Boeing CC-177 Globemaster III

C-17A Globemaster III

KrajuStany Zjednoczone Ameryki
RoliWojskowe samoloty transportowe
Pierwszy lot15 September 1991
Zbudowany279

Photo gallery of a C-17A Globemaster III, The Boeing C-17 Globemaster III is a large military transport aircraft. It was developed for the United States Air Force (USAF) from the 1980s to the early 1990s by McDonnell Douglas; the company later merged with Boeing. The C-17 is used for rapid strategic airlift of troops and cargo to main operating bases or forward operating bases throughout the world. It can also perform tactical airlift, medical evacuation and airdrop missions. The C-17 carries the name of two previous, but unrelated piston-engine, U.S. military cargo aircraft, the Douglas C-74 Globemaster and the Douglas C-124 Globemaster II.

Źródła: C-17A Globemaster III na Wikipedii

Czytaj dalej

Liczba wyświetleń : 2295

GTK Boxer (GTFz) - Revell 03093

Revell

Ref 03093
TypuModelu
Skali1/35
Temat

GTK Boxer (GTFz)

Model marki Revell zestaw: GTK Boxer (GTFz) – Revell 03093.

Boxer 2011 to zmotoryzowany opancerzony pojazd transportowy, który przyćmiewa wszystkie inne w swojej klasie. Modułowy Boxer może przewozić do ośmiu w pełni wyposażonych żołnierzy. Uzbrojenie zapewnia platforma uzbrojenia FLW 200. Zestaw modelowany jest w pozycji "za kierownicą". Wyposażenie obejmuje szczegółowe i precyzyjnie wygrawerowane powierzchnie, szczegółowe podwozie, realistyczną konstrukcję modułu, ruchomą platformę uzbrojenia FLW 200 z opcjonalnymi karabinami maszynowymi 12,7 mm i granatnikiem maszynowym 40 mm, wyrzutnię dymu, ruchomą klapę kierowcy, gumowe opony i cztery opcje kalkomanii.

Źródła: GTK Boxer na Revell

Czytaj dalej

Liczba wyświetleń : 1819

43 Flakpanzer IV Ostwind 3,7cm - DML 6550

Modele smoków

Ref6550
TematModele wojskowe
Skali1/35
Temat

3,7 cm 43 Flakpanzer IV "Ostwind"

Model marki Model smoka zestaw: 3.7cm 43 Flakpanzer IV Ostwind – DML 6550

Funkcje: -Newly tooled photo-etched parts on turret -Slide-molded one-piece gun barrel w/hollow muzzle -Hatches on radio operator’s housing can be assembled open/closed -Newly tooled 2-directional slide-molded turret for Ostwind -New scale-thickness fighting compartment armor has extra-thin top edge -Turret w/realistic weld seams -Gun-sight cover can be assembled open/closed -Great detail on newly tooled hull rear -Newly tooled spare barrel case included -One-piece upper hull -2-directional slide-molded w/new engine -deck design -Turret ring accurately produced -Delicate gun mounting platform -Spare-track brackets on glacis plate w/photo-etched and plastic options -Interior and fuel tank parts for Pz.IV -Hull reproduced w/internal detail -Spare-track brackets on front of lower hull -Photo-etched parts for engine-deck ventilation grill -Engine hatches can be assembled open/closed -Injection-molded fenders made to thinnest possible dimensions -Side fenders w/pattern detail on both top and bottom surfaces -40cm Magic Tracks are detailed on both sides -One-piece lower hull made from slide-molds -Hull bottom fully detailed -Injection-molded OVM w/clasps -Extendable jack w/separate parts -Accurately detailed idler adjuster mountings -Road wheels and suspension w/multiple components exhibit crisp detail -Complete MG w/workable ball mount -Return rollers realistically reproduced -Idler wheels have detail parts -Final-drive housing w/details on both sides -Separate armored cover for final-drive housing -Sprocket wheels w/breathtaking detail and multiple delicate parts

Źródła: DML 6550 w modelach Dragon

Czytaj dalej

Liczba wyświetleń : 1546

Sea King AEW.2 Wojna o Falklandy - Cyber-Hobby 5104

Cyber-Hobby

Ref5104
TypuZestaw modeli
Skali1/48
Temat

Sea King AEW.2 Falklands War

Model marki Cyber-Hobby zestaw: Sea King AEW.2 Falklands War – Cyber-Hobby 5104.

