gun 47mm with improved capacity tank of [Chiha turret new] will be initiated. Was shifted to one side of the car to change the shape of the second half of the body which contains the engine, engine cooling efficiency and improved elasticity of Thailand, transitional vehicle chassis includes a new turret also conventional was seen.

Jätka lugemist →

Vaadatud : 1632

IJA peamine lahingutanki tüüp 97 CHI-HA - peened vormid FM27

Peened vormid
Sujet	IJA peamine lahingutanki tüüp 97 CHI-HA
Skaala	1/35
Ref	FM27

Brändi mudel Peened vormid komplekt IJA Main Battle Tank Type 97 CHI-HA – Fine Molds FM27

It was active in the core and tank forces in the Japanese Type 97 tank is Chiha. Initially the car this had been primarily intended to support infantry, from the 1942 production to prepare for turret a large antitank gun 47mm with improved capacity tank of Chiha turret new will be initiated. Was shifted to one side of the car to change the shape of the second half of the body which contains the engine, engine cooling efficiency and improved elasticity of Thailand, transitional vehicle chassis includes a new turret also conventional was seen.

Jätka lugemist →

Vaadatud : 3505

IJA keskmise paagi tüüp 5 CHI-RI - peened vormid FM28

Peened vormid
Sujet	IJA Medium Tank Type 5 CHI-RI
Skaala	1/35
Ref	FM28

Brändi mudel Peened vormid komplekt IJA Medium Tank Type 5 CHI-RI – Fine Molds FM28

In the Imperial Army, became the last tank in the order of five tanks in the formula developed is [Chile]. And the length of the barrel 75mm cannon main gun with automatic loading system, was installed in the vehicle body front 37mm cannon as secondary weapon. Will be scaled up significantly compared with the tanks of the Imperial Army until it is thick front armor 75mm, 35t weight and has been developed to become a tank of the latest and strongest pure Japanese style. There is a document description is made only a single prototype vehicle in March 1945, tests were carried out with the fire-traveling. At the war’s end the occupation forces have been requisitioned to remove the gun in the state.

Jätka lugemist →

IJA keskmise paagi tüüp 3 CHI-NU pika barreliga versioon - peenvormid FM29

Peened vormid
Sujet	IJA keskmine tank tüüp 3 CHI-NU pikaraudne versioon
Skaala	1/35
Ref	FM29

Brändi mudel Peened vormid komplekt IJA Medium Tank Type 3 CHI-NU Long-Barreled version – Fine Molds FM29

Vormel 3-s on toodetud alates 1944. aasta lõpust tanki [musta mere latikas], kuid see oli varustatud tankikahuriga, suunati välikahurist suurtüki vastu ja soodsad tingimused ei kehti M4 Shermani tankide jaoks, mida liitlasvägede tugisammas tegi. Plaan on kavas varustada tanki kahuriga (= 75mm pool 7 cm) pool sentimeetrit seitse vormel viis võimas, renoveerimist suurtüki vanker on uuritud, et võidelda eeliseks Hosen kauguses rohkem selle eest.

Jätka lugemist →

Peened vormid
Sujet	IJA Type 94 6-Wheeled Truck Hard Top
Skaala	1/35
Ref	FM30

Brändi mudel Peened vormid komplekt IJA Type 94 6-Wheeled Truck Hard Top – Fine Molds FM30

Selle auto väljatöötamine 1933. aastal, autokool, et armeel paluti hakata tootma / projekteerima kuuerattaline veoauto ainult sõjaline koostöö mõlema ettevõtte Industry Co., Ltd., elekter (gaas) Tokyogasu Automotive Industry Co., Ltd. ja. Pikka aega kasutati autona kuni sõja lõpuni pärast erinevate erirakenduste puhkemist ka Shina Jihen, kaubaveovahend rindevägedena. Osade standardiseerimine ja tolleaegse kaubandus- ja tööstusministeeriumi kasutamine määrati "standardvormiga auto" ja kodumaine auto tol ajal väidetavalt kehv jõudlus on selge erinevus, saavutati vägede usaldus tugeva ja kõrge jõudluse vastu.

