SdKfz.000 - Page 178 - NET-MAQUETTES

C-17A Globemaster III
Country	USA
Role	Military transport aircraft
First flight	15 September 1991
Built	279

Photo gallery of a C-17A Globemaster III, The Boeing C-17 Globemaster III is a large military transport aircraft. It was developed for the United States Air Force (USAF) from the 1980s to the early 1990s by McDonnell Douglas; the company later merged with Boeing. The C-17 is used for rapid strategic airlift of troops and cargo to main operating bases or forward operating bases throughout the world. It can also perform tactical airlift, medical evacuation and airdrop missions. The C-17 carries the name of two previous, but unrelated piston-engine, U.S. military cargo aircraft, the Douglas C-74 Globemaster and the Douglas C-124 Globemaster II.

Source: C-17A Globemaster III on Wikipedia

Continue reading →

Revell
Ref	03093
Type	Model
Scale	1/35
Topic	GTK Boxer (GTFz)

A model of the brand Revell the kit: GTK Boxer (GTFz) – Revell 03093.

The 2011 Boxer is a motorized armored transport vehicle that outshines all others in its class. The modular Boxer can carry up to eight fully equipped troops. Armament is provided by the FLW 200 weapons platform. Kit is modeled in the “driving” position. Features include detailed and finely engraved surface areas, a detailed chassis, realistic module construction, a movable FLW 200 weapons platform with optional 12.7 mm machine guns and a 40 mm machine grenade launcher, a smoke discharge unit, a movable driver’s hatch, rubber tires and four decal options.

Source: GTK Boxer on Revell

Continue reading →

CMK
Ref	HB045
Topic	Military Models
Scale	1/35
Subject	45 mm 20 K model 1934 gun with mantlet – Gun for T-35 A

A model of the brand CMK the kit : 45 mm 20 K model 1934 gun with mantlet – Gun for T-35 A – CMK HB045

Source: CMK HB045 on CMK

Continue reading →

Dragon Models
Ref	6550
Topic	Military Models
Scale	1/35
Subject	3.7cm FlaK 43 Flakpanzer IV “Ostwind”

A model of the brand Dragon Model the kit : 3.7cm FlaK 43 Flakpanzer IV Ostwind – DML 6550

Features: -Newly tooled photo-etched parts on turret -Slide-molded one-piece gun barrel w/hollow muzzle -Hatches on radio operator’s housing can be assembled open/closed -Newly tooled 2-directional slide-molded turret for Ostwind -New scale-thickness fighting compartment armor has extra-thin top edge -Turret w/realistic weld seams -Gun-sight cover can be assembled open/closed -Great detail on newly tooled hull rear -Newly tooled spare barrel case included -One-piece upper hull -2-directional slide-molded w/new engine -deck design -Turret ring accurately produced -Delicate gun mounting platform -Spare-track brackets on glacis plate w/photo-etched and plastic options -Interior and fuel tank parts for Pz.IV -Hull reproduced w/internal detail -Spare-track brackets on front of lower hull -Photo-etched parts for engine-deck ventilation grill -Engine hatches can be assembled open/closed -Injection-molded fenders made to thinnest possible dimensions -Side fenders w/pattern detail on both top and bottom surfaces -40cm Magic Tracks are detailed on both sides -One-piece lower hull made from slide-molds -Hull bottom fully detailed -Injection-molded OVM w/clasps -Extendable jack w/separate parts -Accurately detailed idler adjuster mountings -Road wheels and suspension w/multiple components exhibit crisp detail -Complete MG w/workable ball mount -Return rollers realistically reproduced -Idler wheels have detail parts -Final-drive housing w/details on both sides -Separate armored cover for final-drive housing -Sprocket wheels w/breathtaking detail and multiple delicate parts

Source: DML 6550 on Dragon Models

Continue reading →

Cyber-Hobby
Ref	5104
Type	Model kit
Scale	1/48
Topic	Sea King AEW.2 Falklands War

A model of the brand Cyber-Hobby the kit : Sea King AEW.2 Falklands War – Cyber-Hobby 5104.