Treść: 5-blade tail rotor realistically produced New Sea King AEW.2 rendered w/stunning detail Windshield wipers molded on cockpit Cockpit glazing made from crystal-clear parts Detailed landing gear and buoyancy sponsons Radome for Searchwater radar attached to the fuselage on a swivel arm Details and fittings molded on belly of Sea King AEW.2 fuselage Authentic rotor w/intricate detail Realistic pilot’s seats included Slightly curved rotor blades reproduced Realistic steps included One-piece fuselage reproduced w/intricate details Strengthened landing gear realistically portrayed

W tym roku przypada rocznica wojny o Falklandy, która miała miejsce 30 lat temu w 1982 roku, a Cyber Hobby upamiętnia to historyczne wydarzenie drugim zestawem śmigłowca Sea King w skali 1/72. Modelarze entuzjastycznie przyjęli zupełnie nowy wariant Westland WS-61 Sea King HC.4, a ten przedmiot Cyber-Hobby okazał się natychmiastowym hitem. Ten drugi zestaw przedstawia rzadki powietrzny śmigłowiec wczesnego ostrzegania AEW.2. Walki w wojnie o Falklandy ujawniły lukę AEW w możliwościach Royal Navy (RN), a nawet gdy konflikt był w toku, Westland rozpoczął przebudowę dwóch śmigłowców Sea King HAS.2 w maju 1982 roku. Po programie rozwoju katastrofy te dwa śmigłowce dołączyły do zastępczej grupy zadaniowej, gdy wypłynęła w sierpniu, chociaż było już za późno, aby wziąć udział w rzeczywistych walkach. AEW.2 były wyposażone w radar Thorn-EMI ARI 5930/3 Searchwater zamontowany w nadmuchiwanym radome przymocowanym do obrotowego ramienia.

Źródła: Sea King AEW.2 na Cybber-Hobby

Czytaj dalej

Liczba wyświetleń : 1485

Prinz Eugen 1945 Zestaw fototrawiony - Eduard 17030

Eduard

Ref 17030
TypuModel wojskowy
Skali1/700
Temat

Prinz Eugen 1945 Blaszki fototrawione

Model marki Eduard zestaw: Prinz Eugen 1945 Photoetched set – Eduard 17030.

Recommended for kit: TRUMPETER Prinz Eugen was an Admiral Hipper-class heavy cruiser, the third member of the class of five vessels. She served with the German Kriegsmarine during World War II. The ship was laid down in April 1936 and launched August 1938; Prinz Eugen entered service after the outbreak of war, in August 1940. The ship was named after Prince Eugene of Savoy, an 18th century Austrian general.

Źródła: Prinz Eugen 1945 Blaszka fototrawiona na Eduardzie

Czytaj dalej

Liczba wyświetleń : 1122

Bokser MRAV Zestaw fototrawiony - Eduard 36215

Eduard

Ref 36215
TypuModel wojskowy
Skali1/35
Temat

Bokser MRAV Zestaw fototrawiony

Model marki Eduard zestaw: Boxer MRAV Photoetched set – Eduard 36215.

Recommended for kit: HOBBY BOSS The Boxer is a German-Dutch multirole armoured fighting vehicle designed to accomplish a number of operations through the use of installable mission modules

Źródła: Bokser MRAV Zestaw fototrawiony na Eduard

Czytaj dalej

Liczba wyświetleń : 953

GMC Bofors 40mm Zestaw fototrawiony - Eduard 36208

Eduard

Ref 36208
TypeMilitary Model
Scale1/35
Subject

GMC Bofors 40mm Photoetched set

Model marki Eduard zestaw: GMC Bofors 40mm Photoetched set – Eduard 36208.

Recommended for kit: HOBBY BOSS The U.S. military decided to ask various companies to create a troops transport vehicle quickly available and convenient. In 1941, the GMC firm won and the production began. . The qualities of this vehicle were numerous: the use of a tarp to cover the cabin provided a real economy, compared to the use of sheet metal. Easily deployable, the GMC CCKW 353 could serve both as a troops transport vehicle, so as a medical evacuation vehicle, food and ammunition resupply vehicle. Sold around the world after the Second World War, the vehicle remained in service in many armies,some of the vehicles equip with the 40mm BOFORS,and working in france.

Czytaj dalej

Liczba wyświetleń : 1664

P-38J over Europe Limited Edition - Eduard 1170

Eduard

Ref 1170
TypuModel wojskowy
Skali1/48
Temat

P-38J over Europe Edycja limitowana

Model marki Eduard zestaw: P-38J over Europe Limited Edition – Eduard 1170.

Limited edition of the P-38J Lightning in the 1/48 scale is based on Academy plastic parts. The increasing value of that kit is made by the Eduard additional detailing sets (exclusively included in this kit only). The Eduard Brassin accessories covers the cockpit (pilot’s compartment bay, pilot’s seat, armor plate behind the seat, center wing section, radio equipment), the superchargers (the entire supercharger, plus the supercharger intakes located on the engine sides) and landing gear wheels (including the front wheel, with superb details on their discs, also as the fine tire pattern). The photoetched accessories (colored) contains the instrument panel and seatbelts, air intake strainers and structure of the coolers intakes, landing gear interior and various exterior details. The decal sheet, designed by Eduard and printed by Cartograf features six colorful and attractive markings for Lightnings serving with various USAAF units in the ETO

Źródła: Eduard

Czytaj dalej

Wyświetleń: 2634