Jätka lugemist →

Fine Molds FM31 - IJA Type 94 6-Wheeled Truck Canvas Top

Peened vormid
Sujet	IJA Type 94 6-Wheeled Truck Canvas Top
Skaala	1/35
Ref	FM31

Brändi mudel Peened vormid komplekt IJA Type 94 6-Wheeled Truck Canvas Top – Fine Molds FM31

Jätka lugemist →

Saksa Panzerkampfwagen IV Ausf B - TRISTAR 35021

Tristar
Teema	German Panzerkampfwagen IV Ausf B
Skaala	1/35
Ref	35021

Brändi mudel Tristar the kit German Panzerkampfwagen IV Ausf B – TRISTAR 35021

2007 Panzerkampfwagen IV (Pz.Kpfw. IV) commonly known as the Panzer IV was a medium tank developed in Nazi Germany in the late 1930s and used extensively during the Second World War. Its ordnance inventory designation was Sd.Kfz. 161.

Jätka lugemist →

Vaadatud : 2433

Saksa Panzer Kpfw.38(t) Ausf.G - TRISTAR 35022

Tristar
Sujet	Panzer Kpfw.38(t) Ausf.G / Panzerbefehlswagen Pz. BfWg 38(t) Ausf.G
Skaala	1/35
Ref	35022

Brändi mudel Tristar the kit German Panzer Kpfw.38(t) Ausf.G / Panzerbefehlswagen Pz. BfWg 38(t) Ausf.G – TRISTAR 35022

Pz.Bfwg.38(t) käsupaak oli standardne Kpfw.38(t) paak, millele oli lisatud Fu kaheksa raadiot (0,83 Mhz, vahemik 80 km), mis oli paigaldatud vöörikuulipilduja piirkonda raamiantenniga taga asuva mootoriruumi kohale.

Jätka lugemist →

Vaadatud : 1312

Autori arhiiv: SdKfz.000

IJA tankihävitaja tüüp 2 HO-I - peenvormid FM24

Peened vormid

IJA Tank Destroyer Type 2 HO-I

IJA peamine lahingutanki tüüp 97 CHI-HA - peened vormid FM25

Peened vormid

IJA peamine lahingutanki tüüp 97 CHI-HA

IJA peamine lahingutanki tüüp 97 SHINHOTO CHI-HA varajane kere - peened vormid FM26

Peened vormid

IJA Main Battle Tank Type 97 SHINHOTO CHI-HA Early Hull

IJA pealahingu tank tüüp 97 CHI-HA – peened vormid FM27

Peened vormid

IJA peamine lahingutanki tüüp 97 CHI-HA

IJA keskmine paak tüüp 5 CHI-RI - peened vormid FM28

Peened vormid

IJA Medium Tank Type 5 CHI-RI

3 IJA keskmise paagi tüüp CHI-NU pika tünniga versioon - peened vormid FM29

Peened vormid

IJA keskmine tank tüüp 3 CHI-NU pikaraudne versioon

IJA Type 94 6-rattaline veoauto kõva ülaosa – peened vormid FM30

Peened vormid

IJA Type 94 6-Wheeled Truck Hard Top

IJA Type 94 6-rattaline veoauto lõuend top – peenvormid FM31

Peened vormid

IJA Type 94 6-Wheeled Truck Canvas Top

Saksa Panzerkampfwagen IV Ausf B – TRISTAR 35021

Tristar

German Panzerkampfwagen IV Ausf B

Saksa Panzer Kpfw.38(t) Ausf.G – TRISTAR 35022

Tristar

Panzer Kpfw.38(t) Ausf.G / Panzerbefehlswagen Pz. BfWg 38(t) Ausf.G