Важкий евакуаційний вантажівка М1 - Фото та відео

Важка евакуаційна вантажівка M1
Країні	Сша
Роль	10-тонний евакуатор 6×6
Виробництва	1941-1945
Ні. Побудований	5,765

У 201 Kenworth 10-тонний 6×6 Важкий евакуаційний автомобіль (G116) (офіційно Heavy Wrecking Truck M1) був стандартним важким евакуатором армії США під час Другої світової війни. У 1950-х роках його замінили 5-тонні евакуатори.

Джерело: Важкий руйнівний вантажний автомобіль M1 у Вікіпедії

Ward LaFrance M1A1 Walk Around
Фотограф	Незнай
Локалізацією	Незнай
Фото	44

Ward LaFrance M1A1 01

Ward LaFrance M1A1 02

Ward LaFrance M1A1 03

Ward LaFrance M1A1 04

Ward LaFrance M1A1 05

Ward LaFrance M1A1 06

Ward LaFrance M1A1 07

Ward LaFrance M1A1 08

Ward LaFrance M1A1 09

Click on a photo and use the mouse scroll to view all photos

Зачекайте, шукаємо для вас важку аварійну вантажівку M1...

Ward LaFrance M1A1 Walk Around
Фотограф	Незнай
Локалізацією	Незнай
Фото	20

Читайте також:

General Characteristics

The Ward LaFrance M1 and its refined M1A1 variant were the standard heavy wreckers used by the US Army during World War II. Designed to recover and tow disabled light and medium tanks, as well as any other heavy wheeled vehicles, the M1A1 was vital for field maintenance and battlefield clearance.

Property	Value (M1A1 Series 5)
Роль	Heavy Wrecker / Recovery Vehicle
Виробник	Ward LaFrance Truck Corporation (Co-produced by Kenworth)
Entered Service (M1A1)	1943–1944
команда	2 (Driver, Operator)
Drive Configuration	6×6 (All-wheel drive)
Curb Weight	~14,200 kg (~31,200 lb)
Max Towed Load	~27,000 kg (~60,000 lb)

Powerplant and Mobility

Engine: Continental 22-R in-line 6-cylinder gasoline engine (overhead-valve type).
Displacement: 8.2 L (501 cu in).
Power Output: 108 kW (145 hp) at 2,400 rpm.
Transmission: Fuller 5-speed manual transmission with a separate 2-speed transfer case (10 forward speeds total).
Maximum Speed: 72 km/h (45 mph).
Range: Approximately 400 km (250 miles).
Brakes: Full air brakes (Bendix-Westinghouse system).
Cab Type: Open “torpedo” cab with a folding canvas top (a key visual difference from the earlier closed-cab M1).

Recovery Equipment

Front Winch: Capacity of 9,100 kg (20,000 lb). Used for self-recovery or pulling vehicles toward the front.
Rear Crane: Gar Wood single boom, hydraulically (later motor) operated.
- Crane Winch Capacity: 21,500 kg (47,500 lb).
- Crane Lifting Capacity: Up to 7,300 kg (16,000 lb) at short radius.
- Slew: 180-degree traverse.
Tools: Carried one of the largest on-vehicle inventories of tools and equipment, including welding/cutting torches (oxygen/acetylene bottles), block and tackle, tow bars (A-frames), and various specialized recovery tools.
Stabilization: Equipped with outriggers at the rear and boom jacks to stabilize the truck during heavy lifts.