Contents: 5-blade tail rotor realistically produced New Sea King AEW.2 rendered w/stunning detail Windshield wipers molded on cockpit Cockpit glazing made from crystal-clear parts Detailed landing gear and buoyancy sponsons Radome for Searchwater radar attached to the fuselage on a swivel arm Details and fittings molded on belly of Sea King AEW.2 fuselage Authentic rotor w/intricate detail Realistic pilot’s seats included Slightly curved rotor blades reproduced Realistic steps included One-piece fuselage reproduced w/intricate details Strengthened landing gear realistically portrayed

This year marks the anniversary of the Falklands War that occurred 30 years ago in 1982, and Cyber Hobby is commemorating the historic event with a second 1/72 scale kit of the Sea King helicopter. Modelers enthusiastically received the brand new Westland WS-61 Sea King HC.4 troop-carrying variant, and that Cyber-Hobby item proved an instant hit. This second kit depicts the rare airborne early warning AEW.2 helicopter. Combat in the Falklands War revealed an AEW gap in the capability of the Royal Navy (RN), and even while the conflict was under way, Westland began converting two Sea King HAS.2 helicopters in May 1982. After the crash development program, these two helicopters joined the replacement task force when it set sail in August although they were too late to participate in the actual fighting. The AEW.2s featured a Thorn-EMI ARI 5930/3 Searchwater radar mounted in an inflatable radome fitted to a swivel arm.

Source: Sea King AEW.2 on Cybber-Hobby

Continue reading →

Eduard
Ref	8057
Type	Military Model
Scale	1/48
Subject	Sopwith F.1 Camel RFC

A model of the brand Eduard the kit: Sopwith F.1 Camel RFC – Eduard 8057.

The Sopwith Camel was a British First World War single-seat biplane fighter introduced on the Western Front in 1917

Continue reading →

Eduard
Ref	17030
Type	Military Model
Scale	1/700
Subject	Prinz Eugen 1945 Photoetched set

A model of the brand Eduard the kit: Prinz Eugen 1945 Photoetched set – Eduard 17030.

Recommended for kit: TRUMPETER Prinz Eugen was an Admiral Hipper-class heavy cruiser, the third member of the class of five vessels. She served with the German Kriegsmarine during World War II. The ship was laid down in April 1936 and launched August 1938; Prinz Eugen entered service after the outbreak of war, in August 1940. The ship was named after Prince Eugene of Savoy, an 18th century Austrian general.

Source: Prinz Eugen 1945 Photoetched set on Eduard

Continue reading →

Eduard
Ref	36215
Type	Military Model
Scale	1/35
Subject	Boxer MRAV Photoetched set

A model of the brand Eduard the kit: Boxer MRAV Photoetched set – Eduard 36215.

Recommended for kit: HOBBY BOSS The Boxer is a German-Dutch multirole armoured fighting vehicle designed to accomplish a number of operations through the use of installable mission modules

Source: Boxer MRAV Photoetched set on Eduard

Continue reading →

Eduard
Ref	36208
Type	Military Model
Scale	1/35
Subject	GMC Bofors 40mm Photoetched set

A model of the brand Eduard the kit: GMC Bofors 40mm Photoetched set – Eduard 36208.

Recommended for kit: HOBBY BOSS The U.S. military decided to ask various companies to create a troops transport vehicle quickly available and convenient. In 1941, the GMC firm won and the production began. . The qualities of this vehicle were numerous: the use of a tarp to cover the cabin provided a real economy, compared to the use of sheet metal. Easily deployable, the GMC CCKW 353 could serve both as a troops transport vehicle, so as a medical evacuation vehicle, food and ammunition resupply vehicle. Sold around the world after the Second World War, the vehicle remained in service in many armies，some of the vehicles equip with the 40mm BOFORS,and working in france.

Continue reading →

Eduard
Ref	1170
Type	Military Model
Scale	1/48
Topic	P-38J over Europe Limited Edition

A model of the brand Eduard the kit: P-38J over Europe Limited Edition – Eduard 1170.

Limited edition of the P-38J Lightning in the 1/48 scale is based on Academy plastic parts. The increasing value of that kit is made by the Eduard additional detailing sets (exclusively included in this kit only). The Eduard Brassin accessories covers the cockpit (pilot’s compartment bay, pilot’s seat, armor plate behind the seat, center wing section, radio equipment), the superchargers (the entire supercharger, plus the supercharger intakes located on the engine sides) and landing gear wheels (including the front wheel, with superb details on their discs, also as the fine tire pattern). The photoetched accessories (colored) contains the instrument panel and seatbelts, air intake strainers and structure of the coolers intakes, landing gear interior and various exterior details. The decal sheet, designed by Eduard and printed by Cartograf features six colorful and attractive markings for Lightnings serving with various USAAF units in the ETO